The Woods Hole Oceanographic Institution has built the Martha's Vineyard Coastal Observatory (MVCO) near South Beach in Edgartown, Massachusetts. The project was initiated by scientists in the Coastal and Ocean Fluid Dynamics Laboratory (COFDL) at WHOI, who will use the observatory to study coastal atmospheric and oceanic processes. Specifically, the observatory is expected to: * Provide a local climatology for intensive, short duration field campaigns. * Further facilitate regional studies of coastal processes by providing infrastructure that supports easy access to electrical power and data. * Provide a reliable system of rugged sensors that allow opportunistic sampling of extreme events. * Provide continuous long term (25-30 years) observations for climate studies. * Provide a flexible system capable of supporting a wide range of instrumentation and platforms, such as AUV docking stations. * Provide a means for public outreach and educational programs. * Contribute to a larger network of observatories and platforms for real-time observations that can help verify and improve ocean and atmospheric models. The MVCO includes a small shore lab located between the hangars at Katama Air Park, a 10-m meteorological mast near the South Beach Donnelly House, a subsurface node mounted in 12-m water depth approximately 1.5 km south of Edgartown Great Pond, and an air-sea interaction tower (ASIT) equipped with a top-side node to allow access to air-side or underwater instrumentation at the 15-m isobath. The meteorological and subsea instrumentation are connected directly to the shore lab via a buried electro-optic power cable. The core set of instruments at the meteorological mast measure wind speed and direction, temperature, humidity, precipitation, CO2, solar and IR radiation, momentum, heat, and moisture fluxes. The core oceanographic sensors at the 12-m offshore node measure current profiles, waves, temperature, salinity, and near-bottom wave-orbital and low frequency currents. In addition to the core set of instruments, the offshore nodes and the meteorological mast act as extension cords into the coastal environment, allowing connection of a wide range of instruments for prolonged deployments. (Reference: http://www.whoi.edu/mvco/description/description2.html)

The USGS Woods Hole Science Center conducted a nearshore geophysical survey offshore of the southern coast of Martha's Vineyard, in the vicinity of the Martha's Vineyard Coastal Observatory (MVCO) in August 2007. This mapping program was part of a larger research effort supporting the Office of Naval Research (ONR) Ripples Directed-Research Initiative (DRI) studies at MVCO by providing data collection and modeling. The geophysical data will be used to provide initial conditions for wave and circulation models for the study area. Ultimately, geophysical mapping, oceanographic measurements and modeling will help to improve our understanding of coastal sediment-transport processes. The geophysical mapping utilized a suite of high-resolution instrumentation to map the surficial sediment distribution, depth and sub-surface geology: dual-frequency 100/500 KHz sidescan-sonar system, 234-KHz interferometric sonar, and 500 Hz -12 KHz chirp sub-bottom profiler. The survey was conducted aboard the M/V Megan Miller August 9-13, 2007. The study area covers 35 square kilometers from about 0.2 km to 5-km offshore of the south shore of Martha's Vineyard, and ranges in depth from ~ 5 to 20 meters.

The USGS Woods Hole Science Center conducted a nearshore geophysical survey offshore of the southern coast of Martha's Vineyard, in the vicinity of the Martha's Vineyard Coastal Observatory (MVCO) in August 2007. This mapping program was part of a larger research effort supporting the Office of Naval Research (ONR) Ripples Directed-Research Initiative (DRI) studies at MVCO by providing data collection and modeling. The geophysical data will be used to provide initial conditions for wave and circulation models for the study area. Ultimately, geophysical mapping, oceanographic measurements and modeling will help to improve our understanding of coastal sediment-transport processes. The geophysical mapping utilized a suite of high-resolution instrumentation to map the surficial sediment distribution, depth and sub-surface geology: dual-frequency 100/500 KHz sidescan-sonar system, 234-KHz interferometric sonar, and 500 Hz -12 KHz chirp sub-bottom profiler. The survey was conducted aboard the M/V Megan Miller August 9-13, 2007. The study area covers 35 square kilometers from about 0.2 km to 5-km offshore of the south shore of Martha's Vineyard, and ranges in depth from ~ 5 to 20 meters.

These data were collected under a cooperative agreement with the Massachusetts Office of Coastal Zone Management (CZM) and the U.S. Geological Survey (USGS), Coastal and Marine Geology Program. The primary objective of this program, initiated in 2003, is to develop regional geologic framework information for the management of coastal and marine resources. Accurate data and maps of sea-floor geology are important first steps toward protecting fish habitat, delineating marine resources, and assessing environmental changes due to natural or human effects. The project is focused on the inshore waters (5-30 meters deep) of Massachusetts. Data collected for the mapping cooperative have been released in a series of USGS Open-File Reports (http://woodshole.er.usgs.gov/project-pages/coastal_mass/html/current_map.html). This spatial dataset is from the study area located in Buzzards Bay and Vineyard Sound Massachusetts, and consists of ground-validation data which include the spatial extent of sea-floor sediment sample analyses, the location of sea-floor bottom photographs, and the tracklines along which sea-floor video was collected. These ground-validation (or ground-truth) data accompany a suite of high-resolution geophysical data, including swath bathymetry, sidescan-sonar backscatter intensity, and seismic-reflection data that were released in USGS Open File Reports 2012-1002 and 2012-1006. The sea-floor sampling data were collected during USGS survey 2010-005-FA in 2010 and cover more than 750 square kilometers of the inner continental shelf where the geophysical data were collected in 2009 and 2010.

The Massachusetts Office of Coastal Zone Management launched the Shoreline Change Project in 1989 to identify erosion-prone areas of the coast. The shoreline position and change rate are used to inform management decisions regarding the erosion of coastal resources. In 2001, a shoreline from 1994 was added to calculate both long- and short-term shoreline change rates along ocean-facing sections of the Massachusetts coast. In 2013, two oceanfront shorelines for Massachusetts were added using 2008-9 color aerial orthoimagery and 2007 topographic lidar datasets obtained from the National Oceanic and Atmospheric Administration's Ocean Service, Coastal Services Center. This 2018 data release includes rates that incorporate two new mean high water (MHW) shorelines for the Massachusetts coast extracted from lidar data collected between 2010 and 2014. The first new shoreline for the State includes data from 2010 along the North Shore and South Coast from lidar data collected by the U.S. Army Corps of Engineers (USACE) Joint Airborne Lidar Bathymetry Technical Center of Expertise. Shorelines along the South Shore and Outer Cape are from 2011 lidar data collected by the U.S. Geological Survey's (USGS) National Geospatial Program Office. Shorelines along Nantucket and Martha’s Vineyard are from a 2012 USACE Post Sandy Topographic lidar survey. The second new shoreline for the North Shore, Boston, South Shore, Cape Cod Bay, Outer Cape, South Cape, Nantucket, Martha’s Vineyard, and the South Coast (around Buzzards Bay to the Rhode Island Border) is from 2013-14 lidar data collected by the (USGS) Coastal and Marine Geology Program. This 2018 update of the rate of shoreline change in Massachusetts includes two types of rates. Some of the rates include a proxy-datum bias correction, this is indicated in the filename with “PDB”. The rates that do not account for this correction have “NB” in their file names. The proxy-datum bias is applied because in some areas a proxy shoreline (like a High Water Line shoreline) has a bias when compared to a datum shoreline (like a Mean High Water shoreline). In areas where it exists, this bias should be accounted for when calculating rates using a mix of proxy and datum shorelines. This issue is explained further in Ruggiero and List (2009) and in the process steps of the metadata associated with the rates. This release includes both long-term (~150 years) and short term (~30 years) rates. Files associated with the long-term rates have “LT” in their names, files associated with short-term rates have “ST” in their names.

This data release provides the region of interest (ROI), transects, and the reference shoreline for five groin field sites of around the United States (Ventura, CA, Newport Beach, CA, Santa Monica, CA, Long Branch, NJ, Sandwich, MA). GeoJSON files are derived from CoastSeg version 1.2.16. (Fitzpatrick and others, 2024) with settings derived from config files. These files contain the region of interests (ROIs), transects, and reference shorelines for each section. CoastSeg collects satellite images from Google Earth Engine to create shoreline data along with user-supplied inputs based on the CoastSat methodology (Vos and others, 2019). Data have been tidally corrected based on beach foreshore slopes. Data can be viewed in a GIS software such as QGIS or ArcGIS.

The Massachusetts Office of Coastal Zone Management launched the Shoreline Change Project in 1989 to identify erosion-prone areas of the coast and support local land-use decisions. Trends of shoreline position over long and short-term timescales provide information to landowners, managers, and potential buyers about possible future impacts to coastal resources and infrastructure. In 2001, a 1994 shoreline was added to calculate both long- and short-term shoreline change rates along ocean-facing sections of the Massachusetts coast. In 2013 two oceanfront shorelines for Massachusetts were added using 2008-2009 color aerial orthoimagery and 2007 topographic lidar datasets obtained from NOAA's Ocean Service, Coastal Services Center. In 2018, two new mean high water (MHW) shorelines for the Massachusetts coast extracted from lidar data between 2010-2014 were added to the dataset. This 2021 data release includes rates that incorporate one new shoreline from lidar data extracted in 2018 by the U.S. Army Corps of Engineers (USACE) Joint Airborne Lidar Bathymetry Technical Center of Expertise (JALBTCX), added to the existing database of all historical shorelines (1844-2014), for the North Shore, South Shore, Cape Cod Bay, Outer Cape, Buzzard’s Bay, South Cape, Nantucket, and Martha’s Vineyard. 2018 lidar data did not cover the Boston or Elizabeth Islands regions. Included in this data release is a proxy-datum bias reference line that accounts for the positional difference in a proxy shoreline (the high water Line shoreline) and a datum shoreline (the mean high water shoreline. This issue is explained further in Ruggiero and List (2009) and in the process steps of the metadata associated with the rates. This release includes both long-term (~150+ years) and short term (~30 years) rates. Files associated with the long-term rates have “LT” in their names, files associated with short-term rates have "ST” in their names.

The Massachusetts Office of Coastal Zone Management launched the Shoreline Change Project in 1989 to identify erosion-prone areas of the coast and support local land-use decisions. Trends of shoreline position over long and short-term timescales provide information to landowners, managers, and potential buyers about possible future impacts to coastal resources and infrastructure. In 2001, a 1994 shoreline was added to calculate both long- and short-term shoreline change rates along ocean-facing sections of the Massachusetts coast. In 2013 two oceanfront shorelines for Massachusetts were added using 2008-2009 color aerial orthoimagery and 2007 topographic lidar datasets obtained from NOAA's Ocean Service, Coastal Services Center. In 2018, two new mean high water (MHW) shorelines for the Massachusetts coast extracted from lidar data between 2010-2014 were added to the dataset. This 2021 data release includes rates that incorporate one new shoreline from lidar data extracted in 2018 by the U.S. Army Corps of Engineers (USACE) Joint Airborne Lidar Bathymetry Technical Center of Expertise (JALBTCX), added to the existing database of all historical shorelines (1844-2014), for the North Shore, South Shore, Cape Cod Bay, Outer Cape, Buzzard’s Bay, South Cape, Nantucket, and Martha’s Vineyard. 2018 lidar data did not cover the Boston or Elizabeth Islands regions. Included in this data release is a proxy-datum bias reference line that accounts for the positional difference in a proxy shoreline (the high water Line shoreline) and a datum shoreline (the mean high water shoreline. This issue is explained further in Ruggiero and List (2009) and in the process steps of the metadata associated with the rates. This release includes both long-term (~150+ years) and short term (~30 years) rates. Files associated with the long-term rates have “LT” in their names, files associated with short-term rates have "ST” in their names.