This record describes XBT data collected on RV Investigator voyage IN2022_V03, "SOTS: Southern Ocean Time Series automated moorings for climate and carbon cycle studies southwest of Tasmania", which departed Hobart on the 4th May 2022 and returned to Hobart on the 15th May 2022 (AEST). A total of 1 XBT casts were conducted over the duration of this voyage. Data are stored in netCDF files at CSIRO. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes XBT data collected on the Marine National Facility (MNF) RV Investigator voyage IN2024_V02, titled "SOTS: Southern Ocean Time Series automated moorings for climate and carbon cycle studies southwest of Tasmania." The voyage took place between March 31, 2024 and April 19, 2024 (AEST), departing from Hobart and returning to Hobart. A total of 3 XBT casts were conducted over the duration of this voyage. Two casts were successful, and one cast failed due to a bad connection and did not record after deployment. Data are stored in netCDF files at CSIRO. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes XBT data collected on RV Investigator voyage IN2021_V02 (SOTS: Southern Ocean Time Series automated moorings for climate and carbon cycle studies southwest of Tasmania), which departed Hobart on the 14th April 2021 and returned to Hobart on the 28th April 2021. A total of 9 XBT casts were conducted over the duration of this voyage; 2 of which were discounted, one for testing (xbt_001) and one was a bad cast (xbt_004). Data are stored in netCDF files at CSIRO. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes XBT data collectedfrom the Marine National Facility (MNF) RV Investigator Voyage IN2020_V08, titled "SOLACE - Southern Ocean Large Areal Carbon Export: quantifying carbon sequestration in subpolar and polar waters." The voyage took place between December 5, 2020 and January 16, 2021 departing from Hobart (TAS) and arriving in Hobart (TAS). A total of 30 XBT casts were conducted over the duration of this voyage. Data are stored in netCDF files at CSIRO. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes XBT data collected on RV Investigator voyage IN2024_V01, 'Multidisciplinary Investigations of the Southern Ocean' which departed Hobart on 05/01/2024 and returned to Fremantle on 05/03/2024. A total of 109 XBT casts were conducted over the duration of this voyage. Data are stored in netCDF files at CSIRO. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes XBT data collected on RV Investigator voyage IN2022_V06, titled "Integrated Marine Observing System: monitoring of East Australian Current property transports at 27 degrees South." The voyage took place between July 14 and July 30, 2022 (AEST), departing from Brisbane and returning to Brisbane. A total of 17 XBT casts were conducted over the duration of this voyage. Data are stored in netCDF files at CSIRO. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes the Conductivity-Temperature-Depth (CTD) data collected from the Marine National Facility RV Investigator voyage IN2022_V03 titled: "SOTS: Southern Ocean Time Series automated moorings for climate and carbon cycle studies southwest of Tasmania". The voyage took place between May 4 and May 15, 2022 departing from Hobart (TAS) and returning to Hobart (TAS) Data for 8 deployments were acquired using the Sea-Bird SBE911 CTD 24, fitted with 36 twelve litre bottles on the rosette sampler. Sea-Bird-supplied calibration factors were used to compute the pressures and preliminary conductivity values. CSIRO -supplied calibrations were applied to the temperature data. The data were subjected to automated QC to remove spikes and out-of-range values. The final conductivity calibration was based on a single deployment grouping. The final calibration from the secondary sensor had a standard deviation (SD) of 0.0013055 PSU, well within our target of ‘better than 0.002 PSU’. The standard product of 1 decibar binned averaged were produced using data from the secondary sensors. The dissolved oxygen data calibration fit had a SD of 0.65937μM. The agreement between the CTD and bottle data was good. An Altimeter, PAR, Transmissometer, Fluorometer, and Turbidity were also installed on the auxiliary A/D channels of the CTD. A secondary Altimeter was added from cast 2 onwards. The collected data were subsequently processed (quality-controlled), and archived by the CSIRO National Collections and Marine Infrastructure (NCMI) Information and Data Centre (IDC). Additional information regarding this dataset may be contained in the Voyage Summary and the CTD Data Processing Report.

This record describes the CTD data collected on Investigator voyage IN2024_V02, titled: "SOTS: Southern Ocean Time Series automated moorings for climate and carbon cycle studies southwest of Tasmania." The voyage took place between March 31, 2024 and April 19, 2024 (AEST), departing from Hobart and returning to Hobart. Data for 9 CTD deployments were acquired using the Sea-Bird SBE9+V2 CTD unit #24 (S/N 1354), fitted with 36 twelve-litre bottles on the rosette sampler. Sea-Bird-supplied calibration factors were used to compute the pressures and preliminary conductivity values. CSIRO-supplied calibrations were applied to the temperature data. The data were subjected to automated QC to remove spikes and out-of-range values. The final conductivity calibration was based on a single deployment grouping. The final calibration from the primary sensor had a standard deviation (SD) of 0.0014625 PSU (casts #1-9), within our target of ‘better than 0.002 PSU’. The standard product of 1-decibar binned averages were produced using data from the primary sensors. The dissolved oxygen data (secondary) calibration fit had a SD of 0.78151 μM (casts #2-6,8,9). The agreement between the CTD and bottle data was good. Additional sensors include: Altimeter (Tritech PA500), Transmissometer (Wetlabs C-Star ), CDOM, Chlorophyll-a, Scattering (Wetlabs ECO FLCDRTD) were installed on the auxiliary A/D channels of the CTD. The collected data were processed (quality-controlled), and subsequently archived by the CSIRO National Collections and Marine Infrastructure (NCMI) Information and Data Centre (IDC). Additional information regarding this dataset may be contained in the Voyage Summary and the Data Processing Report.

This record describes XBT data collected on RV Investigator voyage on IN2025_V07, 'SOFS recovery voyage' which departed Hobart on the 1/7/2025 and returned to Hobart on the 6/7/2025. A total of 1 XBT cast was conducted over the duration of this voyage. Data are stored in netCDF files at CSIRO. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes the Conductivity-Temperature-Depth (CTD) data collected from the Marine National Facility RV Investigator voyage IN2021_V02, titled: "SOTS: Southern Ocean Time Series automated moorings for climate and carbon cycle studies southwest of Tasmania." The voyage took place between April 14 and April 28, 2021 departing from Hobart (TAS) and arriving in Hobart. Data for 6 deployments were acquired using the Sea-Bird SBE911 CTD 24, fitted with 36 twelve litre bottles on the rosette sampler. Sea-Bird-supplied calibration factors were used to compute the pressures and preliminary conductivity values. CSIRO -supplied calibrations were applied to the temperature data. The data were subjected to automated QC to remove spikes and out-of-range values. The final conductivity calibration was based on a single deployment grouping. The final calibration from the primary sensor had a standard deviation (SD) of 0. 0015434PSU, within our target of ‘better than 0.002 PSU’. The standard product of 1 decibar binned averaged were produced using data from the primary sensors. The dissolved oxygen data calibration fit had a SD of 0.90687 μM. The agreement between the CTD and bottle data was good. Transmissometer, Wetlabs FLBBRTD and Altimeter were also installed on the auxiliary A/D channels of the CTD. The collected data were subsequently processed and archived within the CSIRO National Collections and Marine Infrastructure (NCMI) Information and Data Centre (IDC) in Hobart. Additional information regarding this dataset may be contained in the Voyage Summary and the CTD Data Processing Report.