##Get data on fire response plan area boundaries and recommended response types for wildfires. This dataset shows the boundaries of fire response plan areas and provides the recommended response type that corresponds to the official fire response plan for each area. Fire response types include: * full response * modified response * monitored response * prescribed fire The [Forest Fire Info Map](https://www.lioapplications.lrc.gov.on.ca/ForestFireInformationMap/index.html?viewer=FFIM.FFIM) shows active fires, current fire danger and restricted fire zones in place due to high fire danger.

Fire perimeters for this year's forest fires in Ontario. Fire perimeters are illustrations only and may not be exact in relation to actual physical locations. The Ontario Ministry of Natural Resources does not capture perimeters for every fire. Fire perimeters are not captured in real time; each capture depends on available resources and weather conditions and may be several days old. During fire season, perimeter data is updated every 24 hours as improved information becomes available; therefore, reported fire size may fluctuate from day to day. The Ontario Ministry of Natural Resources shall not be liable in any way for the use of, or reliance upon this information. The [Forest Fire Info Map](https://www.lioapplications.lrc.gov.on.ca/ForestFireInformationMap/index.html?viewer=FFIM.FFIM&locale=en-CA) shows active fires, current fire danger and restricted fire zones in place due to high fire danger.

This dataset shows the boundaries of the province's six fire management zones that existed prior to 2014 in which most forest fires received the same type of response. These management zones were based on: * common forest and forest fire management objectives * land use * density of values at risk * fire load * forest ecology The 2014 Wildland Fire Management Strategy moved from a zone-based approach to one where each wildland fire is assessed and receives an appropriate response according to the circumstances and condition of the fire.

The Saskatchewan Forest Fire Control Centre (SFFCC) provided surface meteorological data to BOREAS from their archive. This data set contains hourly surface meteorological data from 18 of the meteorological stations located across Saskatchewan. Included in this data are parameters of date, time, temperature, relative humidity, wind direction, wind speed and precipitation. Temporally, the data cover the period of May through September of 1994 and 1995.

Map of burned area in Canada's forested ecosystems for the 2023 fire session at 30-m spatial resolution mapped from time-series data from Sentinel-2A and -2B, and Landsat-8 and -9 using the Tracking Intra- and Inter-year Change (TIIC) algorithm (Pelletier et al. 2024). It is developed within the framework of Canada’s National Terrestrial Ecosystem Monitoring System (NTEMS). Fires are grouped into two classes based on detection period: summer fires and fall fires. Summer burned pixels were detected between May 30 and September 17, and fall burned pixels were detected between September 17 and October 25. For summer fires, burned pixels were identified by TIIC as changed and typed as fire. For the fall period, TIIC only detected changes within a 4-km buffer of the NRCan fire perimeters (https://cwfis.cfs.nrcan.gc.ca/datamart). This approach was used to limit commission errors that can occur due to known limitations of mapping with optical data in the fall due to phenology, snow cover, or low sun angles. For the 2023 fire season, the TIIC algorithm detected 12.74 Mha of burned area in Canada's forested ecozones, representing 1.8% of the total forest-dominated ecozone area. Of the 12.74 Mha, 11.57 Mha (90.9%) was burned by summer fires and 1.16 Mha (9.1%) by fall fires (Pelletier et al, 2024). When using this data, please cite as: Pelletier, F., Cardille, J.A., Wulder, M.A., White, J.C., Hermosilla, T., 2024. Revisiting the 2023 wildfire season in Canada. Science of Remote Sensing. 10, 100145. (Pelletier et al. 2024).

This dataset shows the locations of ignition points for forest fires less than 40 hectares in size. Fires that grow larger than 40 hectares are mapped in the [Fire Disturbance Area](https://data.ontario.ca/dataset/fire-disturbance-area-firedstb) dataset. The [Forest Fire Info Map](https://www.gisapplication.lrc.gov.on.ca/ForestFireInformationMap/index.html?viewer=FFIM.FFIM&locale=en-US) shows active fires, current fire danger and restricted fire zones in place due to high fire danger.