The U.S. Geological Survey (USGS) contracted with Hawaii-based Aerial Surveying, Inc. to collect lidar-derived elevation data over the low-lying areas within the northwestern Hawaiian Islands (NWHI) during the summer of 2010. A separate contract issued to Aerial Surveying, Inc. by the National Oceanic and Atmospheric Administration (NOAA) funded the lidar data processing and elevation data product development phases of the project. Lidar data provide high resolution digital elevation models that are used for many applications, including but not limited to sea level rise modeling, habitat assessments, and tsunami inundation modeling. In April 2011, NOAA Papahanaumokuakea Marine National Monument and NOAA Office for Coastal Management deployed a survey crew to the NWHI to collect high accuracy point data to validate the 2010 lidar data. The survey crew used survey-grade Global Positioning System (GPS) receivers to collect high accuracy elevation points. This metadata covers the information for Midway Atoll. This dataset contains lidar point clouds in LAS 1.2 format, classified in the following ASPRS standards as Class 1: Unclassified, Class 2: Ground, and Class 9: Water. The following are the equipment used to create the lidar data sets. Aircraft: Beechcraft Queen Air Lidar Systems: Riegl 140 and 240 Accuracy statements are based on areas of open terrain, with points classified as ground. The accuracy of each point is expected to meet the vertical accuracy standard, derived products may be less accurate in areas of extreme terrain and dense vegetation due to a lesser number of points defining the ground in these areas. Classified data sets such as this one may have varying posting due to some pulses not reaching the ground. This work was conducted under permit number PMNM-2010-033 as approved by NOAA, the U.S. Fish and Wildlife Service (USFWS), and the State of Hawaii, and acknowledged by Dr. Charles L. Littnan of NOAA's Pacific Islands Fisheries Science Center. Original contact information: Contact Name: Lidar Manager Contact Org: Aerial Surveying Inc. Title: Lidar Manager Phone: (808) 327-9439

The U.S. Geological Survey (USGS) contracted with Hawaii-based Aerial Surveying, Inc. to collect lidar-derived elevation data over the low-lying areas within the northwestern Hawaiian Islands (NWHI) during the summer of 2010. A separate contract issued to Aerial Surveying, Inc. by the National Oceanic and Atmospheric Administration (NOAA) funded the lidar data processing and elevation data product development phases of the project. Lidar data provide high resolution digital elevation models that are used for many applications, including but not limited to sea level rise modeling, habitat assessments, and tsunami inundation modeling. In April 2011, NOAA Papahanaumokuakea Marine National Monument and NOAA Office for Coastal Management deployed a survey crew to the NWHI to collect high accuracy point data to validate the 2010 lidar data. The survey crew used survey-grade Global Positioning System (GPS) receivers to collect high accuracy elevation points. This metadata covers the information for Lisianki Island. This dataset contains lidar point clouds in LAS 1.2 format, classified in the following ASPRS standards as Class 1: Unclassified, Class 2: Ground, and Class 9: Water. The following are the equipment used to create the lidar data sets. Aircraft: Beechcraft Queen Air Lidar Systems: Riegl 140 and 240 Accuracy statements are based on areas of open terrain, with points classified as ground. The accuracy of each point is expected to meet the vertical accuracy standard, derived products may be less accurate in areas of extreme terrain and dense vegetation due to a lesser number of points defining the ground in these areas. Classified data sets such as this one may have varying posting due to some pulses not reaching the ground. This work was conducted under permit number PMNM-2010-033 as approved by NOAA, the U.S. Fish and Wildlife Service (USFWS), and the State of Hawaii, and acknowledged by Dr. Charles L. Littnan of NOAA's Pacific Islands Fisheries Science Center. Original contact information: Contact Name: Lidar Manager Contact Org: Aerial Surveying Inc. Title: Lidar Manager Phone: (808) 327-9439

The U.S. Geological Survey (USGS) contracted with Hawaii-based Aerial Surveying, Inc. to collect lidar-derived elevation data over the low-lying areas within the northwestern Hawaiian Islands (NWHI) during the summer of 2010. A separate contract issued to Aerial Surveying, Inc. by the National Oceanic and Atmospheric Administration (NOAA) funded the lidar data processing and elevation data product development phases of the project. Lidar data provide high resolution digital elevation models that are used for many applications, including but not limited to sea level rise modeling, habitat assessments, and tsunami inundation modeling. In April 2011, NOAA Papahanaumokuakea Marine National Monument and NOAA Office for Coastal Management deployed a survey crew to the NWHI to collect high accuracy point data to validate the 2010 lidar data. The survey crew used survey-grade Global Positioning System (GPS) receivers to collect high accuracy elevation points. This metadata covers the information for Laysan Island. This dataset contains lidar point clouds in LAS 1.2 format, classified in the following ASPRS standards as Class 1: Unclassified, Class 2: Ground, and Class 9: Water. The following are the equipment used to create the lidar data sets. Aircraft: Beechcraft Queen Air Lidar Systems: Riegl 140 and 240 Accuracy statements are based on areas of open terrain, with points classified as ground. The accuracy of each point is expected to meet the vertical accuracy standard, derived products may be less accurate in areas of extreme terrain and dense vegetation due to a lesser number of points defining the ground in these areas. Classified data sets such as this one may have varying posting due to some pulses not reaching the ground. This work was conducted under permit number PMNM-2010-033 as approved by NOAA, the U.S. Fish and Wildlife Service (USFWS), and the State of Hawaii, and acknowledged by Dr. Charles L. Littnan of NOAA's Pacific Islands Fisheries Science Center. Original contact information: Contact Name: Lidar Manager Contact Org: Aerial Surveying Inc. Title: Lidar Manager Phone: (808) 327-9439

The U.S. Geological Survey (USGS) contracted with Hawaii-based Aerial Surveying, Inc. to collect lidar-derived elevation data over the low-lying areas within the northwestern Hawaiian Islands (NWHI) during the summer of 2010. A separate contract issued to Aerial Surveying, Inc. by the National Oceanic and Atmospheric Administration (NOAA) funded the lidar data processing and elevation data product development phases of the project. Lidar data provide high resolution digital elevation models that are used for many applications, including but not limited to sea level rise modeling, habitat assessments, and tsunami inundation modeling. In April 2011, NOAA Papahanaumokuakea Marine National Monument and NOAA Office for Coastal Management deployed a survey crew to the NWHI to collect high accuracy point data to validate the 2010 lidar data. The survey crew used survey-grade Global Positioning System (GPS) receivers to collect high accuracy elevation points. This metadata covers the information for Pearl and Hermes. This dataset contains lidar point clouds in LAS 1.2 format, classified in the following ASPRS standards as Class 1: Unclassified, Class 2: Ground, and Class 9: Water. The following are the equipment used to create the lidar data sets. Aircraft: Beechcraft Queen Air Lidar Systems: Riegl 140 and 240 Accuracy statements are based on areas of open terrain, with points classified as ground. The accuracy of each point is expected to meet the vertical accuracy standard, derived products may be less accurate in areas of extreme terrain and dense vegetation due to a lesser number of points defining the ground in these areas. Classified data sets such as this one may have varying posting due to some pulses not reaching the ground. This work was conducted under permit number PMNM-2010-033 as approved by NOAA, the U.S. Fish and Wildlife Service (USFWS), and the State of Hawaii, and acknowledged by Dr. Charles L. Littnan of NOAA's Pacific Islands Fisheries Science Center. Original contact information: Contact Name: Lidar Manager Contact Org: Aerial Surveying Inc. Title: Lidar Manager Phone: (808) 327-9439

The Oahu, Hawaii Elevation Data Task Order involves collecting and delivering topographic elevation point data derived from multiple return light detection and ranging (LiDAR) measurements on the island of Oahu in Hawaii. The Statement of Work (SOW) for the area covering the northern 2/3 of Oahu was developed by the National Oceanic and Atmospheric Administration's (NOAA) Office for Coastal Management. A separate but related task order was issued by the USGS National Geospatial Technical Operations Center (NGTOC), under their Geospatial Products and Services Contract (GPSC), to leverage the same resources committed to the NOAA LiDAR project for the acquisition of LiDAR data in the southern 1/3 portion of Oahu. The combined task orders yielded one study area covering the entire island of Oahu. The data collected for the island of Oahu will exhibit Hydro Flattened DEMs for inclusion into the NED. The purpose of the data is for use in coastal management decision making, including applications such as flood plain mapping and water rights management. The point density for this data set was specified in the SOW at 1.15 pts/m2. The NOAA Office for Coastal Management tested the NPS (nominal pulse spacing) for this data set in April 2015. The NPS was determined to be 0.84 m. The data used in the NPS determination were the first returns of classes 1,2,9, and 10.

LIDAR data is remotely sensed high-resolution elevation data collected by an airborne collection platform. Using a combination of laser rangefinding, GPS positioning and inertial measurement technologies; LIDAR instruments are able to make highly detailed Digital Elevation Models (DEMs) of the earth's terrain, man-made structures and vegetation. This data was collected over a 100 meter swath of the Oahu, Hawaii coastline with a Leica ALS-40 Aerial Lidar Sensor. Multiple returns were recorded for each pulse in addition to an intensity value. Original contact information: Contact Org: NOAA Office for Coastal Management Phone: 843-740-1202 Email: coastal.info@noaa.gov

The Oahu, Hawaii Elevation Data Task Order involves collecting and delivering topographic elevation point data derived from multiple return light detection and ranging (LiDAR) measurements on the island of Oahu in Hawaii. The Statement of Work (SOW) for the area covering the northern 2/3 of Oahu was developed by the National Oceanic and Atmospheric Administration's (NOAA) Office for Coastal Management. A separate but related task order was issued by the USGS National Geospatial Technical Operations Center (NGTOC), under their Geospatial Products and Services Contract (GPSC), to leverage the same resources committed to the NOAA LiDAR project for the acquisition of LiDAR data in the southern 1/3 portion of Oahu. The combined task orders yielded one study area covering the entire island of Oahu. The data collected for the island of Oahu will exhibit Hydro Flattened DEMs for inclusion into the NED. The purpose of the data is for use in coastal management decision making, including applications such as flood plain mapping and water rights management. The point density for this data set was specified in the SOW at 1.15 pts/m2. The NOAA Office for Coastal Management tested the NPS (nominal pulse spacing) for this data set in April 2015. The NPS was determined to be 0.84 m. The data used in the NPS determination were the first returns of classes 1,2,9, and 10.

LIDAR data is remotely sensed high-resolution elevation data collected by an airborne collection platform. Using a combination of laser rangefinding, GPS positioning and inertial measurement technologies; LIDAR instruments are able to make highly detailed Digital Elevation Models (DEMs) of the earth's terrain, man-made structures and vegetation. This data was collected over a portion of Maui and Oahu, Hawaii with a Leica ALS-40 Aerial Lidar Sensor. Multiple returns were recorded for each pulse in addition to an intensity value. Original contact information: Contact Org: NOAA Office for Coastal Management Phone: 843-740-1202 Email: coastal.info@noaa.gov

Light Detection and Ranging (LiDAR) data is remotely sensed high-resolution elevation data collected by an airborne collection platform. This LiDAR dataset is a survey of American Samoa including the islands of Tutuila, Aunu'u, Ofu, Olosega, Ta'u and Rose Atoll. The project area consists of approximately 75 square miles. The project design of the LiDAR data acquisition was developed to support a nominal post spacing of 1.0 meter or better (1.0 meter GSD). GMR Aerial Surveys Inc. d/b/a Photo Science, Inc. acquired 108 flight lines in 7 lifts between June 2012 and July 2012. This collection was for NOAA Office for Coastal Management (OCM). The data collection was performed with a Beechcraft King Air 90 twin engine aircraft (tail number N87E) utilizing an Optech Gemini sensor; collecting multiple return x, y, and z as well as intensity data. The data were provided to OCM, classified as: Unclassified (1), Ground (2), Low Point (Noise) (7), Water (9), Breakline Edge (10), Overlap Unclassified (17) and Overlap Ground (18). The classifications available for download from the Digital Coast are: Unclassified (1), Ground (2), Low Point (Noise) 7, Water (9), Removed Ground (breakline edge) (10), and Overlap (12). The collection conditions were cloud and fog-free between the aircraft and the ground; streams must be within their banks; and low tide acquisition if at all possible. Data voids within a single swath were avoided whenever possible. Acceptable void areas are caused by a water body; areas of low near infrared (NIR) reflectivity such as asphalt or composition roofing and where appropriately filled in by another swath. Unfortunately, during the LiDAR acquisition there were a few mountain peaks where the clouds never lifted high enough to collect LiDAR. In order to post process the LiDAR data to meet task order specifications, Photo Science, Inc. established control points that were used to calibrate the LiDAR to known ground locations established on Tutuila. Please see the survey report for more details on ground control point collection at: https://noaa-nos-coastal-lidar-pds.s3.amazonaws.com/laz/geoid12a/2490/supplemental/PhotoScience-AmSam_PostFlightAcquisitionReport_FINAL.pdf The dataset was developed based on a horizontal projection/datum of UTM NAD83 (PACP00), UTM Zone 2, meters. The vertical datum used during the collection, varied by island. NAVD88 (ASVD02), meters was used for the island of Tutuila (and Aunu'u). NAVD1988 (GEOID09), meters was used for the islands of Ofu, Olosega and Tau. Rose atoll was adjusted from Ellipsoid heights to a mean low water (MLW) datum. Upon receipt of the data, the NOAA Office for Coastal Management converted the lidar data to geographic coordinates and ellipsoid heights using GEOID09. Rose Atoll data were converted to geographic coordinates and to ellipsoid heights using the MLW correction value of 22.8 m. Conversion is for data storage and Digital Coast provisioning purposes. LiDAR data was collected in RAW flightline swath format and processed to create Classified LAS 1.2 files.

These data provide an accurate high-resolution shoreline compiled from imagery of Kure Atoll, Northwestern Hawaiian Islands, HI . This vector shoreline data is based on an office interpretation of imagery that may be suitable as a geographic information system (GIS) data layer. This metadata describes information for both the line and point shapefiles. The NGS attribution scheme 'Coastal Cartographic Object Attribute Source Table (C-COAST)' was developed to conform the attribution of various sources of shoreline data into one attribution catalog. C-COAST is not a recognized standard, but was influenced by the International Hydrographic Organization's S-57 Object-Attribute standard so the data would be more accurately translated into S-57. This resource is a member of https://www.fisheries.noaa.gov/inport/item/39808