RV Investigator Voyage IN2019 V06 XBT Data
공공데이터포털
This record describes XBT data collected on RV Investigator voyage IN2019_V06, titled 'Tropical observations of atmospheric convection, biogenic emissions, ocean mixing, and processes generating intra-seasonal SST variability' which departed Darwin on the 19th of October 2019 and returned to Darwin on the 17th of December 2019 ,consisting of two legs. Leg 1 - Darwin, 20:00, 19 October 2019 to Darwin, 19:00, 10 November 2019 Leg 2 - Darwin, 20:00, 11 November 2019 to Darwin, 08:00, 17 December 2019 A total of 33 XBT casts were conducted over the duration of this voyage (27 XBTs in Leg1, 6 XBTs in Leg 2). Data are stored in netCDF files at CSIRO. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request.
RV Investigator Voyage IN2021 V04 CTD Data
공공데이터포털
This record describes the Conductivity-Temperature-Depth (CTD) data collected from the Marine National Facility RV Investigator voyage IN2021_V04, titled: "Biodiversity Assessment of Australia’s Indian Ocean Territories." The voyage took place between June 30 and July 29, 2021 departing from Darwin (NT) and arriving in Hobart (TAS). Data for 25 deployments were acquired using the Sea-Bird SBE911 CTD 24, fitted with 31 twelve litre bottles on the rosette sampler. Sea-Bird-supplied calibration factors were used to compute the pressures and preliminary conductivity values. CSIRO -supplied calibrations were applied to the temperature data. The data were subjected to automated QC to remove spikes and out-of-range values. The final conductivity calibration was based on a single deployment grouping. The final calibration from the primary sensor had a standard deviation (SD) of 0.0013062 PSU, within our target of ‘better than 0.002 PSU’. The standard product of 1 decibar binned averaged were produced using data from the primary sensors. The dissolved oxygen data calibration fit had a SD of 0.089089μM. The agreement between the CTD and bottle data was good. There was an observed spike in values indicating a blockage in the secondary sensors of CTD deployment 11 around 2700 decibar and it is recommended to use the primary sensor data. An Altimeter, Nephelometer, Transmissometer, CDOM, Fluorometer, and Turbidity meter were also installed on the auxiliary A/D channels of the CTD. The Seapoint nephelometer values were found to be out of the expected range for the sensor. The collected data were subsequently processed and archived within the CSIRO National Collections and Marine Infrastructure (NCMI) Information and Data Centre (IDC) in Hobart. Additional information regarding this dataset may be contained in the Voyage Summary and the CTD Data Processing Report.
RV Investigator Voyage IN2020 V06 XBT Data
공공데이터포털
This record describes XBT data collected on RV Investigator voyage IN2020_V06 titled "Probing the Australian-Pacific Plate Boundary: Macquarie Ridge in 3-D." The voyage took place between October 8 and November 3, 2020 departing from Hobart (TAS) and arriving in Hobart (TAS). A total of 23 XBT casts were conducted over the duration of this voyage. Of these casts, 14 were considered acceptable, 4 were bad (failed or high SST) (i.e. 014, 015, 016, 019), 4 were good to only ~200 m (i.e. 003, 004, 005, 006) and 1 had no data at the start of the profile (i.e. 017). Data are stored in netCDF files at CSIRO. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request.