This record describes multibeam echosounder data collected on RV Investigator voyage IN2017_V03, 'Sampling the abyss: latitudinal biodiversity patterns along the base of Australia’s eastern continental margin' which departed Bell Bay on the 15 May 2017 and returned to Brisbane on the 16 June 2017. The Kongsberg EM710 MKII multibeam echosounder was used to acquire seafloor bathymetry and backscatter information at sampling sites along the East Coast of Australia, including several Commonwealth Marine Reserves. The EM710 MKII provides a 0.5° by 1° transmit and receive angular resolution respectively. The echosounder's nominal frequency range is from 40 to 100 kHz. Data are stored in *.all raw format for bathymetry and backscatter and at CSIRO. There are 53 files totalling 5.89 GB of raw data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format are corrected for motion and position. Tide corrections were not applied to the processed data. Processed data has had outliers removed. Processed line data are available in *.gsf and ascii format. Additional information regarding this dataset, including further information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2024_V04, 'Linking East Australian Current dynamics and submarine canyon geomorphology to marine ecosystem hotspots' which departed Sydney on the Friday 7th June and returned to Brisbane on the Wednesday 3rd July. The Kongsberg EM122 multibeam echosounder was used to acquire seafloor bathymetry, backscatter information and watercolumn backscatter between Sydney and Brisbane, with primary mapping focused on Richmond and Solitary Canyons. The EM122 provides a 1 degree by 1 degree angular resolution. The echosounder's nominal frequency is 12 kHz. Data are stored in .all raw format for bathymetry and backscatter and .wcd format for watercolumn backscatter at CSIRO. There are 633 files totalling 32 GB of raw data and 633 files totalling 40.3 GB of watercolumn data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in .all format are corrected for motion and position. GPS tide was computed using the EGM2008 model and applied to the processed data. Processed data has had outliers removed. Processed line data are available in .gsf and ascii format, and processed bathymetry grids in geotiff format. Additional information regarding this dataset, including further information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2022_V08, titled "Biodiversity Assessment of Australia’s Indian Ocean Territories", which departed Darwin on September 30 and returned to Fremantle on November 3, 2022. This was a continuation of voyage IN2021_v04. The Kongsberg EM122 multibeam echosounder was used to acquire seafloor bathymetry, backscatter information and watercolumn backscatter between Darwin and Fremantle (via the Indian Ocean Territories). The EM122 provides a 1 degree by 1 degree angular resolution. The echosounder's nominal frequency is 12 kHz. Data are stored in .all raw format for bathymetry and backscatter and .wcd format for watercolumn backscatter at CSIRO. There are 1195 .all files totaling 54 GB of raw bathymetry/backscatter data and 1195 .wcd files totaling 73.7 GB of watercolumn data in this dataset Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format are corrected for motion and position. GPS tide was computed using the EGM2008 model and applied to the processed data. Processed data had outliers removed. Processed line data are available in *.gsf and ascii format, and processed bathymetry and backscatter grids in geotiff format. Additional information regarding this dataset, including information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2021_V04 (Biodiversity Assessment of Australia’s Indian Ocean Territories), which departed Darwin on the 30th June 2021 and returned to Hobart on the 29th July 2021. The Kongsberg EM122 multibeam echosounder was used to acquire seafloor bathymetry, backscatter information and watercolumn backscatter between Scott Reef (Northern Territory) and south west shelf of Tasmania. The EM122 provides a 1 degree by 1 degree angular resolution. The echosounder's nominal frequency is 12 kHz. Data are stored in .all raw format for bathymetry and backscatter and .wcd format for watercolumn backscatter at CSIRO. There are 715 files totalling 43.2 GB of raw bathymetry & backscatter data, and 715 files totalling 60.3 GB of raw watercolumn data in this dataset.. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format are corrected for motion and position. The data have been reduced to approximate Mean Sea Level (MSL) using the Earth Gravitation Model 2008 (EGM2008) 1 arc-minute grid. Tide corrections were not applied to the processed data. Processed data had outliers removed. Processed line data are available in *.gsf and ascii format, and processed bathymetry and backscatter grids in geotiff format. Additional information regarding this dataset, including information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2022_V08, titled "Biodiversity Assessment of Australia’s Indian Ocean Territories" which departed Darwin on September 30 and returned to Fremantle November 3, 2022. This was a continuation of voyage IN2021_v04. The Kongsberg EM710 MKII multibeam echosounder was used to acquire seafloor bathymetry and backscatter information and watercolumn backscatter between Darwin and Fremantle (via the Indian Ocean Territories) in areas with water depths shallower than ~1000m. The EM710 MKII provides a 0.5° by 1° transmit and receive angular resolution respectively. The echosounder's nominal frequency range is from 40 to 100 kHz. During this voyage, the frequency range was set to 70 to 100 kHz. Data are stored in .all raw format for bathymetry and backscatter and .wcd format for watercolumn backscatter at CSIRO. There are 138 .all files totaling 32.6 GB of raw bathymetry/backscatter data and 135 .wcd files totaling 233 GB of watercolumn data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format are corrected for motion and position. GPS tide was computed using the EGM2008 model and applied to the processed data. Processed data has had outliers removed. Processed line data are available in *.gsf and ascii format, and processed bathymetry grids in geotiff format. Additional information regarding this dataset, including further information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2015_c02, Great Australian Bight Research Program: GAB deep-water pelagic and benthic ecosystem study which departed Port Lincoln on the 30 November 2015 and returned to Fremantle on the 22 December 2015. The Kongsberg EM122 multibeam echosounder was used to acquire seafloor bathymetry, backscatter and watercolumn backscatter information around the Great Australian Bight. The EM122 provides a 1 degree by 1 degree angular resolution. The echosounder's nominal frequency is 12 kHz. Data are stored in .all raw format for bathymetry and backscatter and .wcd format for watercolumn backscatter at CSIRO. There are 287 .all files and 13 .wcd files totalling 11.6 GB of raw data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format are corrected for motion and position. Tide corrections were not applied to the processed data. Processed data had outliers removed. Processed line data are available in *.gsf and ascii format, and processed bathymetry and backscatter grids in geotiff format. Additional information regarding this dataset, including information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2024_V04, 'Linking East Australian Current dynamics and submarine canyon geomorphology to marine ecosystem hotspots' which departed Sydney on the Friday 7th and returned to Brisbane on the on the Wednesday 3rd July. The Kongsberg EM710 MKII multibeam echosounder was used to acquire seafloor bathymetry and backscatter information and watercolumn backscatter between Sydney and Brisbane, with primary mapping focused on Richmond and Solitary Canyons. The EM710 MKII provides a 0.5° by 1° transmit and receive angular resolution respectively. The echosounder's nominal frequency range is from 40 to 100 kHz. Data are stored in .all raw format for bathymetry and backscatter and .wcd format for watercolumn backscatter at CSIRO. There are 250 files totalling 37.8 GB of raw data and 250 files totalling 284 GB of watercolumn data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in .all format are corrected for motion and position. GPS tide was computed using the EGM2008 model and applied to the processed data. Processed data has had outliers removed. Processed line data are available in .gsf and ascii format, and processed bathymetry grids in geotiff format. Additional information regarding this dataset, including further information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2015_V02, which departed Sydney on 15 May 2015 and arrived in Brisbane on 26 May 2015. The Kongsberg EM122 multibeam echosounder was used to acquire seafloor bathymetry and backscatter information off Fraser Island out to the abyssal plain, surveying for suitable mooring locations. Ping rate varied according to depth. Data are stored in *.all raw format at CSIRO Oceans and Atmosphere. There are 167 files totalling 4.66 GB of raw data in this dataset. Processed data are available in XYZ and GSF format. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2021_V04 (Biodiversity Assessment of Australia’s Indian Ocean Territories), which departed Darwin on the 30th June 2021 and returned to Hobart on the 29th July 2021. The Kongsberg EM710 MKII multibeam echosounder was used to acquire seafloor bathymetry and backscatter information and watercolumn backscatter between Darwin and Scott Reef (Northern Territory), south west shelf of Western Australia and on the south west shelf of Tasmania. The EM710 MKII provides a 0.5° by 1° transmit and receive angular resolution respectively. The echosounder's nominal frequency range is from 40 to 100 kHz. Data are stored in .all raw format for bathymetry and backscatter and .wcd format for watercolumn backscatter at CSIRO. There are 94 files totalling 22.6 GB of raw bathymetry and backscatter data, and 94 files totalling 166 GB of raw watercolumn data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format are corrected for motion and position. The data have been reduced to approximate Mean Sea Level (MSL) using the Earth Gravitation Model 2008 (EGM2008) 1 arc-minute grid. Tide corrections were not applied to the processed data. Processed data has had outliers removed. Processed line data are available in *.gsf and ascii format, and processed bathymetry and backscatter grids in geotiff format. Additional information regarding this dataset, including further information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2018_T01, titled: "Physical and biogeochemical gradients in the East Australian Current." The voyage took place from Hobart (TAS) to Brisbane (QLD) between April 5 and April 14, 2018. The Kongsberg EM122 multibeam echosounder was used to acquire seafloor bathymetry, backscatter information between Brisbane coastline towards Hobart. The EM122 provides a 1 degree by 1 degree angular resolution. The echosounder's nominal frequency is 12 kHz. Data are stored in *.all raw format for bathymetry and backscatter at CSIRO. There are 184 files totalling 6.08 GB of raw data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format are corrected for motion and position. Tide corrections were not applied to the processed data. Processed data had outliers removed. Processed line data are available in *.gsf and ascii format, and processed bathymetry and backscatter grids in geotiff format. Additional information regarding this dataset, including information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.