Maps showing quarterly means of wind stress on Australia's oceans from data supplied by the National Centers for Environmental Prediction (NCEP) Re-analysis Project, 1976 to 1998 inclusive. This map has been produced by CSIRO for the National Oceans Office, as part of an ongoing commitment to natural resource planning and management through the 'National Marine Bioregionalisation' project.

Gridded near-surface (2 and 10 m) daily average wind datasets for Australia from 1975 to 2018 have been constructed by interpolating observational data collected by the Australian Bureau of Meteorology (BoM). The new datasets span Australia at 0.05 × 0.05° resolution with a daily time step. The datasets were constructed by blending observational data collected at various heights using local surface roughness information.

NOAA CoastWatch distributes science quality wind stress data in zonal, meridional, modulus, and wind stress curl sets. This data begins with wind velocity measurements from the ASCAT instruments onboard all EUMETSAT's MetOp satellites. ASCAT is a microwave scatterometer designed to measure surface winds over the global ocean. NOAA CoastWatch processes wind velocity to wind stress and wind stress curl. (This is a monthly composite.)

수치표고모델(DEM)에서 추출한 지형의 바람 노출(Wind Exposition) 분석도이며, 지형의 바람 노출은 1 미만의 값은 바람 그림자 영역을 나타내고 1 이상의 값은 바람에 노출된 영역을 나타내는 각도 단계를 사용하여 모든 방향에 대한 평균 '바람 영향 지수'를 계산한다. 파일 형태는 ascii, grid, geotiff이다.- 데이터 사용법 -* 본 데이터를 사용하려면 상용프로그램인 ArcGIS S/W나 오픈 소프트웨어인 QGIS 프로그램( https://qgis.org/en/site/forusers/download.html에서 다운)을 사용하면 됩니다.* asc파일은 각 셀의 값을 나타내는 텍스트 파일로 텍스트 에디터나 엑셀에서 불러올 수 있습니다.* 전문적 프로그램 활용이 어려운 일반 사용자들을 위해 이미지파일을 제공합니다.- 데이터 확장자 설명 -geotiff : 지리 참조 정보가 포함되어 있는 이미지 파일형식의 데이터 입니다. (.tiff)grid: 각 격자에 고유한 값이 저장되어있는 Esri사 고유의 래스터 파일형식의 데이터입니다. (.grid)ASCII: 래스터의 속성을 정의하는 헤더 정보와 공백으로 구분 된 각 셀의 값으로 래스터를표현하는 텍스트 파일이며, 프로그램간 자료 호환을 위해 만들어진 파일입니다. (.asc) 지형, 지질 등 지표면 및 지하 현황 파악 및 분석을 위한 기초 데이터산사태, 홍수, 지진 등 자연재해 분석을 위한 기초 데이터지하수, 광물자원, 골재 등 지하자원 개발을 위한 기초 데이터도시 및 토지 개발, 도로, 철도 적지 선정 등을 위한 기초 데이터지형 및 지질과 관련된 인공지능 비즈니스 적용을 위한 기본 데이터로 활용엔지니어링 업체, 대학 및 연구기관의 실무 및 교육/연구용

These wind statistics data are collected continuously at the Tasmanian Earth Resources Satellite Station (TERSS) facility on Droughty Hill near Hobart on Tasmania's south east coast. Data collection began in September 1995 and continued to Dec 2011. Instrument Details: Location: latitude -42.9256, longitude 147.4206, ground elevation 150m, instrument 7 metres above ground. Manufacturer: R.M. Young Company. Traverse City, Michigan 49686 U.S.A. 616-946-3980 (http://www.youngusa.com) Model: Wind Monitor, model 05103V (See link to brochure). Data: Each line of data gives values reduced from samples collected every second over the preceding 10 minutes. Parameters include: Date; Time (UTC); Mean wind speed; Minimum wind speed; Maximum wind speed; Mean direction; Standard deviation of the previous 10 1-minute direction averages; Vector averaged wind speed; Vector averaged wind direction; Vector averaged "stress" in (m/s)**2; Vector averaged stress direction. The code that takes the one second readings and produces the 10 minute averages in the data files is available via the documentation links section). NOTE: This data is collected in order to assist in the daily management of the satellite dish. The instrument is located at a site to suit this particular purpose, not at a location that would provide the best statistics for other purposes.

NOAA CoastWatch distributes science quality wind stress data in zonal, meridional, modulus, and wind stress curl sets. This data begins with wind velocity measurements from the ASCAT instrument onboard EUMETSAT's Metop-B satellite. ASCAT is a microwave scatterometer designed to measure surface winds over the global ocean. NOAA CoastWatch processes wind velocity to wind stress and wind stress curl. (This is a monthly composite.)

Contains monthly averaged ocean surface wind stress derived from Seasat-A Scatterometer (SASS) wind retrievals, from July 1978 until October 1978, gridded on a 2.5-degree by 2.5 degree global grid. The vector average wind stress is stored in units of dynes per centimeter squared (dyn/cm^2). Data is provided in formatted ASCII text. The primary data set used to construct these wind stress fields consists of 96 days of SASS vector winds supplied by Robert Atlas at GSFC. The directional ambiguities in the raw SASS data had been objectively removed using the GSFC Laboratory for Atmospheric Sciences atmospheric general circulation model.