Flying bird breeding colonies on Macquarie Island. This is a polygon dataset stored in the Geographical Information System (GIS). Attributes include the species name and the time of the year during which breeding occurs. The species include Black-browed Albatross, Grey-headed albatross, Southern Giant-Petrel and Wandering Albatross.

This dataset contains the coastline of Macquarie Island and adjacent islands in WGS84 lat/long coordinates. The coastline was constructed from a variety of sources including SPOT satellite imagery, the Royal Australian Navy's AUS604 hydrographic chart, and photogrammetry using aerial photographs.

This dataset represents Weddell Seal haulout and pupping sites in the Vestfold Hills, Antarctica. The data were sourced from a dataset compiled by Samantha Lake and described by the metadata record 'Distribution of Weddell seals pupping at the Vestfold Hills'. She used a reporting grid described by the metadata record 'Weddell seal reporting grid of the Vestfold Hills, Antarctica' to show observations made over 24 years (pupping areas) and 28 years (non-breeding areas). The map Samantha produced of pupping areas is linked to the metadata record 'Distribution of Weddell seals pupping at the Vestfold Hills'. Polygons were generated by copying relevant grid rectangles from a digital version of the reporting grid, referring to the maps produced by Samantha; the grid rectangles used were those in which there had been greater than 20 observations (pupping), 17 observations (non-breeding). The data was used in an A3 map of the Vestfold Hills published by the Australian Antarctic Data Centre in October 2001 and which is available from a Related URL below. The data are included in the data available for download from a Related URL below. The data conform to the SCAR Feature Catalogue which includes data quality information. See a Related URL below. Data described by this metadata record has Dataset_id = 155. Each feature has a Qinfo number which, when entered at the 'Search datasets & quality' tab, provides data quality information for the feature.

A database containing sounding data around Macquarie Island. Track line data for each data source is included.

This database is a compendium of histories of known age seals (Southern elephant) from observations across the Southern Ocean but focussed on Macquarie Island, Marion Island, Heard Island, Mawson and the Vestfold Hills. At Macquarie Island 1000 seals were weighed per annum between 1993-2003 at birth and individually marked with two plastic flipper tags in the inter-digital webbing of their hind flippers. These tagged seals were weighed again at weaning, when length, girth, fat depth, and flipper measurements were made. Three weeks after weaning 2000 seals were permanently and individually marked by hot-iron branding. Recaptures and re-weighings of these known aged individuals were used to calculate growth and age-specific survival of the seals. Similar data were collected from elephant seals between 1950 and 1965 when seals were individually marked by hot-iron branding. Mark-recapture data from these cohorts were used to assess the demography of the declining population. Length and mass data were also collected for these cohorts and were used, for the first time, to assess the growth of individual seals without killing them. At Marion Island all the elephant seals have been individually marked with two plastic flipper tags in their rear flippers. Recaptures of these seals were used to compare survival at Marion and Macquarie Islands. At Heard Island, seals were branded between 1949-1953. Seal length was measured in feet and inches. Recaptures of seals were made up until 1955, and growth and age-specific survival was calculated. Survival data from Heard Island were compared with concurrent data from Macquarie Island. The database was held by the Australian Antarctic Data Centre, but was taken offline due to maintenance problems. A snapshot of the database was taken in January 2015 and stored in an access database and several csv files. This work was completed as part of ASAC project 90.

To quantify the post-breeding movements of adult female Antarctic females (Arctocephalus gazella) we tracked females using Biotrack GLS (geolocation) data loggers. Females were captured towards the end of the lactation period (March/April) and the GLS tag, affixed to a Dalton flipper tag, was deployed in the trailing edge of the left or right foreflipper. Tags were generally retrieved just prior to or after giving birth the following season. Data files were extracted from the tags using BASTrak software. .lig - light data .tem - temperature data .act - activity data Metadata for each individual include: Site, year, GLS ID, sex, age, deployment site, lat and long of deployment site, flipper tag number, deployment and retrieval times (GMT).

Over time there have been a number of tide gauges deployed at Macquarie Island Station. The data download files contain further information about the gauges, but some of the information has been summarised here. Note that this metadata record only describes tide gauge data from 1993 to 2007. More recent data are described elsewhere. Macquarie Island used Aquatrak and Druck tide gauges during this period. Documentation from the older metadata record: Documentation dated 2001-06-12 The Macquarie Island Tide Gauge System The Macquarie Island Tide Gauge was first commissioned in November 1993. Since then every year attempts have been made to improve the performance of the system. The next improvement involves the installation of radio modems to effect a network link to the tide gauge dataloggers. Other improvements planned are include using the wave guide temperatures to correct the water heights for variations in the velocity of sound in air due to temperature gradients in the waveguide. The system consists of two separate sensors contained in separate housings on a rock shelf on the northern side of Garden Cove. One of the sensors is an Aquatrack acoustic type and the other is a Druck pressure transducer. Both housings contain a Platypus Engineering data logger and a battery. The housings consist each of an Admiralty Bronze ring bolted down to a concrete plinth and a glass fibre reinforced cover held down by a single central bolt and nut. Primary power for both installations comes from a solar panel array mounted on the northern side of the rock ridge behind the rock shelf. The solar panels are attached to an aluminium frame which is bolted to a galvanized steel frame cemented into holes in the rock face. The bolts are made of nylon with nylon washers so that the aluminium frame is not in contact with the galvanized frame. Mounted below the panels is a sealed plastic box with a hinged door. A multicore data cable runs from this box to the tide gauge housings. This cable is run inside a length of plastic conduit along with the power cable. The conduit is concealed in the vegetation and at the lower level is cemented into slots cut into the rock The batteries in the housing are kept charged by the solar panels but are isolated via power diodes, one in each housing. Either or both of the housing batteries or only the solar panel battery may be removed without interruption to data logging. The voltage of either housing battery may be found by interrogation of the appropriate data logger. Tide Gauge Bore Holes. Both gauges obtain access to the ocean via an inclined hole about 12 metres long inclined at approximately 34 and 39 degrees to the horizontal. Both holes are lined with a plastic pipe which is normally not removable. In the Aquatrack sensor hole a 50mm ABS pressure pipe runs down inside the liner and is fitted with a brass strainer and orifice at the lower end. This strainer protrudes into the ocean somewhat clear of the sea floor (see figure). Inside the 50mm pipe runs a 15mm diameter plastic pipe. The bottom end of this is fitted with a 600mm length of red brass tubing and stops about 100mm from the orifice at the bottom of the pipe. The 15mm pipe is held central in the 50mm pipe by three armed spiders placed about every metre down the pipe. The top end of both pipes is secured by a flange with two O rings and stainless steel screws. On top of the 15mm pipe is mounted the Aquatrack acoustic sensor the 15mm pipe acting as a waveguide for sound pulses from the sensor (see figure ). The Aquatrack sensor measures the distance of the water surface from a reference point on the sensor. About one metre down the wave guide is a small hole. This has two functions. One is to act as vent to allow water to rise and fall in the wave guide and the other is to provide an acoustic reflection at a known distance down the wave guide. This allows compensation for velocity of sound changes due to temperature changes. The Aquatrak wave guide

This dataset contains the results from an investigation of the fishery off Macquarie Island. The data were obtained from the Austral Leader, an 85m long stern trawler, between December 1994 and February 1995. The aim of the fishing voyage was to determine whether sufficient catches could be made to enable dedicated voyages to the area to be profitable, and if time allowed to search for other fishable areas. The Austral Leader had been granted a licence by the Australian Fisheries Management Authority (AFMA) to fish in Commonwealth controlled waters within the Australian EEZ around Macquarie Island. A previous voyage in November-December 1994 had made a preliminary survey of the grounds surrounding the island. 59 tows were made in the vicinity of the island, and all but 10 were made in an area west of the island. No worthwhile catches were made in any other areas. The main species caught were the Patagonian Toothfish (Dissostichus eleginoides) and Rats Tails (Macrourus carinatus). Basic biological data were collected on the catches where possible including: standard and total length, sex, gonad maturity, and stomach contents. A Microsoft Access database containing data from this cruise, plus several others is available for download from the URL given below. The Entry ID's of the other metadata records also related to this data are: AADC-00038 AADC-00068 AADC-00073 AADC-00075 AADC-00080 AADC-00082 c88_data The fields in this dataset are: Cruises Date Location Latitude Longitude Species Gear Length Weight Sex Gonad Eye Otolith Stomach Lifestage Family

The populations of fur seals on Australia's two subantarctic islands were exterminated by uncontrolled sealing in the 19th century. Only in the latter half of the 20th century have populations commenced recovering. This project provides key information on the status and trends of recovering fur seal populations in the Southern Ocean, including information on the distribution of foraging effort, food and energy requirements, oceanographic determinants of demographic performance, ecological interactions with commercial fisheries, the extent, trends, processes and implications of hybridisation at Macquarie Island, and the status and trends in numbers of the threatened subantarctic fur seal. This dataset represents ARGOS tracking data of fur seals from Macquarie Island during 1997-1999. The tracking data are comprised of 28 data profiles. Taken from the abstract of the referenced paper: Antarctic Arctocephalus gazella and subantarctic Arctocephalus tropicalis fur seals breed sympatrically at Macquarie Island. The two species have different lactation strategies, the former rearing its pup in 4 months and the latter taking 10 months. The diet and at-sea foraging behaviour of these sympatric species was compared during the austral summer period when their pup rearing period overlapped. The prey of the two fur seal species was very similar, with fish dominating the diet. Themyctophid, Electrona subaspera, was the main prey item (93.9%) in all months of the study. There were no major differences in the diving behaviour between species. Both species foraged north of the island parallel to the Macquarie Ridge. Foraging activity was concentrated at two sites: (i) within 30 km north of the island; and (ii) at 60 km north. Most locations for overnight foraging trips were within 10 km of the colonies. The different lactation strategies of A. gazella and A. tropicalis allowed for flexibility in foraging behaviour. At Macquarie Island, the local marine environmental conditions have resulted in similar foraging behaviour for both species.

This database is a compendium of histories of known age seals (Weddell and Southern elephant) from observations across the Southern Ocean but focussed on Macquarie Island, Marion Island, Heard Island, Mawson and the Vestfold Hills. At Macquarie Island 1000 seals were weighed per annum between 1993-2003 at birth and individually marked with two plastic flipper tags in the inter-digital webbing of their hind flippers. These tagged seals were weighed again at weaning, when length, girth, fat depth, and flipper measurements were made. Three weeks after weaning 2000 seals were permanently and individually marked by hot-iron branding. Recaptures and re-weighings of these known aged individuals were used to calculate growth and age-specific survival of the seals. Similar data were collected from elephant seals between 1950 and 1965 when seals were individually marked by hot-iron branding. Mark-recapture data from these cohorts were used to assess the demography of the declining population. Length and mass data were also collected for these cohorts and were used, for the first time, to assess the growth of individual seals without killing them. At Marion Island all the elephant seals have been individually marked with two plastic flipper tags in their rear flippers. Recaptures of these seals were used to compare survival at Marion and Macquarie Islands. At Heard Island, seals were branded between 1949-1953. Seal length was measured in feet and inches. Recaptures of seals were made up until 1955, and growth and age-specific survival was calculated. Survival data from Heard Island were compared with concurrent data from Macquarie Island. The database was held by the Australian Antarctic Data Centre, but was taken offline due to maintenance problems. A snapshot of the database was taken in June 2018 and stored in an access database. This work was completed as part of ASAC project 90.