Multibeam and acoustic backscatter data collected from NOAA Ship Nancy Foster from 2021-03-18 to 2021-04-10. Data was collected using a Kongsberg EM2040. Bathymetry grids were created using CARIS HIPS and SIPS software, and corrected to Mean Lower Low Water (MLLW). Backscatter mosaics were created using Fledermaus Geocoder Toolbox (FMGT). Data were acquired and processed to meet IHO Order 1 specifications. Survey depths vary from 40m to 190m. Data are available in one and two meter resolutions. During the field mission, a Mohawk 18 Remotely Operated Vehicle (ROV), operated by the University of North Carolina Undersea Vehicles Program collected HD photo and ground validation video. Video data is not included with this dataset.

Multibeam and acoustic backscatter data collected from NOAA Ship Nancy Foster from 2023-05-01 to 2023-05-10. The majority of these data were collected using a Kongsberg EM2040. Bathymetry grids were created using Qimera, and corrected to Mean Lower Low Water (MLLW). Backscatter mosaics were created using Fledermaus Geocoder Toolbox (FMGT). Data were acquired and processed to meet IHO Order 1 specifications. Survey depths vary from 33m to 58m. Processed data are available at 2m resolution. During the field mission, a Mohawk 18 Remotely Operated Vehicle (ROV), operated by the University of North Carolina Undersea Vehicles Program collected HD photo and ground validation video. Video data is not included with this dataset. HD photos and video data are not included with this dataset.

Multibeam and acoustic backscatter data collected from NOAA Ship Nancy Foster from 2022-03-14 to 2022-03-31. The majority of these data were collected using a Kongsberg EM710, with the most inshore portion collected using a Kongsberg EM2040. Bathymetry grids were created using Qimera, and corrected to Mean Lower Low Water (MLLW). Backscatter mosaics were created using Fledermaus Geocoder Toolbox (FMGT). Data were acquired and processed to meet IHO Order 1 specifications. Survey depths vary from 10m to over 1800m. EM710 data are available at 8m, 16m and 32m resolution. EM2040 data are available at 2m resolution. During the field mission, a Mohawk 18 Remotely Operated Vehicle (ROV), operated by the University of North Carolina Undersea Vehicles Program collected HD photo and ground validation video. Video and photo data are not included with this dataset.

Multibeam and acoustic backscatter data collected from NOAA Ship Nancy Foster from 2018-06-29 to 2018-07-06. The majority of data were collected using a Kongsberg EM710, with the most northern inshore portion collected using a Kongsberg EM2040. Bathymetry grids were created using CARIS HIPS and SIPS software, and corrected to Mean Lower Low Water (MLLW). Backscatter mosaics were created using FMGT. Data were acquired and processed to meet IHO Order 1 specifications. Survey depths vary from 10m to over 1300m. EM710 data are available in an 8m resolution, and EM2040 data are available at 2m resolution. During the field mission, a Mohawk 18 Remotely Operated Vehicle (ROV), operated by the University of North Carolina Undersea Vehicles Program collected HD photo and ground validation video. Photo and video data are not included with this dataset.

Multibeam and acoustic backscatter data collected from NOAA Ship Nancy Foster from 2019-07-02 to 2019-07-12. The majority of these data were collected using a Kongsberg EM710, with the most inshore portion collected using a Kongsberg EM2040. Bathymetry grids were created using CARIS HIPS and SIPS software, and corrected to Mean Lower Low Water (MLLW). Backscatter mosaics were created using FMGT. Data were acquired and processed to meet IHO Order 1 specifications. Survey depths vary from 10m to over 2800m. EM710 data are available at 16m resolution, and EM2040 data are available at 2m resolution. During the field mission, a Mohawk 18 Remotely Operated Vehicle (ROV), operated by the University of North Carolina Undersea Vehicles Program collected HD photo and ground validation video. Imagery data is not included with this dataset.

Multibeam bathymetry and acoustic backscatter data collected by NOAA Ship Nancy Foster from 2024-06-12 to 2024-06-18. These data were collected using a Kongsberg EM2040 multibeam echosounder (MBES). Bathymetry grids were created using Qimera; depths are referenced to the North American Vertical Datum of 1988 (NAVD88). Backscatter mosaics were created using Fledermaus Geocoder Toolbox (FMGT). Survey depths range from 25 to 33 meters. Processed grids are available at 0.5 and 1m resolution.

NOAA's NOS/NCCOS/CCMA Biogeography Team, in collaboration with NOAA Ship Nancy Foster, federal, academic, and private sector partners conducted the 2016 Seafloor Mapping of the US Caribbean project. Several areas of interest were explored and surveyed during the field mission in the eastern Puerto Rico region. H12935 was conducted on along the southeastern Puerto Rican shelf edge using a deep water Em 710 multibeam echo sounder (mbes) at 100khz. H12936 was conducted north of the Isla de Culebra over the broad moderately shallow insular shelf using a 400 khz Reson 7125 mbes. A third opportunistic survey was conducted along the edge of the USVI insular shelf south of St. Thomas to conjoin previous NOAA Ship Nancy Foster mission surveys. During the field mission, a Remotely Operated Vehicle owned by the University of North Carolina collected HD photo and video ground validation video. Data was processed by a NOAA contractor using CARIS HIPS software. Data has all correctors applied (attitude, sound velocity) and has been reduced to mean lower low water (MLLW) using final approved tides from NOAA COOPS. Data is spatially referenced in UTM Zone 20 North, Datum WGS84. The project was conducted to meet IHO order 1 and 2 accuracy standards, dependent on the project area and depth. All users should individually evaluate the suitability of this data according to their own needs and standards.

We created merged bathymetry surfaces segmented in GeoTiff format by resolution and depth within the Channel Islands National Marine Sanctuary (CINMS) from more than 20 multibeam mapping surveys. These bathymetry data were collected between 1998 and 2022 by National Oceanic and Atmospheric Administration (NOAA), United States Geological Survey (USGS), Monterey Bay Aquarium Research Institute (MBARI) California State University, Monterey Bay (CSUMB) and Ocean Exploration Trust (OET). Bathymetry data collected by institutions outside of NOAA are reference to overlapping NOAA hydrographic surveys using an average depth difference correction. The merged bathymetric surface resolutions varied by depth from 2x2m in <40m, 4x4m in 36 to 80 m, 8x8m in 72 to 160m, 16x16m in 144 to 320m and to 24x24m in >300m. They can be used to create high-resolution, nearly continuous coverage benthic habitat maps within the CINMS.

This dataset is an inventory of seafloor mapping data from hydrographic multibeam sonar surveys and georeferenced benthic photographs and video clips, all collected in and around the Florida Keys National Marine Sanctuary (FKNMS). The multibeam data sets contain both bathymetric and backscatter data for the FKNMS and adjacent areas in the Atlantic Ocean, bounded to the North by the Florida Keys, and contain detailed surveys of various portions of FKNMS such as the Dry Tortugas and Tortugas Bank areas. Underwater video and photographs for ground validation were acquired during research cruises in the FKNMS. All of these datasets can be visualized online in the 2nd edition of the FKNMS Digital Atlas.

NOAA's NOS/NCCOS/CCMA Biogeography Team, in collaboration with NOAA vessel NOAA Ship Nancy Foster and territory, federal, and private sector partners, conducted the twelfth year of an ongoing scientific research mission onboard NOAA Ship Nancy Foster, funded by NOAA’s Coral Reef Conservation Program. Data was acquired with a hull-mounted Reson 7125 multibeam echosounder (400 kHz) and a Kongsberg Em710 (100khz) along the shelf edge and slopes south of St. Croix and the banks and shelf edge north of St. Thomas in the US Virgin Islands. Data was processed by a NOAA contractor using CARIS HIPS and Fledermaus FMGT mapping software. Data has all correctors applied (attitude, sound velocity) and has been reduced to mean lower low water (MLLW) using final approved tides from NOAA COOPS. Data is in UTM zone 20 north, datum NAD83, and was conducted to meet IHO order 1 and 2 accuracy standards, dependent on the project area and depth. All users should individually evaluate the suitability of this data according to their own needs and standards.