This record describes gravity data collected on RV Investigator voyage IN2023_V02, titled "Gigantic submarine landslide offshore western Tasmania: risk mitigation for shelf derived tsunami in Australia", which departed Hobart on March 24 and returned to Hobart on April 30, 2023. The gravity meter instrument is a MicroG Lacoste Air-Sea II. Data are stored in .ENV and .DAT data files at CSIRO. There are 24 files totalling 348 MB of raw data in this dataset. Note: The gravity meter (ASII) was operated until the 13/04/2023 (UTC) when it started to develop periods of erratic movement and displaying large differences between the Spring Tension (ST) and Gravity (Grav) values. A suspected gyro fault rendered the system offline for the remainder of the voyage. A start of voyage wharf tie was undertaken in Hobart on 23-03-2023 (UTC) using a Scintrex Autograv CG-5. Wharf tie data can be found in "Hobart_wharf_tie_2022_03_23.TXT", which is stored with the raw data. Due to the aforementioned issue with the gravity meter, no end of voyage gravity wharf tie was undertaken. No processing has been conducted on this data. Additional information regarding this dataset is contained in the GSM data acquisition and processing report.

This record describes gravity data collected on RV Investigator voyage IN2021_V03, titled "Integrated Marine Observing System: monitoring of East Australian Current property transports at 27 degrees South (multi-year)." The voyage took place from Hobart (TAS) to Brisbane (QLD) between May 8 and June 3, 2021. The gravity meter instrument is a MicroG Lacoste Air-Sea II. Data are stored in .ENV and .DAT data files at CSIRO. There are 62 files totalling 462 MB of raw data in this dataset. No processing has been conducted on this data. Additional information regarding this dataset is contained in the GSM data acquisition and processing report.

This record describes gravity data collected on RV Investigator voyage IN2022_V03, "SOTS: Southern Ocean Time Series automated moorings for climate and carbon cycle studies southwest of Tasmania", which departed Hobart on the 4th May 2022 and returned to Hobart on the 15th May 2022 (AEST). The gravity meter instrument is a MicroG Lacoste Air-Sea II. Data are stored in .ENV and .DAT data files at CSIRO. The gravity meter was running for the duration of the voyage. There are 12 files totaling 184 MB of raw data in this dataset. A wharf tie was undertaken after the previous voyage (19 April 2022) and again after this voyage (15 May 2022) at the Hobart wharf using a Scintrex Autograv CG-5. Wharf tie data can be found in the "wharf_calibrations" folder which is stored with the raw data. An Excel spreadsheet detailing the wharf tie metadata and associated waterline measurements is also stored with the raw data. Additional information regarding this dataset is contained in the GSM data acquisition and processing report.

This record describes gravity data collected on RV Investigator voyage IN2021_V02 (SOTS: Southern Ocean Time Series automated moorings for climate and carbon cycle studies southwest of Tasmania), which departed Hobart on the 14th April 2021 and returned to Hobart on the 28th April 2021. The gravity meter instrument is a MicroG Lacoste Air-Sea II. Data are stored in .ENV and .DAT data files at CSIRO. There are 12 files totalling 178 MB of raw data in this dataset. A wharf tie was not undertaken prior to this voyage. No data was acquired between 01:20 on 21/04/2021 and 01:28 on 24/04/2021 (UTC), due to rough weather conditions requiring the system to be turned off. No processing has been conducted on this data. Additional information regarding this dataset is contained in the GSM data acquisition and processing report.

This record describes gravity data collected on RV Investigator voyage IN2022_V06, titled "Integrated Marine Observing System: monitoring of East Australian Current property transports at 27 degrees South." The voyage took place between July 14 and July 30, 2022 (AEST), departing from Brisbane and returning to Brisbane. The gravity meter instrument is a MicroG Lacoste Air-Sea II. Data are stored in .ENV and .DAT data files at CSIRO. There are 34 files totalling 281 MB of raw data in this dataset. We were unable to conduct a wharf tie as the ship was only temporarily in port to drop science party off. A waterline measurement alongside the Brisbane International Cruise Terminal (BICT) was conducted. No processing has been conducted on this data. Additional information regarding this dataset is contained in the GSM data acquisition and processing report.

This record describes gravity data collected on RV Investigator voyage IN2018_T01, titled: "Physical and biogeochemical gradients in the East Australian Current." The voyage took place from Hobart (TAS) to Brisbane (QLD) between April 5 and April 14, 2018. The gravity meter instrument is a MicroG Lacoste Air-Sea II. Data are stored in .ENV and .DAT data files at CSIRO. There are 20 files totalling 165 MB of raw data in this dataset. No processing has been conducted on this data. Additional information regarding this dataset is contained in the GSM data acquisition and processing report.

This record describes gravity data collected on RV Investigator voyage IN2022_V02, titled "Sedimentation at its extreme: how powerful are submarine caldera-forming eruptions (Kermadec arc)?" The voyage took place between March 15, 2022 and April 19, 2022 (AEST), departing from Hobart and returning to Hobart. The gravity meter instrument is a MicroG Lacoste Air-Sea II. Data are stored in .ENV and .DAT data files at CSIRO. The gravity meter was running for the duration of the voyage except for the period between 26-03-2022 05:00 and 29-03-2022 11:05 UTC when no data was acquired from any ship system as mandated and for a period of bad weather from 2022-04-12 18:01:50 until 2022-04-14 00:32:46 UTC. There are 70 files totaling 540 MB of raw data in this dataset. Wharf ties were undertaken prior to (13 March 2022) and after the voyage (19 April 2022) at the Hobart wharf using a Scintrex Autograv CG-5. Wharf tie data can be found in Hobart wharf_tie_2022_03_13.txt and Hobart wharf_tie_2022_04_19.txt, which is stored with the raw data. An Excel spreadsheet detailing the wharf tie metadata and associated waterline measurements is also stored with the raw data. Additional information regarding this dataset is contained in the GSM data acquisition and processing report.

This record describes gravity data collected on RV Investigator voyage IN2020_V06, titled "Probing the Australian-Pacific Plate Boundary: Macquarie Ridge in 3-D." The voyage took place between October 8 and November 1, 2020 departing from Hobart (TAS) and arriving in Hobart (TAS). The gravity meter instrument is a MicroG Lacoste Air-Sea II. Data are stored in .ENV and .DAT data files at CSIRO. There are 26 files totalling 425 MB of raw data in this dataset. Wharf tie[s] were undertaken at Hobart Princes Wharf No.4 location using a Scintrex Autograv CG-5. Wharf tie data can be found in "Hobart wharf_tie_2020_11_02.TXT", which is stored with the raw data. No processing has been conducted on this data. Additional information regarding this dataset is contained in the GSM data acquisition and processing report.

This record describes gravity data collected on RV Investigator voyage IN2019_V05, titled: "Integrated Marine Observing System: monitoring of East Australian Current property transports at 27 degrees South." The voyage took place between September 9 and September 29, 2019 departing from Brisbane (QLD) and arriving in Brisbane. The gravity meter instrument is a MicroG Lacoste Air-Sea II. Data are stored in .ENV and .DAT data files at CSIRO. There are 44 files totalling 370 MB of raw data in this dataset. No processing has been conducted on this data. Additional information regarding this dataset is contained in the GSM data acquisition and processing report.

This record describes gravity data collected on RV Investigator voyage IN2019_T02, titled: "Deep seascapes of the Great Barrier Reef: Uncovering submarine canyons and landslides." The voyage took place between October 4 and October 14, 2019 departing from Brisbane (QLD) and arriving in Darwin (NT). The gravity meter instrument is a MicroG Lacoste Air-Sea II. Data are stored in .ENV and .DAT data files at CSIRO. There are 26 files totalling 199 MB of raw data in this dataset. No processing has been conducted on this data. Additional information regarding this dataset is contained in the GSM data acquisition and processing report.