This record describes multibeam echosounder data collected on RV Investigator voyage IN2017_E02, Gear Trials which departed Hobart on the 31-March-2017 and returned to Hobart on the 2-April-2017 The Kongsberg EM710 MKII multibeam echosounder was used to acquire seafloor bathymetry and backscatter information around the Huon marine reserve, south east Tasmania. The EM710 MKII provides a 0.5° by 1° transmit and receive angular resolution respectively. The echosounder's nominal frequency range is from 40 to 100 kHz. Data are stored in .all raw format for bathymetry and backscatter and .wcd format for watercolumn backscatter at CSIRO. There are 45 files totalling 4.06 GB of raw data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format are corrected for motion and position. Tide corrections [were/were not] applied to the processed data. Processed data has had outliers removed. Processed line data are available in *.gsf and ascii format, and processed bathymetry and backscatter grids in geotiff format. Additional information regarding this dataset, including further information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2016_T02, transit from Hobart to Sydney which departed Hobart on the 25 August 2016 and returned to Sydney on the 29 August 2016. The Kongsberg EM710 MKII multibeam echosounder was used to acquire seafloor bathymetry and backscatter information between Hobart and Sydney with a hydrographic survey performed near Flinders Island. The EM710 MKII provides a 0.5° by 1° transmit and receive angular resolution respectively. The echosounder's nominal frequency range is from 40 to 100 kHz. Data are stored in .all raw format for bathymetry and backscatter and .wcd format for watercolumn backscatter at CSIRO. There are 97 files totalling 11.9 GB of raw data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format are corrected for motion and position. Tide corrections were not applied to the processed data except for the area of the hydrographic survey near Flinders Island. Processed data had outliers removed. Processed line data are available in *.gsf and ascii format and processed bathymetry and backscatter grids in geotiff format. Additional information regarding this dataset including further information on processing streams is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2018_E02, titled 'MNF Trials and Calibrations' which departed Hobart on the 3rd of September 2018 and returned to Hobart on the 9th of September 2018. The Kongsberg EM710 multibeam echosounder was used to acquire seafloor bathymetry and backscatter information around south eastern Tasmania. The EM710 provides a 0.5° by 1° transmit and receive angular resolution respectively. The echosounder's nominal frequency range is from 70 to 100 kHz. Data are stored in *.all raw format for bathymetry and backscatter at CSIRO. There are 97 files totalling 15.4 GB of raw data in this dataset. Multibeam bathymetry calibrations were performed on this trial. Tide corrections were not applied to the processed data. Processed data had outliers removed. Processed line data is not available as they were trials for calibration. Additional information regarding this dataset, including further information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2017_E02, Gear Trials which departed Hobart on the 31-March-2017 and returned to Hobart on the 2-April-2017. The Kongsberg EM122 multibeam echosounder was used to acquire seafloor bathymetry, backscatter information between/around the Huon marine reserve, south east Tasmania. The EM122 provides a 1 degree by 1 degree angular resolution. The echosounder's nominal frequency is 12 kHz. Data are stored in .all raw format for bathymetry and backscatter and .wcd format for watercolumn backscatter at CSIRO. There are 42 files totalling 2.24 GB of raw data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format are corrected for motion and position. Tide corrections [were/were not] applied to the processed data. Processed data had outliers removed. Processed line data are available in *.gsf and ascii format, and processed bathymetry and backscatter grids in geotiff format. Additional information regarding this dataset, including information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2017_E04, Trials voyage, which departed Hobart on the 7th of December 2017 and returned to Hobart on the 11th of December 2017. The Kongsberg EM710 MKII multibeam echosounder was used to acquire seafloor bathymetry and backscatter information around southeast Tasmania. Patch test calibrations for the EM710 were performed on this voyage. The EM710 MKII provides a 0.5° by 1° transmit and receive angular resolution respectively. The echosounder's nominal frequency range is from 40 to 100 kHz. Data are stored in *.all raw format for bathymetry and backscatter at CSIRO. There are 34 files totaling 1.68 GB of raw data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format are corrected for motion and position. Tide corrections were not applied to the processed data. Processed data has had outliers removed. Processed line data are available in *.gsf and ascii format, and processed bathymetry and backscatter grids in geotiff format. Additional information regarding this dataset, including further information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2016_T02, transit from Hobart to Sydney which departed Hobart on the 25 August 2016 and arrived in Sydney on the 29 August 2016. The Kongsberg EM122 multibeam echosounder was used to acquire seafloor bathymetry, backscatter information between Hobart and Sydney. The EM122 provides a 1 degree by 1 degree angular resolution. The echosounder's nominal frequency is 12 kHz. Data are stored in .all raw format for bathymetry and backscatter and .wcd format for watercolumn backscatter at CSIRO. There are 70 files totaling 2.25 GB of raw data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format are corrected for motion and position. Tide corrections were not applied to the processed data. Processed data have had outliers removed. Processed line data are available in *.gsf and ascii format and processed bathymetry and backscatter grids in geotiff format. Additional information regarding this dataset including information on processing streams is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2018_E02, titled 'MNF Trials and Calibrations' which departed Hobart on the 3rd of September 2018 and returned to Hobart on the 9th of September 2018. The Kongsberg EM122 multibeam echosounder was used to acquire seafloor bathymetry, backscatter information [and watercolumn backscatter] around south eastern Tasmania. The EM122 provides a 1 degree by 1 degree angular resolution. The echosounder's nominal frequency is 12 kHz. Data are stored in .all raw format for bathymetry and backscatter and .wcd format for watercolumn backscatter at CSIRO. There are 68 files totalling 1.7 GB of raw data in this dataset. Multibeam bathymetry calibrations were performed on this trial. Tide corrections were not applied to the processed data. Processed data had outliers removed. Processed line data is not available as this was for calibration testing. Additional information regarding this dataset, including information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2018_E01, Triaxus Sea Acceptance Testing & Calibrations Voyage, which departed Hobart on the 9th June 2018 and returned to Hobart on the 11th June 2018. The Kongsberg EM710 MKII multibeam echosounder was used to acquire seafloor bathymetry and backscatter information for a small area off the southeast coast of Tasmania. The EM710 MKII provides a 0.5° by 1° transmit and receive angular resolution respectively. The echosounder's nominal frequency range is from 40 to 100 kHz. Data are stored in *.all raw format for bathymetry and backscatter at CSIRO. There are 7 files totalling 2.19 GB of raw data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format are corrected for motion and position. Tide corrections were not applied to the processed data. Processed data has had outliers removed. Processed line data are available in *.gsf and ascii format, and processed bathymetry and backscatter grids in geotiff format. Additional information regarding this dataset, including further information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2024_E01, 'Trials and Calibrations' which departed Hobart on the 28th October and returned to Hobart on the 6th November 2024. The Kongsberg EM2040-MKII multibeam echosounder was used to acquire seafloor bathymetry, backscatter information and watercolumn backscatter. NOTE: The system was newly installed in Singapore as part of the vessel's mid-life refit and this voyage constituted the formal Sea Acceptance Test (SAT) for the system. The EM2040 provides a 0.4 degree by 0.7 degree angular resolution. The echosounder's nominal frequency is 400 kHz (with a range of 200-700 kHz) and it operated in dual swath mode. Data are stored in .kmall raw format for bathymetry and backscatter and .kmwcd format for watercolumn backscatter at CSIRO. There are 135 files totalling 14.9 GB of raw data and 135 files totalling 287 GB of watercolumn data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.kmall format are corrected for motion and position. GPS tide was computed using the EGM2008 model and applied to the processed data. Processed data has had outliers removed. Additional information regarding this dataset, including further information on processing streams, is contained in the GSM data acquisition and processing report.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2017_E03, Equipment Commissioning Sea Trials, which departed Brisbane on the 20th August 2017 and returned to Brisbane on the 24th of August 2017. The Kongsberg EM710 MKII multibeam echosounder was used to acquire seafloor bathymetry and backscatter information off the coast of Brisbane. The EM710 MKII provides a 0.5° by 1° transmit and receive angular resolution respectively. The echosounder's nominal frequency range is from 40 to 100 kHz. Data are stored in *.all raw format for bathymetry and backscatter at CSIRO. There are 17 files totalling 1.73 GB of raw data in this dataset. A patch test calibration was performed for the EM710 during this voyage to obtain pitch, roll and yaw calibration values. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format are corrected for motion and position. Tide corrections were not applied to the processed data. Processed data has had outliers removed. Processed line data are available in *.gsf and ascii format, and processed bathymetry in geotiff format. Additional information regarding this dataset, including further information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.