The FORGE team is making these fracture models available to researchers wanting a set of natural fractures in the FORGE reservoir for use in their own modeling work. They have been used to predict stimulation distances during hydraulic stimulation at the open toe section of well 16A(78)-32. This is a simplified DFN (discrete fracture network) dataset, that was generated using FracMan, for Utah FORGE well 16A(78)-32. A short, well-illustrated, report describing the data is also included in the provided archive file.

This dataset includes the data and a report on the large upscaled discrete fracture network modeling done for the Utah FORGE project in 2023. The FORGE modeling team is making five discrete fracture network (DFN) realizations of a large reservoir model available to researchers. These models have been upscaled to a continuum mesh or grid at resolutions of 10 meters and 20 meters providing reservoir properties for fracture porosity, permeability, and compressibility. The models are available in both the reference global coordinate frame and a local coordinate frame aligned with principal stress directions.

This dataset includes the data and a report on the large upscaled discrete fracture network modeling done for the Utah FORGE project in 2023. The FORGE modeling team is making five discrete fracture network (DFN) realizations of a large reservoir model available to researchers. These models have been upscaled to a continuum mesh or grid at resolutions of 10 meters and 20 meters providing reservoir properties for fracture porosity, permeability, and compressibility. The models are available in both the reference global coordinate frame and a local coordinate frame aligned with principal stress directions.

Design and Implementation of Innovative Stimulation Treatments to Maximize Energy Recovery Efficiency at the Utah Forge Site

This dataset includes files used to fit planar fractures through the preliminary earthquake catalogs of the three stages of the April 2022 well 16A(78)-32 stimulation which is linked bellow. These planar features have been used to update the FORGE reference Discrete Fracture Network (DFN) model. The files are provided to encourage other modelers to use additional workflows to find additional/alternative features. To this end, the dataset includes the cleaned earthquake catalog data translated to the FORGE reference model global reference frame, the well trajectory of 16A(78)-32 in those same coordinates, the fit 15 planar features in csv format, and a pdf file with slides illustrating the process used to fit the features. A recorded presentation of this material is available from the October 2022 FORGE Modeling and Simulation Forum which is also linked below.

This dataset includes files used to fit planar fractures through the preliminary earthquake catalogs of the three stages of the April 2022 well 16A(78)-32 stimulation which is linked bellow. These planar features have been used to update the FORGE reference Discrete Fracture Network (DFN) model. The files are provided to encourage other modelers to use additional workflows to find additional/alternative features. To this end, the dataset includes the cleaned earthquake catalog data translated to the FORGE reference model global reference frame, the well trajectory of 16A(78)-32 in those same coordinates, the fit 15 planar features in csv format, and a pdf file with slides illustrating the process used to fit the features. A recorded presentation of this material is available from the October 2022 FORGE Modeling and Simulation Forum which is also linked below.

The FORGE team is making these fracture models available to researchers wanting a set of natural fractures in the FORGE reservoir for use in their own modeling work. They have been used to predict stimulation distances during hydraulic stimulation at the open toe section of well 16A(78)-32. These fracture sets are fully stochastic and do not contain the deterministic set that matches the pilot well 58-32 FMI data. Well 58-32 has been completed and 16A(78)-32 is to be drilled as part of Phase 3. The original .fab files are not included due to redundancy. The *.fabgz data for the 800m and 1200m depth areas are in the native FracMan format and have been compressed using Gzip. Filtered data for the 800m depth area includes .csv spreadsheets, native FracMan (.fab), and GOCAD (.ts) files that are in a compressed zip format. The file titled "SGW 2020 Finnila and Podgorney DFN fracture files on GDR.pdf" is a description of the data and should be reviewed prior to data use.

The FORGE team is making these fracture models available to researchers wanting a set of natural fractures in the FORGE reservoir for use in their own modeling work. They have been used to predict stimulation distances during hydraulic stimulation at the open toe section of well 16A(78)-32. These fracture sets are fully stochastic and do not contain the deterministic set that matches the pilot well 58-32 FMI data. Well 58-32 has been completed and 16A(78)-32 is to be drilled as part of Phase 3. The original .fab files are not included due to redundancy. The *.fabgz data for the 800m and 1200m depth areas are in the native FracMan format and have been compressed using Gzip. Filtered data for the 800m depth area includes .csv spreadsheets, native FracMan (.fab), and GOCAD (.ts) files that are in a compressed zip format. The file titled "SGW 2020 Finnila and Podgorney DFN fracture files on GDR.pdf" is a description of the data and should be reviewed prior to data use.

The Utah FORGE 2025 v1 DFN (fracture model) includes 131 discrete planar fractures which were identified using combined site data sets to capture flow pathways between wells 16A(78)-32 and 16B(78)-32 following stimulation activities in 2022 and 2024. It also includes stochastic fractures (radius 20-150 m) away from well control. The DFN details fracture geometry such as position, orientation, and size, but does not address hydraulic properties like aperture, permeability, or compressibility, which may vary within each fracture plane. Further information and figures illustrating various fracture subsets are available in the accompanying notes document.

This dataset includes reports and a slide presentation on discrete fracture network (DFN) generation and hydraulic fracture modeling at the Utah FORGE site. It details the characterization of natural fractures using well log and core data, as well as stochastic modeling techniques. The reports describe simulations of hydraulic fracture propagation, fluid-mechanical interactions, and induced microseismicity. The dataset also includes history-matching of net pressure and analyses of fracture growth in naturally fractured geothermal reservoirs. The slides summarize key findings and future research directions.