This record describes ME 70 scientific multibeam fisheries echosounder data collected on RV Investigator voyage IN2020_V06, titled "Probing the Australian-Pacific Plate Boundary: Macquarie Ridge in 3-D." The voyage took place between October 8 and November 3, 2020 departing from Hobart (TAS) and arriving in Hobart (TAS). The Simrad ME70 scientific multibeam echosounder acquired acoustic data with an effective range nominally at ~500 m, and since much of the mapping area was deeper than this, the ME70 was only run intermittently and mainly for testing purposes. The echosounder's frequency range is from 70 kHz to 120 kHz. Data are stored in Simrad *.all raw format at CSIRO. There are 65 files totalling 19.9 GB of raw data in this dataset. No processing has been conducted on this data. Additional information regarding this dataset, including the settings used, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2017_T02, 'Collaborative Australian Postgraduate Sea Training Alliance Network (CAPSTAN): Training the Next Generation of Marine Scientists'. The voyage took place between November 14 and November 26, 2017 departing from Fremantle (WA) and arriving in Hobart (TAS). The Kongsberg EM710 multibeam echosounder was used to acquire seafloor bathymetry and backscatter information. A total of 1,711 km was covered, primarily used for mapping the continental shelf and the top of the canyons within the sampling area in addition to being the primary sounder in shallow water. The EM710 provides a 0.5° by 1° transmit and receive angular resolution respectively. The echosounder's nominal frequency range is from 70 to 100 kHz. Data are stored in *.all raw format for bathymetry and backscatter at CSIRO. There are 164 files totalling 24.9 GB of raw data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format is corrected for motion and position. Tide corrections were not applied to the processed data. Processed data had outliers removed. Processed line data are available in *.gsf and ascii format. Additional information regarding this dataset, including further information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes ME 70 scientific multibeam fisheries echosounder data collected on RV Investigator voyage IN2018_E02, titled 'MNF Trials and Calibrations' which departed Hobart on the 3rd of September 2018 and returned to Hobart on the 9th of September 2018. The Simrad ME70 scientific multibeam echosounder acquired acoustic backscatter data through the water column as part of a series of trials and calibration testing. Data are stored in Simrad *.all raw format at CSIRO. There are 27 files totalling 2.3 GB of raw data in this dataset. No processing has been conducted on this data. Additional information regarding this dataset, including the settings used, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes ME 70 scientific multibeam fisheries echosounder data collected on RV Investigator voyage IN2017_E03, Equipment Commissioning Sea Trials, which departed Brisbane on the 20th August 2017 and returned to Brisbane on the 24th of August 2017. The Simrad ME70 scientific multibeam echosounder acquired acoustic backscatter data through the water column using a variety of configurations for testing purposes. The echosounder's frequency range is from 70 kHz to 120 kHz. The ME70 logged sporadically for the extent of the voyage. Data are stored in Simrad *.raw format at CSIRO. There are 22 files totaling 1.56 GB of raw data in this dataset. No processing has been conducted on this data. Additional information regarding this dataset, including the settings used, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes ME 70 scientific multibeam fisheries echosounder data collected from the Marine National Facility (MNF) RV Investigator Voyage IN2020_V08, titled "SOLACE - Southern Ocean Large Areal Carbon Export: quantifying carbon sequestration in subpolar and polar waters." The voyage took place between December 5, 2020 and January 16, 2021 departing from Hobart (TAS) and arriving in Hobart (TAS). The Simrad ME70 scientific multibeam echosounder acquired acoustic backscatter data through the water column to 200m. The echosounder's frequency range is from 70 kHz to 120 kHz. The ME70 logged sporadically for the extent of the voyage. Data is stored in Simrad *.raw format at CSIRO. There are 273 files totalling 41.2 GB of raw data in this dataset. No processing has been conducted on this data. Additional information regarding this dataset, including the settings used, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes ME 70 scientific multibeam fisheries echosounder data collected on RV Investigator voyage IN2017_V04, 'The whole enchilada: from production to predation in Tasman Sea ecosystems' which departed Brisbane on the 31-Aug-2017 and returned to Sydney on the 18 September 2017. The Simrad ME70 scientific multibeam echosounder acquired acoustic backscatter data through the water column. The echosounder's frequency range is from 70 kHz to 120 kHz. The ME70 logged sporadically for most of the voyage, but logged continuously near Montague Island. Data are stored in Simrad *.all raw format at CSIRO. There are 173 files totalling 15 GB of raw data in this dataset. No processing has been conducted on this data. Additional information regarding this dataset, including the settings used, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes ME 70 scientific multibeam fisheries echosounder data collected on RV Investigator voyage IN2014_E01. The RV Investigator travelled from Singapore to Hobart on her maiden voyage, departing Singapore on the 24th of August 2014 and arriving in Hobart on the 9th of October 2014. The primary purpose of the voyage, aside from transit, was familiarisation of the equipment and to test and configure the geophysical and acoustic systems. Further objectives were testing the K-Sync utility and developing synchronisation groups for different depths and performing noise tests on the biological acoustics (ME70, EK60).

This record describes multibeam echosounder data collected on RV Investigator voyage IN2017_V02, 'SOTS: Southern Ocean Time Series automated moorings for climate and carbon cycle studies southwest of Tasmania' which departed Hobart on the 17 March 2017 and returned to Hobart on the 28 March 2017. The Kongsberg EM710 MKII multibeam echosounder was used to acquire seafloor bathymetry and backscatter information in the Southern Ocean. The EM710 MKII provides a 0.5° by 1° transmit and receive angular resolution respectively. The echosounder's nominal frequency range is from 40 to 100 kHz. Data are stored in .all raw format for bathymetry and backscatter and .wcd format for watercolumn backscatter at CSIRO. There are 20 files totalling 5 GB of raw data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format are corrected for motion and position. Tide corrections were applied to the processed data. Processed data has had outliers removed. Processed line data are available in *.gsf and ascii format, and processed bathymetry and backscatter grids in geotiff format. Additional information regarding this dataset, including further information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on the Marine National Facility (MNF) RV Investigator voyage IN2024_V02, titled "SOTS: Southern Ocean Time Series automated moorings for climate and carbon cycle studies southwest of Tasmania." The voyage took place between March 31, 2024 and April 19, 2024 (AEST), departing from Hobart and returning to Hobart. The Kongsberg EM122 multibeam echosounder was used to acquire seafloor bathymetry, backscatter information and watercolumn backscatter between Hobart and the SOTS moorings site. The EM122 provides a 1 degree by 1 degree angular resolution. The echosounder's nominal frequency is 12 kHz. Data are stored in .all raw format for bathymetry and backscatter and .wcd format for watercolumn backscatter at CSIRO. There are 477 files totalling 25.6GB of raw bathymetry and 477 files totalling 27.8GB of water column data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in .all format are corrected for motion and position. GPS tide was computed using the EGM2008 model and applied to the processed data. Processed data has had outliers removed. Processed line data are available in .gsf and ascii format, and processed bathymetry grids in geotiff format. Additional information regarding this dataset, including further information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2021_V02 (SOTS: Southern Ocean Time Series automated moorings for climate and carbon cycle studies southwest of Tasmania), which departed Hobart on the 14th April 2021 and returned to Hobart on the 28th April 2021. The Kongsberg EM710 MKII multibeam echosounder was used to acquire seafloor bathymetry and backscatter information and watercolumn backscatter in water depths less than 1000 m during the voyage (i.e. on the Continental shelf and upper slope region). The EM710 MKII provides a 0.5° by 1° transmit and receive angular resolution respectively. The echosounder's nominal frequency range is from 40 to 100 kHz. Data are stored in .all raw format for bathymetry and backscatter and .wcd format for watercolumn backscatter at CSIRO. There are 27 files totalling 4.99 GB of raw bathymetry & backscatter data, and 26 files totalling 51.5 GB of raw watercolumn data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format are corrected for motion and position. The data have been reduced to approximate Mean Sea Level (MSL) using the Earth Gravitation Model 2008 (EGM2008) 1 arc-minute grid. Tide corrections were not applied to the processed data. Processed data had outliers removed. Processed line data are available in *.gsf and ascii format, and processed bathymetry and backscatter grids in geotiff format. Additional information regarding this dataset, including further information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.