The Wyoming statewide time-stamped oil and gas wells shapefile was developed to provide a historical perspective of drilling activity for the Wyoming Landscape Conservation Initiative (WLCI). This product approximates start and stop dates for each well in Wyoming based on database attributes. These data originated from the Wyoming Oil and Gas Conservation Commission (WOGCC). Data represent 120 years of oil and gas drilling (1900 to 2020) and will facilitate a landscape-level approach to integrated science-based assessments, resource management, and land-use decision making. Oil and gas data from WOGCC were used in a dataset previously published by Biewick in 2010 (https://pubs.usgs.gov/ds/625/). This product expands the timeframe of drilling acitivity to 2020, compared to the earlier publication end date of 2010. We extended start and stop dates through 2020 and used a different process to extract start and stop information (detailed in the Process Description portion of Data Quality Information). We did not have access to last completion date (date of the last completion report filing) and did not include production information.

This data release contains the boundaries of assessment units and input data for the assessment of undiscovered oil and gas resources in the Mesaverde Group and Lance Formation in the Southwestern Wyoming Province, Wyoming, Utah, and Colorado. The assessment unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The assessment unit is defined within the context of the higher-level Total Petroleum System. The assessment unit is shown herein as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The assessment unit boundary is defined geologically as the limits of the geologic elements that define the assessment unit, such as reservoir rock, geologic structures, source rock, and seal lithologies. The only exception to this are assessment units that border a Federal-State water boundary. In these cases, the Federal-State water boundary forms part of the assessment unit boundary. In addition to the shapefile, for U.S. assessments, allocation tables are provided that enumerate percentages assigned to various land categories. Machine-readable tables are also provided that contain the input and results for each assessment unit summarized in the USGS Fact Sheet. Methodology for assessments are documented in USGS Data Series 547 for continuous assessments (https://pubs.usgs.gov/ds/547) and USGS DDS69-D, Chapter 21 for conventional assessments (https://pubs.usgs.gov/dds/dds-069/dds-069-d/REPORTS/69_D_CH_21.pdf). See supplemental information for a detailed list of files included in this data release.

This data release contains the boundaries of assessment units and input data for the assessment of undiscovered conventional and continuous oil and gas resources in in the Lewis Shale of the Southwestern Wyoming Province, Wyoming and Colorado. The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown herein as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic elements that define the Assessment Unit, such as reservoir rock, geologic structures, source rock, and seal lithologies. The only exceptions to this are Assessment Units that border a Federal-State water boundary. In these cases, the Federal-State water boundary forms part of the Assessment Unit boundary. In addition to the shapefile, for U.S. assessments, allocation tables are provided that enumerate percentages assigned to various land categories. Machine-readable tables are also provided that contain the input and results for each assessment unit summarized in the USGS Fact Sheet. Methodology of assessments are documented in USGS Data Series 547 for continuous assessments (https://pubs.usgs.gov/ds/547) and USGS DDS69-D, Chapter 21 for conventional assessments (https://pubs.usgs.gov/dds/dds-069/dds-069-d/REPORTS/69_D_CH_21.pdf). See supplemental information for a detailed list of files included this data release.

This data release contains the boundaries of assessment units and input data for the assessment of undiscovered conventional and continuous oil and gas resources in in the Lewis Shale of the Southwestern Wyoming Province, Wyoming and Colorado. The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown herein as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic elements that define the Assessment Unit, such as reservoir rock, geologic structures, source rock, and seal lithologies. The only exceptions to this are Assessment Units that border a Federal-State water boundary. In these cases, the Federal-State water boundary forms part of the Assessment Unit boundary. In addition to the shapefile, for U.S. assessments, allocation tables are provided that enumerate percentages assigned to various land categories. Machine-readable tables are also provided that contain the input and results for each assessment unit summarized in the USGS Fact Sheet. Methodology of assessments are documented in USGS Data Series 547 for continuous assessments (https://pubs.usgs.gov/ds/547) and USGS DDS69-D, Chapter 21 for conventional assessments (https://pubs.usgs.gov/dds/dds-069/dds-069-d/REPORTS/69_D_CH_21.pdf). See supplemental information for a detailed list of files included this data release.

A cells polygon feature class was created by the U. S. Geological Survey (USGS) to illustrate the degree of exploration, type of production, and distribution of production in the State of Indiana. Each cell represents a quarter-mile square of the land surface, and the cells are coded to represent whether the wells included within the cell are predominantly oil-producing, gas-producing, both oil and gas-producing, or the type of production of the wells located within the cell is unknown or dry. Cells were developed as a graphic solution to overcome the problem of displaying proprietary well data. No proprietary data are displayed or included in the cell maps. The data are current as of 2006.

A cells polygon feature class was created by the U. S. Geological Survey (USGS) to illustrate the degree of exploration, type of production, and distribution of production in the State of Indiana. Each cell represents a quarter-mile square of the land surface, and the cells are coded to represent whether the wells included within the cell are predominantly oil-producing, gas-producing, both oil and gas-producing, or the type of production of the wells located within the cell is unknown or dry. Cells were developed as a graphic solution to overcome the problem of displaying proprietary well data. No proprietary data are displayed or included in the cell maps. The data are current as of 2006.

This file contains points that describe locations of oil shale core holes, rotary holes, and surface sections in the state of Wyoming and is available as an ESRI shapefile, Google Earth KMZ file, and ASCII text file.

This file contains points that describe locations of oil shale core holes, rotary holes, and surface sections in the state of Wyoming and is available as an ESRI shapefile, Google Earth KMZ file, and ASCII text file.

This data release contains the boundary of the assessment unit and input data for the assessment of continuous gas resources in the Phosphoria formation of the Southwestern Wyoming province. The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown herein as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic elements that define the Assessment Unit, such as limits of reservoir rock, geologic structures, source rock, and seal lithologies. The only exceptions to this are Assessment Units that border the Federal-State water boundary. In these cases, the Federal-State water boundary forms part of the Assessment Unit boundary. Methodology of assessments are documented in USGS Data Series 547 for continuous assessments (https://pubs.usgs.gov/ds/547) and USGS DDS69-D, Chapter 21 for conventional assessments (https://pubs.usgs.gov/dds/dds-069/dds-069-d/REPORTS/69_D_CH_21.pdf). See supplemental information for a detailed list of files included this data release.

This data release contains the boundary of the assessment unit and input data for the assessment of continuous gas resources in the Phosphoria formation of the Southwestern Wyoming province. The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown herein as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic elements that define the Assessment Unit, such as limits of reservoir rock, geologic structures, source rock, and seal lithologies. The only exceptions to this are Assessment Units that border the Federal-State water boundary. In these cases, the Federal-State water boundary forms part of the Assessment Unit boundary. Methodology of assessments are documented in USGS Data Series 547 for continuous assessments (https://pubs.usgs.gov/ds/547) and USGS DDS69-D, Chapter 21 for conventional assessments (https://pubs.usgs.gov/dds/dds-069/dds-069-d/REPORTS/69_D_CH_21.pdf). See supplemental information for a detailed list of files included this data release.