Inshore benthic habitat mapping of the Adelaide Dolphin Sanctuary, Adelaide Mount Lofty Ranges (AMLR), Yorke Peninsula, Eyre Peninsula, Upper Spencer Gulf, Upper Gulf St Vincent, South East and Kangaroo Island, as part of a wider DEWNR project to map specific areas of the South Australian inshore environments.

This record describes a single aggregated dataset of the geomorphic habitat environment (facies) for Australia's 7 states and territories: New South Wales, Victoria, Tasmania, Queensland, Northern Territory, South Australia, Western Australia. The classification system contains 12 easily identifiable and representative environments: Barrier/back-barrier, Bedrock, Central Basin, Channel, Coral, Flood- and Ebb-tide Delta, Fluvial (bay-head) Delta, Intertidal Flats, Mangrove, Rocky Reef, Saltmarsh/Saltflat, Tidal Sand Banks (and Unassigned). These types represent habitats found across all coastal systems in Australia. For the New South Wales region, 134 coastal waterways are described. Most of the estuaries of New South Wales are under intense land use pressure with approximately 80% of the State's population living near an estuary (NSW Dept of Land and Water Conservation) For the Victorian region, 54 coastal waterways are described. Most of the 54 coastal waterways have a "Modified" environmental condition (as opposed to "Near Pristine"), according to the National Land and Water Resources Audit definition. For the Tasmanian region, 88 coastal waterways are described. The majority of near pristine estuaries in Tasmania are located in the south and west of the State and on Cape Barren Island, according to the Department of Primary Industries, Water and Environment. For the Queensland region, 213 coastal waterways are described. Southern and central Great Barrier Reef lagoon coasts have a broad spectrum of river, tide and wave- dominated estuaries. For the Northern Territory region, 63 coastal waterways are described. Estuaries on the northern Arnhem Land, Gulf of Carpentaria coasts are predominantly tide-dominated estuaries, which vary greatly in size and floodplain characteristics. For the South Australia region, 36 coastal waterways are described. Most of the 36 coastal waterways have a "Modified" environmental condition (as opposed to "Near Pristine"), according to the National Land and Water Resources Audit definition. For the Western Australia region, 103 coastal waterways are described. Western Australia has a diverse range of Estuaries due to different climates. Ranging from mostly "near pristine" and tide influenced estuaries in the north to "near pristine" wave dominated estuaries in the southwest region.

Point data collected from video drops identifying benthic habitats such as seagrass, macroalgae and reef, collected during field work in 2007 to 2011. Used to support the Benthic Habitat Mapping project undertaken by DENR to map the nearshore benthic habitats of South Australia

Point data collected from video drops identifying benthic habitats such as seagrass, macroalgae and reef, collected during field work in 2007 to 2011. Used to support the Benthic Habitat Mapping project undertaken by DENR to map the nearshore benthic habitats of South Australia.

This dataset consists of polygons delineating the broad-scale regional marine habitats of selected areas in Western Australia, mostly in existing and proposed marine conservation reserve areas. Habitat mapping was carried out by various organisations, including DPAW, using a range of methodologies over many years. Diverse classifications and habitat descriptions were standardised to the DPaW broad-scale Shallow-water Marine Habitat Classification scheme (SMHC) (Bancroft, 2003) after initial habitat mapping and classification work had been done. Habitat polygons are classified to the broad-scale ecological Community level and where more detailed data exist, local-scale Functional Group level (Bancroft, 2003). Polygons were attributed with habitat class names only, textual descriptions of these classes are provided in this metadata statement and further in Bancroft (2003).

This dataset summarises benthic surveys in Yanyuwa Sea Country into 3 GIS shapefiles. (1) A point (site) shapefile describes seagrass presence/absence at 3248 sites surveyed by small vessel and helicopter. (2) The meadow shapefile describes attributes of 180 intertidal seagrass meadows. (3) The interpolation GeoTiff describes variation in seagrass biomass across the seagrass meadows. This project is a partnership between li-Anthawirriyarra rangers, Charles Darwin University, James Cook University, and Mabunji Aboriginal Resource Indigenous Corporation to map the intertidal habitats of the Yanyuwa Indigenous Protected Area (IPA), an area of profound importance to the Marra and Yanyuwa people and to the marine ecosystem of the Gulf of Carpentaria. Benthic habitat maps of Yanyuwa Country were produced, with a focus on seagrass. Report reference: Groom R, Carter A, Collier C, Firby L, Evans S, Barrett S, Hoffmann L, van de Wetering C, Shepherd L, Evans S, Anderson S. (2023) Mapping Critical Habitat in Yanyuwa Sea Country. Report to the National Environmental Science Program. Charles Darwin University, pp. 40. Available at: https://www.nespmarinecoastal.edu.au/wp-content/uploads/2023/07/NESP-MaC-Hub-Project-1.12_Groom-et-al-FINAL-REPORT.pdf Methods: The sampling methods used to study, describe and monitor seagrass meadows were developed by the TropWATER Seagrass Group and tailored to the location and habitat surveyed; these are described in detail in the relevant publications (https://research.jcu.edu.au/tropwater). Geographic Information System (GIS) All survey data were entered into a Geographic Information System (GIS) developed for Torres Strait using ArcGIS 10.8. Rectified colour satellite imagery of Yanyuwa Sea Country (Source: Allen Coral Atlas and ESRI), field notes and aerial photographs taken from the helicopter during surveys were used to identify geographical features, such as reef tops, channels and deep-water drop-offs, to assist in determining seagrass meadow boundaries. Three GIS layers were created to describe spatial features of the region: a site layer, seagrass meadow layer, and a seagrass biomass interpolation layer. Seagrass site layer This layer contains information on data collected at assessment sites. This layer includes: 1. Temporal survey details – Survey date; 2. Spatial position - Latitude/longitude; 3. Survey location; 4. Seagrass information including presence/absence of seagrass, above-ground biomass (total and for each species), percent cover of seagrass at each site and whether individual species were present/absent at a site; 5. Benthic macro-invertebrate information including the percent cover of hard coral, soft coral, sponges and other benthic macro invertebrates (e.g. ascidian, clam) at a site; 6. Algae information including percent cover of algae at a site and percent contribution of algae functional groups to algae cover at a site; 7. Open substrate – the percent cover of the site that had no flora or habitat forming benthic invertebrates present; 8. Dominant sediment type - Sediment type based on grain size visual assessment or deck descriptions. 9. Survey method and vessel 10. Relevant comments and presence/absence of megafauna and animals of interest (dugong, turtle, dolphin, evidence of dugong feeding trails); 11. Data custodians. Seagrass meadow layer Seagrass presence/absence site data, mapping sites, field notes, and satellite imagery were used to construct meadow boundaries in ArcGIS®. The meadow (polygon) layer provides summary information for all sites within each seagrass meadow, including: 1. Temporal survey details – Survey month and year as individual columns and the survey date (the date range the survey took place); 2. Spatial survey details – Survey location, meadow identification number that identifies the reef name and the meadow number. This allows individual meadows to be compared among years; 3. Survey method; 4. Meadow depth for subtidal meadows. Intertidal: meadow

The SeaMap Tasmania project undertook mapping of seafloor habitats across the nearshore Tasmanian coastline (0-40 m) - the first state to compile a statewide asssimilated benthic habitat dataset. This initiative comprised of collating aerial photography (from archives), acoustic mapping, and conducting underwater video surveys and field-based visual observations. From this, 1:25,0000 scale habitat maps were created for shallow coastal water to within 1.5 km of the coastline (or 40m depth, which ever was arrived at first). Depth information was collected via acoustic methods and used to discriminate seafloor habitat type, in combination with scanned aerial photographs and towed video transects providing ground-truthing information. See 'Lineage' section of this record for full methodology and data dictionary. This data is also available via the Seamap Australia National Benthic Habitat Layer - a nationally consolidated benthic habitat map. https://metadata.imas.utas.edu.au/geonetwork/srv/eng/catalog.search#/metadata/4739e4b0-4dba-4ec5-b658-02c09f27ab9a

The Seamap Australia spatial data layer is a nationally synthesised data product of seafloor marine habitat data. Australian continental shelf benthic habitat layers in GIS format were collected from various stakeholders around the country. Through compiling all of these data sets, we established a controlled vocabulary, reviewed by ANDS and external independent assessors, to produce a national classification of marine habitats. This national marine habitat classification scheme complements work undertaken by the National Environmental Science Program (NESP) Marine Biodiversity Hub (Theme D). The Seamap Australia product is of national importance and highlights the diversity of benthic habitats around our marine estate. This is the first edition of a seafloor marine habitat data layer that seamlessly brings together data from each of Australia’s state and territory marine habitat databases. Seamap Australia is a constantly evolving product as we continuously improve our skills in standardising, collating and sharing marine spatial data. This record describes a static version of the Seamap Australia national data layer as of 28/11/2018. The most current version of the data is available from the Seamap Australia website [http://seamapaustralia.org/map]. We envisage that the 'live' product will be constantly developed and updated as future surveys continue to improve our knowledge of our vast marine estate.

Marine benthic habitat data for Tasmanian coastal waters from the LWM (Low water mark) to 40 metres in depth or 1.5 kms from shore. See 'Lineage' section of this record for full methodology and data dictionary. This data is also available via the Seamap Australia National Benthic Habitat Layer - a nationally consolidated benthic habitat map. https://metadata.imas.utas.edu.au/geonetwork/srv/eng/catalog.search#/metadata/4739e4b0-4dba-4ec5-b658-02c09f27ab9a

The Seamap Australia National Benthic Habitat Layer (NBHL) is a nationally synthesised database of seafloor habitat data, classified according to the Seamap Australia National Benthic Habitat Classification Scheme (https://vocabs.ardc.edu.au/viewById/129). In generating the Seamap Australia NBHL, datasets from data providers around Australia are collated and centrally hosted by IMAS (UTAS). Through time, some datasets become superseded by newer, more accurate data for the same region (improved data collection or processing methodology). This record aggregates all habitat datasets that have been collated as part of the Seamap Australia project, but are no longer considered the most accurate/up to date habitat for a particular region and have been superseded by another product. The parent record for the Seamap Australia NBHL provides an aggregation point for all "current" habitat datasets: https://metadata.imas.utas.edu.au/geonetwork/srv/eng/catalog.search#/metadata/4739e4b0-4dba-4ec5-b658-02c09f27ab9a