This record describes multibeam echosounder data collected on RV Investigator voyage IN2017_V03, 'Sampling the abyss: latitudinal biodiversity patterns along the base of Australia’s eastern continental margin' which departed Bell Bay on the 15 May 2017 and returned to Brisbane on the 16 June 2017. The Kongsberg EM710 MKII multibeam echosounder was used to acquire seafloor bathymetry and backscatter information at sampling sites along the East Coast of Australia, including several Commonwealth Marine Reserves. The EM710 MKII provides a 0.5° by 1° transmit and receive angular resolution respectively. The echosounder's nominal frequency range is from 40 to 100 kHz. Data are stored in *.all raw format for bathymetry and backscatter and at CSIRO. There are 53 files totalling 5.89 GB of raw data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format are corrected for motion and position. Tide corrections were not applied to the processed data. Processed data has had outliers removed. Processed line data are available in *.gsf and ascii format. Additional information regarding this dataset, including further information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2017_V03, 'Sampling the abyss: latitudinal biodiversity patterns along the base of Australia’s eastern continental margin' which departed Bell Bay on the 15 May 2017 and returned to Brisbane on the 16 June 2017. The Kongsberg EM122 multibeam echosounder was used to acquire seafloor bathymetry and backscatter information at sampling sites along the East Coast of Australia, including several Commonwealth Marine Reserves. The EM122 provides a 1 degree by 1 degree angular resolution. The echosounder's nominal frequency is 12 kHz. Data are stored in *.all raw format for bathymetry and backscatter at CSIRO. There are 675 files totalling 16.6 GB of raw data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format are corrected for motion and position. Tide corrections were not applied to the processed data. Processed data had outliers removed. Processed line data are available in *.gsf and ascii format. Additional information regarding this dataset, including information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on the RV Investigator voyage IN2023_V04, International nutrient inter-comparison Voyage (INIV) which departed Hobart on the 05/06/23 and returned to Hobart on the 18/06/23. The Kongsberg EM122 multibeam echosounder was used to acquire seafloor bathymetry, backscatter information and watercolumn backscatter in the Southern Ocean Southwest of Hobart. The EM122 provides a 1 degree by 1 degree angular resolution. The echosounder's nominal frequency is 12 kHz. Data are stored in .all raw format for bathymetry and backscatter and .wcd format for watercolumn backscatter at CSIRO. There are 799 files totalling 47.1 GB of raw data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format are corrected for motion and position. Tide corrections were applied to the processed data. Processed data had outliers removed. Processed line data are available in *.gsf and ascii format, and processed bathymetry and backscatter grids in geotiff format. Additional information regarding this dataset, including information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2017_T01, Natural iron fertilisation of oceans around Australia: linking terrestrial dust and bushfires to marine biogeochemistry, which departed Sydney on the 24th September 2017 and returned to Broome on the 8th October 2017. The Kongsberg EM710 MKII multibeam echosounder was used to acquire seafloor bathymetry and backscatter information and watercolumn backscatter between Sydney and Broome. The EM710 MKII provides a 0.5° by 1° transmit and receive angular resolution respectively. The echosounder's nominal frequency range is from 40 to 100 kHz. Data are stored in .all raw format for bathymetry and backscatter and .wcd format for watercolumn backscatter at CSIRO. There are 348 files totalling 69.8 GB of raw .all data and 22 files totaling 9.75GB of wcd watercolumn data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format are corrected for motion and position. Tide corrections were not applied to the processed data except for one area of interest as specified in the processing report. Processed data has had outliers removed. Processed line data are available in *.gsf and ascii format, and processed bathymetry and backscatter grids in geotiff format. Additional information regarding this dataset, including further information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2019_V01, The availability of Antarctic krill to large predators and their role in biogeochemical recycling in the Southern Ocean which departed Hobart on the 19th January, 2019 and returned to Hobart on the 5th of March, 2019. The Kongsberg EM122 multibeam echosounder was used to acquire seafloor bathymetry, backscatter information and watercolumn backscatter between Hobart and Antarctica. The EM122 provides a 1 degree by 1 degree angular resolution. The echosounder's nominal frequency is 12 kHz. Data are stored in .all raw format for bathymetry and backscatter and .wcd format for watercolumn backscatter at CSIRO. There are 965 files totalling 51.9 GB of raw bathymetry/backscatter data and 943 files totalling 106 GB of raw water column data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format are corrected for motion and position. Tide corrections were not applied to the processed data. Processed data had outliers removed. Processed line data are available in *.gsf and ascii format, and processed bathymetry in geotiff format. Additional information regarding this dataset, including information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on the RV Investigator voyage IN2023_V04, International nutrient inter-comparison Voyage (INIV) which departed Hobart on the 05/06/23 and returned to Hobart on the 18/06/23. The Kongsberg EM710 multibeam echosounder was used to acquire seafloor bathymetry and backscatter information and watercolumn backscatter in the Southern Ocean Southwest of Hobart. The EM710 provides a 0.5° by 1° transmit and receive angular resolution respectively. The echosounder's nominal frequency range is from 70 to 100 kHz. Data are stored in .all raw format for bathymetry and backscatter and .wcd format for watercolumn backscatter at CSIRO. There are 110 files totalling 90.3 GB of raw data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format is corrected for motion and position. Tide corrections [were/were not] applied to the processed data. Processed data had outliers removed. Processed line data are available in *.gsf and ascii format, and processed bathymetry and backscatter grids in geotiff format. Additional information regarding this dataset, including further information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2016_V01, 'HEOBI: Heard Earth-Ocean-Biosphere Interactions' which departed Fremantle on the 8th January 2016 and returned to Hobart on the 27th February 2016. The Kongsberg EM710 multibeam echosounder was used to acquire seafloor bathymetry and backscatter information and watercolumn backscatter around Heard and Macdonald islands and between Fremantle and Hobart. The EM710 provides a 0.5° by 1° transmit and receive angular resolution respectively. The echosounder's nominal frequency range is from 70 to 100 kHz. Data are stored in .all raw format for bathymetry and backscatter and in .wcd format for watercolumn backscatter at the CSIRO. There are 923 files totalling 58.3 GB of raw data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format is corrected for motion and position. Tide corrections were not applied to the processed data. Processed data had outliers removed. Processed line data is available in *.gsf and ascii format and processed bathymetry and backscatter grids in geotiff format. Additional information regarding this dataset, including further information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2016_V01, 'HEOBI: Heard Earth-Ocean-Biosphere interactions' which departed Fremantle on the 8th January 2016 and returned to Hobart on the 27th February 2016. The Kongsberg EM122 multibeam echosounder was used to acquire seafloor bathymetry, backscatter information and watercolumn backscatter around Heard and Macdonald islands and between Fremantle and Hobart. The EM122 provides a 1 degree by 1 degree angular resolution. The echosounder's nominal frequency is 12 kHz. Data are stored in .all raw format for bathymetry and backscatter and in .wcd format for watercolumn backscatter at the CSIRO. There are 1006 files totalling 22.8 GB of raw data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format is corrected for motion and position. Tide corrections were not applied to the processed data. Processed data had outliers removed. Processed line data are available in *.gsf and ascii format and processed bathymetry and backscatter grids in geotiff format. Additional information regarding this dataset, including information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2015_c02, Great Australian Bight Research Program: GAB deep-water pelagic and benthic ecosystem study which departed Port Lincoln on the 30 November 2015 and returned to Fremantle on the 22 December 2015. The Kongsberg EM122 multibeam echosounder was used to acquire seafloor bathymetry, backscatter and watercolumn backscatter information around the Great Australian Bight. The EM122 provides a 1 degree by 1 degree angular resolution. The echosounder's nominal frequency is 12 kHz. Data are stored in .all raw format for bathymetry and backscatter and .wcd format for watercolumn backscatter at CSIRO. There are 287 .all files and 13 .wcd files totalling 11.6 GB of raw data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format are corrected for motion and position. Tide corrections were not applied to the processed data. Processed data had outliers removed. Processed line data are available in *.gsf and ascii format, and processed bathymetry and backscatter grids in geotiff format. Additional information regarding this dataset, including information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2024_V01, 'Multidisciplinary Investigations of the Southern Ocean' which departed Hobart on 05/01/2024 and returned to Fremantle on 05/03/2024. The Kongsberg EM710 MKII multibeam echosounder was used to acquire seafloor bathymetry and backscatter information and watercolumn backscatter from Hobart, along the Antarctic ice edge to Fremantle. The EM710 MKII provides a 0.5° by 1° transmit and receive angular resolution respectively. The echosounder's nominal frequency range is from 40 to 100 kHz. Data are stored in .all raw format for bathymetry and backscatter and .wcd format for watercolumn backscatter at CSIRO. There are 135 files totalling 126.9 GB of raw data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in .all format are corrected for motion and position. GPS tide was computed using the EGM2008 model and applied to the processed data. Processed data has had outliers removed. Processed line data are available in .gsf and ascii format, and processed bathymetry grids in geotiff format. Additional information regarding this dataset, including further information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.