This record describes a single aggregated dataset of the geomorphic habitat environment (facies) for Australia's 7 states and territories: New South Wales, Victoria, Tasmania, Queensland, Northern Territory, South Australia, Western Australia. The classification system contains 12 easily identifiable and representative environments: Barrier/back-barrier, Bedrock, Central Basin, Channel, Coral, Flood- and Ebb-tide Delta, Fluvial (bay-head) Delta, Intertidal Flats, Mangrove, Rocky Reef, Saltmarsh/Saltflat, Tidal Sand Banks (and Unassigned). These types represent habitats found across all coastal systems in Australia. For the New South Wales region, 134 coastal waterways are described. Most of the estuaries of New South Wales are under intense land use pressure with approximately 80% of the State's population living near an estuary (NSW Dept of Land and Water Conservation) For the Victorian region, 54 coastal waterways are described. Most of the 54 coastal waterways have a "Modified" environmental condition (as opposed to "Near Pristine"), according to the National Land and Water Resources Audit definition. For the Tasmanian region, 88 coastal waterways are described. The majority of near pristine estuaries in Tasmania are located in the south and west of the State and on Cape Barren Island, according to the Department of Primary Industries, Water and Environment. For the Queensland region, 213 coastal waterways are described. Southern and central Great Barrier Reef lagoon coasts have a broad spectrum of river, tide and wave- dominated estuaries. For the Northern Territory region, 63 coastal waterways are described. Estuaries on the northern Arnhem Land, Gulf of Carpentaria coasts are predominantly tide-dominated estuaries, which vary greatly in size and floodplain characteristics. For the South Australia region, 36 coastal waterways are described. Most of the 36 coastal waterways have a "Modified" environmental condition (as opposed to "Near Pristine"), according to the National Land and Water Resources Audit definition. For the Western Australia region, 103 coastal waterways are described. Western Australia has a diverse range of Estuaries due to different climates. Ranging from mostly "near pristine" and tide influenced estuaries in the north to "near pristine" wave dominated estuaries in the southwest region.

This record describes a single aggregated dataset of the geomorphic habitat environment (facies) for Australia's 7 states and territories: New South Wales, Victoria, Tasmania, Queensland, Northern Territory, South Australia, Western Australia. The classification system contains 12 easily identifiable and representative environments: Barrier/back-barrier, Bedrock, Central Basin, Channel, Coral, Flood- and Ebb-tide Delta, Fluvial (bay-head) Delta, Intertidal Flats, Mangrove, Rocky Reef, Saltmarsh/Saltflat, Tidal Sand Banks (and Unassigned). These types represent habitats found across all coastal systems in Australia. For the New South Wales region, 134 coastal waterways are described. Most of the estuaries of New South Wales are under intense land use pressure with approximately 80% of the State's population living near an estuary (NSW Dept of Land and Water Conservation) For the Victorian region, 54 coastal waterways are described. Most of the 54 coastal waterways have a "Modified" environmental condition (as opposed to "Near Pristine"), according to the National Land and Water Resources Audit definition. For the Tasmanian region, 88 coastal waterways are described. The majority of near pristine estuaries in Tasmania are located in the south and west of the State and on Cape Barren Island, according to the Department of Primary Industries, Water and Environment. For the Queensland region, 213 coastal waterways are described. Southern and central Great Barrier Reef lagoon coasts have a broad spectrum of river, tide and wave- dominated estuaries. For the Northern Territory region, 63 coastal waterways are described. Estuaries on the northern Arnhem Land, Gulf of Carpentaria coasts are predominantly tide-dominated estuaries, which vary greatly in size and floodplain characteristics. For the South Australia region, 36 coastal waterways are described. Most of the 36 coastal waterways have a "Modified" environmental condition (as opposed to "Near Pristine"), according to the National Land and Water Resources Audit definition. For the Western Australia region, 103 coastal waterways are described. Western Australia has a diverse range of Estuaries due to different climates. Ranging from mostly "near pristine" and tide influenced estuaries in the north to "near pristine" wave dominated estuaries in the southwest region.

Inshore benthic habitat mapping of the Adelaide Mount Lofty Ranges (AMLR), Yorke Peninsula, Eyre Peninsula, Upper Spencer Gulf, Upper Gulf St Vincent, South East and Kangaroo Island as part of a wider DEWNR project to map specific areas of the South Australian inshore environments Habitat boundaries were interpreted from underwater features discernable on ortho-rectified aerial photographs. The data for the Upper Gulf St Vincent and Upper Spencer Gulf were captured between 2005 and 2007. AMLR data was captured between 2008 and 2009. South East data was captured between 2009 and 2010. Field observations and underwater video footage was used to capture the Upper Spencer Gulf and Upper Gulf St Vincent data. The AMLR data was captured from field observations, underwater video footage, acoustic mapping and sidescan sonar. The data sets were combined as part of a DENR Statewide project. Additional data was captured on Kangaroo Island during 2013 which included field observations and Underwater video footage. This data was added by regional staff using an adapted data schema that now includes species specific information.

Marine benthic habitat data for Tasmanian coastal waters from the LWM (Low water mark) to 40 metres in depth or 1.5 kms from shore. See 'Lineage' section of this record for full methodology and data dictionary. This data is also available via the Seamap Australia National Benthic Habitat Layer - a nationally consolidated benthic habitat map. https://metadata.imas.utas.edu.au/geonetwork/srv/eng/catalog.search#/metadata/4739e4b0-4dba-4ec5-b658-02c09f27ab9a

The Seamap Australia spatial data layer is a nationally synthesised data product of seafloor marine habitat data. Australian continental shelf benthic habitat layers in GIS format were collected from various stakeholders around the country. Through compiling all of these data sets, we established a controlled vocabulary, reviewed by ANDS and external independent assessors, to produce a national classification of marine habitats. This national marine habitat classification scheme complements work undertaken by the National Environmental Science Program (NESP) Marine Biodiversity Hub (Theme D). The Seamap Australia product is of national importance and highlights the diversity of benthic habitats around our marine estate. This is the first edition of a seafloor marine habitat data layer that seamlessly brings together data from each of Australia’s state and territory marine habitat databases. Seamap Australia is a constantly evolving product as we continuously improve our skills in standardising, collating and sharing marine spatial data. This record describes a static version of the Seamap Australia national data layer as of 28/11/2018. The most current version of the data is available from the Seamap Australia website [http://seamapaustralia.org/map]. We envisage that the 'live' product will be constantly developed and updated as future surveys continue to improve our knowledge of our vast marine estate.

This dataset corresponds to high resolution (10 m) raster shallow benthic and geomorphic habitat maps for Northern and Western Australia estimated from Sentinel 2 composite imagery from 2018 – 2023. Benthic classes include sand, rubble, rock, seagrass, coral/algae, microalgal mats and light seagrass. Geomorphic classes include deep, sediment slope, shallow lagoon, deep lagoon, inner reef flat, outer reef flat, reef crest, terrestrial reef flat, sheltered reef slope, plateau, back reef slope, small reef and rocky reef. This dataset covers the area from Houtman Abrolhos Islands in Western Australia through to the northwestern side of Cape York, including both offshore and inshore reef systems. Classifications are limited to shallow regions, just below lowest astronomical tide in turbid areas, and to 10 - 15 m in clear water areas. These maps were developed by extending the methods used in the Allen Coral Atlas (https://allencoralatlas.org/methods/) and the development of habitat maps for the Great Barrier Reef (GBR10 GBRMP Geomorphic, https://arcg.is/1jfWaa1, GBR10 GBRMP Benthic, https://arcg.is/1GOD4T1). The maps were produced using a semi-automated classification workflow implemented in Google Earth Engine, combining improved low-tide Sentinel-2 satellite imagery composites created by the Australian Institute of Marine Science (AIMS) (https://doi.org/10.26274/2bfv-e921), with Random Forest machine learning classifiers. The classification approach was regionally tailored across five subregions (Shark Bay, West, Northwest, Gulf, and Offshore) to account for differences in water column optical properties and habitat types. Classifications are aligned with updated reef and shallow sediment outlines produced by AIMS as part of this project, and follow conventions from the Allen Coral Atlas and Great Barrier Reef mapping projects, incorporating additional classes to better represent seagrass environments characteristic of this region. The workflow integrated expert visual interpretation of reference imagery, Object-Based Image Analysis (OBIA) for training data development, and iterative refinement through object-based cleanup rules and regional expert review. These maps are intended to support regional-scale habitat assessment, marine spatial planning, ecosystem modelling, environmental impact assessment, and prioritisation of monitoring efforts. The dataset provides a consistent and scalable baseline for future reef monitoring and contributes directly to the national reef mapping framework. This dataset is delivered in three parts: 1. Geomorphic Map (geomorphic/NW_NESP-MaC-3-17_UQ_Shallow-habitat_Geomorphic_2025.tif) High-resolution spatial classification of coral reef, rocky reef, and shallow sediment geomorphic zones across five subregions. The map features 14 classes: Deep Water, Sediment Slope, Shallow Lagoon, Deep Lagoon, Inner Reef Flat, Outer Reef Flat, Reef Crest, Terrestrial Reef Flat, Sheltered Reef Slope, Reef Slope, Plateau, Back Reef Slope, Small Reef, and Rocky Reef. Classifications were produced at 10 m spatial resolution and refined through three stages of cleanup, including object-based rules and expert-guided manual corrections. Geomorphic maps underwent accuracy assessment using validation points generated from expert-interpreted reference segments.,

Inshore benthic habitat mapping of the Adelaide Dolphin Sanctuary, Adelaide Mount Lofty Ranges (AMLR), Yorke Peninsula, Eyre Peninsula, Upper Spencer Gulf, Upper Gulf St Vincent, South East and Kangaroo Island, as part of a wider DEWNR project to map specific areas of the South Australian inshore environments.

Point data collected from video drops identifying benthic habitats such as seagrass, macroalgae and reef, collected during field work in 2007 to 2011. Used to support the Benthic Habitat Mapping project undertaken by DENR to map the nearshore benthic habitats of South Australia.

The SeaMap Tasmania project undertook mapping of seafloor habitats across the nearshore Tasmanian coastline (0-40 m) - the first state to compile a statewide asssimilated benthic habitat dataset. This initiative comprised of collating aerial photography (from archives), acoustic mapping, and conducting underwater video surveys and field-based visual observations. From this, 1:25,0000 scale habitat maps were created for shallow coastal water to within 1.5 km of the coastline (or 40m depth, which ever was arrived at first). Depth information was collected via acoustic methods and used to discriminate seafloor habitat type, in combination with scanned aerial photographs and towed video transects providing ground-truthing information. See 'Lineage' section of this record for full methodology and data dictionary. This data is also available via the Seamap Australia National Benthic Habitat Layer - a nationally consolidated benthic habitat map. https://metadata.imas.utas.edu.au/geonetwork/srv/eng/catalog.search#/metadata/4739e4b0-4dba-4ec5-b658-02c09f27ab9a

The Seamap Australia National Benthic Habitat Layer (NBHL) is a nationally synthesised database of seafloor habitat data, classified according to the Seamap Australia National Benthic Habitat Classification Scheme (https://vocabs.ardc.edu.au/viewById/129). In generating the Seamap Australia NBHL, datasets from data providers around Australia are collated and centrally hosted by IMAS (UTAS). Through time, some datasets become superseded by newer, more accurate data for the same region (improved data collection or processing methodology). This record aggregates all habitat datasets that have been collated as part of the Seamap Australia project, but are no longer considered the most accurate/up to date habitat for a particular region and have been superseded by another product. The parent record for the Seamap Australia NBHL provides an aggregation point for all "current" habitat datasets: https://metadata.imas.utas.edu.au/geonetwork/srv/eng/catalog.search#/metadata/4739e4b0-4dba-4ec5-b658-02c09f27ab9a