This record describes multibeam echosounder data collected on RV Investigator voyage IN2016_V01, 'HEOBI: Heard Earth-Ocean-Biosphere Interactions' which departed Fremantle on the 8th January 2016 and returned to Hobart on the 27th February 2016. The Kongsberg EM710 multibeam echosounder was used to acquire seafloor bathymetry and backscatter information and watercolumn backscatter around Heard and Macdonald islands and between Fremantle and Hobart. The EM710 provides a 0.5° by 1° transmit and receive angular resolution respectively. The echosounder's nominal frequency range is from 70 to 100 kHz. Data are stored in .all raw format for bathymetry and backscatter and in .wcd format for watercolumn backscatter at the CSIRO. There are 923 files totalling 58.3 GB of raw data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format is corrected for motion and position. Tide corrections were not applied to the processed data. Processed data had outliers removed. Processed line data is available in *.gsf and ascii format and processed bathymetry and backscatter grids in geotiff format. Additional information regarding this dataset, including further information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on the RV Investigator voyage IN2023_V04, International nutrient inter-comparison Voyage (INIV) which departed Hobart on the 05/06/23 and returned to Hobart on the 18/06/23. The Kongsberg EM710 multibeam echosounder was used to acquire seafloor bathymetry and backscatter information and watercolumn backscatter in the Southern Ocean Southwest of Hobart. The EM710 provides a 0.5° by 1° transmit and receive angular resolution respectively. The echosounder's nominal frequency range is from 70 to 100 kHz. Data are stored in .all raw format for bathymetry and backscatter and .wcd format for watercolumn backscatter at CSIRO. There are 110 files totalling 90.3 GB of raw data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format is corrected for motion and position. Tide corrections [were/were not] applied to the processed data. Processed data had outliers removed. Processed line data are available in *.gsf and ascii format, and processed bathymetry and backscatter grids in geotiff format. Additional information regarding this dataset, including further information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes ME 70 scientific multibeam fisheries echosounder data collected on RV Investigator voyage IN2017_E03, Equipment Commissioning Sea Trials, which departed Brisbane on the 20th August 2017 and returned to Brisbane on the 24th of August 2017. The Simrad ME70 scientific multibeam echosounder acquired acoustic backscatter data through the water column using a variety of configurations for testing purposes. The echosounder's frequency range is from 70 kHz to 120 kHz. The ME70 logged sporadically for the extent of the voyage. Data are stored in Simrad *.raw format at CSIRO. There are 22 files totaling 1.56 GB of raw data in this dataset. No processing has been conducted on this data. Additional information regarding this dataset, including the settings used, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2024_V01, 'Multidisciplinary Investigations of the Southern Ocean' which departed Hobart on 05/01/2024 and returned to Fremantle on 05/03/2024. The Kongsberg EM122 multibeam echosounder was used to acquire seafloor bathymetry, backscatter information and watercolumn backscatter from Hobart, along the Antarctic ice edge to Fremantle. The EM122 provides a 1 degree by 1 degree angular resolution. The echosounder's nominal frequency is 12 kHz. Data are stored in .all raw format for bathymetry and backscatter and .wcd format for watercolumn backscatter at CSIRO. There are 1,199 files totalling 150.8 GB of raw data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in .all format are corrected for motion and position. GPS tide was computed using the EGM2008 model and applied to the processed data. Processed data has had outliers removed. Processed line data are available in .gsf and ascii format, and processed bathymetry grids in geotiff format. Additional information regarding this dataset, including further information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes ME 70 scientific multibeam fisheries echosounder data collected on RV Investigator voyage IN2018_E02, titled 'MNF Trials and Calibrations' which departed Hobart on the 3rd of September 2018 and returned to Hobart on the 9th of September 2018. The Simrad ME70 scientific multibeam echosounder acquired acoustic backscatter data through the water column as part of a series of trials and calibration testing. Data are stored in Simrad *.all raw format at CSIRO. There are 27 files totalling 2.3 GB of raw data in this dataset. No processing has been conducted on this data. Additional information regarding this dataset, including the settings used, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2017_C02, ['Hogan Group Hydrographic Survey – Bass Strait'] which departed Hobart on the 4th May 2017 and came alongside Bell Bay following completion of the survey on the 14th May 2017. The Kongsberg EM122 multibeam echosounder was used to acquire seafloor bathymetry, backscatter information [and watercolumn backscatter] around Bass Strait. The EM122 provides a 1 degree by 1 degree angular resolution. The echosounder's nominal frequency is 12 kHz. Data are stored in .all raw format for bathymetry and backscatter and .wcd format for watercolumn backscatter at CSIRO. There are 236 files totalling 9.5 GB of raw data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format are corrected for motion and position. Tide corrections were applied to the processed data. Processed data had outliers removed. Processed line data are not available in *.gsf and ascii format, however can be requested if required. Additional information regarding this dataset, including information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2015_C02, Great Australian Bight Research Program: GAB deep-water pelagic and benthic ecosystem study which departed which departed Port Lincoln on the 30 November 2015 and returned to Fremantle on the 22 December 2015. The Kongsberg EM710 MKII multibeam echosounder was used to acquire seafloor bathymetry and backscatter information around the Great Australian Bight. The EM710 MKII provides a 0.5° by 1° transmit and receive angular resolution respectively. The echosounder's nominal frequency range is from 40 to 100 kHz. Data are stored in *.all raw format for bathymetry and backscatter at CSIRO. There are 155 files totaling 11.4 GB of raw data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format are corrected for motion and position. Tide corrections were not applied to the processed data. Processed data has had outliers removed. Processed line data are available in *.gsf and ascii format, and processed bathymetry and backscatter grids in geotiff format. Additional information regarding this dataset, including further information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2023_V07, [FOCUS] which departed Hobart on the 15/11/23 and returned to Hobart on the 20/12/23. The Kongsberg EM122 multibeam echosounder was used to acquire seafloor bathymetry, backscatter information and watercolumn backscatter around the Antarctic Circumpolar Current in the Southern Ocean, South of Hobart. The EM710 MKII provides a 0.5° by 1° transmit and receive angular resolution respectively. The echosounder's nominal frequency range is from 40 to 100 kHz. Data are stored in .all raw format for bathymetry and backscatter and .wcd format for watercolumn backscatter at CSIRO. There are 55 files totalling 14.2 GB of raw data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in .all format are corrected for motion and position. GPS tide was computed using the EGM2008 model and applied to the processed data. Processed data has had outliers removed. Processed line data are available in .gsf and ascii format, and processed bathymetry grids in geotiff format. Additional information regarding this dataset, including further information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2023_E01, 'Sea Trials and Calibrations' which departed Fremantle on the 07/01/2023 and returned to Fremantle on the 12/01/2023. The Kongsberg EM122 multibeam echosounder was used to acquire seafloor bathymetry, backscatter information and watercolumn backscatter at various times and depths throughout the voyage. The EM122 provides a 1 degree by 1 degree angular resolution. The echosounder's nominal frequency is 12 kHz. Data are stored in .all raw format for bathymetry and backscatter and .wcd format for watercolumn backscatter at CSIRO. There are 69 files totalling 3.91 GB of raw data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format are corrected for motion and position. Tide corrections [were/were not] applied to the processed data. Processed data had outliers removed. Processed line data are available in *.gsf and ascii format, and processed bathymetry and backscatter grids in geotiff format. Additional information regarding this dataset, including information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2023_V07, [FOCUS] which departed Hobart on the 15/11/23 and returned to Hobart on the 20/12/23. The Kongsberg EM122 multibeam echosounder was used to acquire seafloor bathymetry, backscatter information and watercolumn backscatter around the Antarctic Circumpolar Current in the Southern Ocean, South of Hobart. The EM122 provides a 1 degree by 1 degree angular resolution. The echosounder's nominal frequency is 12 kHz. Data are stored in .all raw format for bathymetry and backscatter and .wcd format for watercolumn backscatter at CSIRO. There are 1834 files totalling 105 GB of raw data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in .all format are corrected for motion and position. GPS tide was computed using the EGM2008 model and applied to the processed data. Processed data has had outliers removed. Processed line data are available in .gsf and ascii format, and processed bathymetry grids in geotiff format. Additional information regarding this dataset, including further information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.