The data from MPI for this dataset were received as text files each containing spectra of a single instrument mode (there were several files for most modes). These spectra were reformatted into binary tables, and all spectra from each mode were combined into a single file. The original order of the spectra has been preserved. Spacecraft time, relative to switch-on of the instrument is specified as 1 clock tick = 0.11852 seconds. The exact equation is:

The data from MPI for this dataset were received as text files each containing spectra of a single instrument mode (there were several files for most modes). These spectra were reformatted into binary tables, and all spectra from each mode were combined into a single file. The original order of the spectra has been preserved. Spacecraft time, relative to switch-on of the instrument is specified as 1 clock tick = 0.11852 seconds. The exact equation is:

The data from MPI for this dataset were received as text files each containing spectra of a single instrument mode (there were several files for most modes). These spectra were reformatted into binary tables, and all spectra from each mode were combined into a single file. The original order of the spectra has been preserved. Spacecraft time, relative to switch-on of the instrument is specified as 1 clock tick = 0.11852 seconds. The exact equation is:

The data from IKI for this dataset were received as two binary files containing data taken in all instrument modes. These files were split into separate files for each mode, preserving the original ordering of the spectra within the table. Spectra in each mode table are arranged chronologically, using TIME of the spectrum on the BLISI clock, in sec.

The data from IKI for this dataset were received as two binary files containing data taken in all instrument modes. These files were split into separate files for each mode, preserving the original ordering of the spectra within the table. Spectra in each mode table are arranged chronologically, using TIME of the spectrum on the BLISI clock, in sec.

The PUMA data were submitted by IKI in two unique forms, a GROUPS FITS file and undocumented binary file. In one original form, the data in this set were received as 4,027 separate FITS files, one for each spectrum. These files have been reformatted and combined into four tables, one for each of the PUMA instrument operating modes. Within each table, the spectra are in order of original FITS file number. This order is assumed to be chronological, based on time given by the BLISI clock, in sec.

The PIA data was acquired in four modes of data compression, termed mode 0 (the least compressed), and modes 1, 2, and 3, each with increasing degrees of compression. With each spectrum are a PIA assigned sequence number and event numbers, a unique ID-number, instrument settings, and the relative approach time. The PIA time is a 16-bit counter that starts with zero after switch-on. As the Spacecraft Time Signal (STS) is used to reset the internal PIA time counter, the TIM highest possible value is 48960 counts. STS-pulses are given after the transimssion of 256 formats. This results for format F1/F2 and high bitrate (46080 bps) in 5802.67 s. (= 256 formats * 64 frames * 2040 bytes * 8 bit/byte/46080 bps) The time resolution is DTIM = 1/ (138240 HZ /2**14 ) = 0.1185 s. Each STS defines the time for an event with TIM = 0. Therefore, SCET = GRT(STS) + (TIM * DTIM) - propogation delay (8:00.1 sec). where SCET = Spacecraft Event Time, GRT = Ground Reception Time.

The PIA data was acquired in four modes of data compression, termed mode 0 (the least compressed), and modes 1, 2, and 3, each with increasing degrees of compression. With each spectrum are a PIA assigned sequence number and event numbers, a unique ID-number, instrument settings, and the relative approach time. The PIA time is a 16-bit counter that starts with zero after switch-on. As the Spacecraft Time Signal (STS) is used to reset the internal PIA time counter, the TIM highest possible value is 48960 counts. STS-pulses are given after the transimssion of 256 formats. This results for format F1/F2 and high bitrate (46080 bps) in 5802.67 s. (= 256 formats * 64 frames * 2040 bytes * 8 bit/byte/46080 bps) The time resolution is DTIM = 1/ (138240 HZ /2**14 ) = 0.1185 s. Each STS defines the time for an event with TIM = 0. Therefore, SCET = GRT(STS) + (TIM * DTIM) - propogation delay (8:00.1 sec). where SCET = Spacecraft Event Time, GRT = Ground Reception Time.

This data set contains magnetic field vectors acquired by the Galileo magnetometer at the Io flyby on Dec 7 (341), 1995 and for the remainder of the mission after the Phase 2 flight Software load in May 1996. Packetized data replaced the Experimenter Data Records (EDRs) that were the raw data product in Phase 1. These are raw data provided in their original packet form. Processing done internal to the instrument remains in the data set.

This data set contains magnetic field vectors acquired by the Galileo magnetometer at the Io flyby on Dec 7 (341), 1995 and for the remainder of the mission after the Phase 2 flight Software load in May 1996. Packetized data replaced the Experimenter Data Records (EDRs) that were the raw data product in Phase 1. These are raw data provided in their original packet form. Processing done internal to the instrument remains in the data set.