## Get data on boundaries of local climatic areas used for forest fire weather forecasting. This dataset shows the boundaries of administrative areas used for forest fire weather forecasting. North of the French River, boundaries correspond closely with Environment Canada’s areas for public weather forecasting. South of the French River, 25 Environment Canada areas are combined into six larger areas for provincial forecasting.

This dataset shows the boundaries of the province's six fire management zones that existed prior to 2014 in which most forest fires received the same type of response. These management zones were based on: * common forest and forest fire management objectives * land use * density of values at risk * fire load * forest ecology The 2014 Wildland Fire Management Strategy moved from a zone-based approach to one where each wildland fire is assessed and receives an appropriate response according to the circumstances and condition of the fire.

Hazardous forest types for wildland fire means forest types assessed as being associated with the risk of high to extreme wildland fire. This data is intended to help inform where further assessment is required and is to be used in conjunction with guidance from the Ministry of Natural Resources and Forestry .

Fire perimeters for this year's forest fires in Ontario. Fire perimeters are illustrations only and may not be exact in relation to actual physical locations. The Ontario Ministry of Natural Resources does not capture perimeters for every fire. Fire perimeters are not captured in real time; each capture depends on available resources and weather conditions and may be several days old. During fire season, perimeter data is updated every 24 hours as improved information becomes available; therefore, reported fire size may fluctuate from day to day. The Ontario Ministry of Natural Resources shall not be liable in any way for the use of, or reliance upon this information. The [Forest Fire Info Map](https://www.lioapplications.lrc.gov.on.ca/ForestFireInformationMap/index.html?viewer=FFIM.FFIM&locale=en-CA) shows active fires, current fire danger and restricted fire zones in place due to high fire danger.

This dataset shows the locations of ignition points for forest fires less than 40 hectares in size. Fires that grow larger than 40 hectares are mapped in the [Fire Disturbance Area](https://data.ontario.ca/dataset/fire-disturbance-area-firedstb) dataset. The [Forest Fire Info Map](https://www.gisapplication.lrc.gov.on.ca/ForestFireInformationMap/index.html?viewer=FFIM.FFIM&locale=en-US) shows active fires, current fire danger and restricted fire zones in place due to high fire danger.

The dataset provides most recent fire scar mapping for many major fires that have burnt in a given area within or adjacent to National Parks and Wildlife South Australia (NPWSA) reserves. This data set is derived from Fire History mapping. The most recent fire mapping can be used for operational management and planning of fire events and ecological resource management.

최근10년간 전국에서 발생한 전체 화재 데이터 현황으로 제공하고 있는 항목으로는 발화일시, 인명피해, 재산피해, 시도, 시군구가 있음

A Fire Disturbance Area represents the mapped exterior perimeter of a forest fire. Mapping is derived from a variety of sources, such as GPS points and digitized paper maps. Prior to 1998, only fires greater than 200 hectares were mapped. Since 1998, fires greater than 40 hectares have been mapped. If adequate mapping exists for fires less than 40 hectares in size, they will be included in this data class. The [Forest Fire Info Map](https://www.lioapplications.lrc.gov.on.ca/ForestFireInformationMap/index.html?viewer=FFIM.FFIM) shows active fires, current fire danger and restricted fire zones in place due to high fire danger.