The Oahu, Hawaii Elevation Data Task Order involves collecting and delivering topographic elevation point data derived from multiple return light detection and ranging (LiDAR) measurements on the island of Oahu in Hawaii. The Statement of Work (SOW) for the area covering the northern 2/3 of Oahu was developed by the National Oceanic and Atmospheric Administration's (NOAA) Office for Coastal Management. A separate but related task order was issued by the USGS National Geospatial Technical Operations Center (NGTOC), under their Geospatial Products and Services Contract (GPSC), to leverage the same resources committed to the NOAA LiDAR project for the acquisition of LiDAR data in the southern 1/3 portion of Oahu. The combined task orders yielded one study area covering the entire island of Oahu. The data collected for the island of Oahu will exhibit Hydro Flattened DEMs for inclusion into the NED. The purpose of the data is for use in coastal management decision making, including applications such as flood plain mapping and water rights management. The point density for this data set was specified in the SOW at 1.15 pts/m2. The NOAA Office for Coastal Management tested the NPS (nominal pulse spacing) for this data set in April 2015. The NPS was determined to be 0.84 m. The data used in the NPS determination were the first returns of classes 1,2,9, and 10.

The Oahu, Hawaii Elevation Data Task Order involves collecting and delivering topographic elevation point data derived from multiple return light detection and ranging (LiDAR) measurements on the island of Oahu in Hawaii. The Statement of Work (SOW) for the area covering the northern 2/3 of Oahu was developed by the National Oceanic and Atmospheric Administration's (NOAA) Office for Coastal Management. A separate but related task order was issued by the USGS National Geospatial Technical Operations Center (NGTOC), under their Geospatial Products and Services Contract (GPSC), to leverage the same resources committed to the NOAA LiDAR project for the acquisition of LiDAR data in the southern 1/3 portion of Oahu. The combined task orders yielded one study area covering the entire island of Oahu. The data collected for the island of Oahu will exhibit Hydro Flattened DEMs for inclusion into the NED. The purpose of the data is for use in coastal management decision making, including applications such as flood plain mapping and water rights management. The point density for this data set was specified in the SOW at 1.15 pts/m2. The NOAA Office for Coastal Management tested the NPS (nominal pulse spacing) for this data set in April 2015. The NPS was determined to be 0.84 m. The data used in the NPS determination were the first returns of classes 1,2,9, and 10.

The U.S. Geological Survey (USGS) contracted with Hawaii-based Aerial Surveying, Inc. to collect lidar-derived elevation data over the low-lying areas within the northwestern Hawaiian Islands (NWHI) during the summer of 2010. A separate contract issued to Aerial Surveying, Inc. by the National Oceanic and Atmospheric Administration (NOAA) funded the lidar data processing and elevation data product development phases of the project. Lidar data provide high resolution digital elevation models that are used for many applications, including but not limited to sea level rise modeling, habitat assessments, and tsunami inundation modeling. In April 2011, NOAA Papahanaumokuakea Marine National Monument and NOAA Office for Coastal Management deployed a survey crew to the NWHI to collect high accuracy point data to validate the 2010 lidar data. The survey crew used survey-grade Global Positioning System (GPS) receivers to collect high accuracy elevation points. This metadata covers the information for Laysan Island. This dataset contains lidar point clouds in LAS 1.2 format, classified in the following ASPRS standards as Class 1: Unclassified, Class 2: Ground, and Class 9: Water. The following are the equipment used to create the lidar data sets. Aircraft: Beechcraft Queen Air Lidar Systems: Riegl 140 and 240 Accuracy statements are based on areas of open terrain, with points classified as ground. The accuracy of each point is expected to meet the vertical accuracy standard, derived products may be less accurate in areas of extreme terrain and dense vegetation due to a lesser number of points defining the ground in these areas. Classified data sets such as this one may have varying posting due to some pulses not reaching the ground. This work was conducted under permit number PMNM-2010-033 as approved by NOAA, the U.S. Fish and Wildlife Service (USFWS), and the State of Hawaii, and acknowledged by Dr. Charles L. Littnan of NOAA's Pacific Islands Fisheries Science Center. Original contact information: Contact Name: Lidar Manager Contact Org: Aerial Surveying Inc. Title: Lidar Manager Phone: (808) 327-9439

The U.S. Geological Survey (USGS) contracted with Hawaii-based Aerial Surveying, Inc. to collect lidar-derived elevation data over the low-lying areas within the northwestern Hawaiian Islands (NWHI) during the summer of 2010. A separate contract issued to Aerial Surveying, Inc. by the National Oceanic and Atmospheric Administration (NOAA) funded the lidar data processing and elevation data product development phases of the project. Lidar data provide high resolution digital elevation models that are used for many applications, including but not limited to sea level rise modeling, habitat assessments, and tsunami inundation modeling. In April 2011, NOAA Papahanaumokuakea Marine National Monument and NOAA Office for Coastal Management deployed a survey crew to the NWHI to collect high accuracy point data to validate the 2010 lidar data. The survey crew used survey-grade Global Positioning System (GPS) receivers to collect high accuracy elevation points. This metadata covers the information for Lisianki Island. This dataset contains lidar point clouds in LAS 1.2 format, classified in the following ASPRS standards as Class 1: Unclassified, Class 2: Ground, and Class 9: Water. The following are the equipment used to create the lidar data sets. Aircraft: Beechcraft Queen Air Lidar Systems: Riegl 140 and 240 Accuracy statements are based on areas of open terrain, with points classified as ground. The accuracy of each point is expected to meet the vertical accuracy standard, derived products may be less accurate in areas of extreme terrain and dense vegetation due to a lesser number of points defining the ground in these areas. Classified data sets such as this one may have varying posting due to some pulses not reaching the ground. This work was conducted under permit number PMNM-2010-033 as approved by NOAA, the U.S. Fish and Wildlife Service (USFWS), and the State of Hawaii, and acknowledged by Dr. Charles L. Littnan of NOAA's Pacific Islands Fisheries Science Center. Original contact information: Contact Name: Lidar Manager Contact Org: Aerial Surveying Inc. Title: Lidar Manager Phone: (808) 327-9439

The U.S. Geological Survey (USGS) contracted with Hawaii-based Aerial Surveying, Inc. to collect lidar-derived elevation data over the low-lying areas within the northwestern Hawaiian Islands (NWHI) during the summer of 2010. A separate contract issued to Aerial Surveying, Inc. by the National Oceanic and Atmospheric Administration (NOAA) funded the lidar data processing and elevation data product development phases of the project. Lidar data provide high resolution digital elevation models that are used for many applications, including but not limited to sea level rise modeling, habitat assessments, and tsunami inundation modeling. In April 2011, NOAA Papahanaumokuakea Marine National Monument and NOAA Office for Coastal Management deployed a survey crew to the NWHI to collect high accuracy point data to validate the 2010 lidar data. The survey crew used survey-grade Global Positioning System (GPS) receivers to collect high accuracy elevation points. This metadata covers the information for Kure Atoll. This dataset contains lidar point clouds in LAS 1.2 format, classified in the following ASPRS standards as Class 1: Unclassified, Class 2: Ground, and Class 9: Water. The following are the equipment used to create the lidar data sets. Aircraft: Beechcraft Queen Air Lidar Systems: Riegl 140 and 240 Accuracy statements are based on areas of open terrain, with points classified as ground. The accuracy of each point is expected to meet the vertical accuracy standard, derived products may be less accurate in areas of extreme terrain and dense vegetation due to a lesser number of points defining the ground in these areas. Classified data sets such as this one may have varying posting due to some pulses not reaching the ground. This work was conducted under permit number PMNM-2010-033 as approved by NOAA, the U.S. Fish and Wildlife Service (USFWS), and the State of Hawaii, and acknowledged by Dr. Charles L. Littnan of NOAA's Pacific Islands Fisheries Science Center. Original contact information: Contact Name: Lidar Manager Contact Org: Aerial Surveying Inc. Title: Lidar Manager Phone: (808) 327-9439

The U.S. Geological Survey (USGS) contracted with Hawaii-based Aerial Surveying, Inc. to collect lidar-derived elevation data over the low-lying areas within the northwestern Hawaiian Islands (NWHI) during the summer of 2010. A separate contract issued to Aerial Surveying, Inc. by the National Oceanic and Atmospheric Administration (NOAA) funded the lidar data processing and elevation data product development phases of the project. Lidar data provide high resolution digital elevation models that are used for many applications, including but not limited to sea level rise modeling, habitat assessments, and tsunami inundation modeling. In April 2011, NOAA Papahanaumokuakea Marine National Monument and NOAA Office for Coastal Management deployed a survey crew to the NWHI to collect high accuracy point data to validate the 2010 lidar data. The survey crew used survey-grade Global Positioning System (GPS) receivers to collect high accuracy elevation points. This metadata covers the information for Midway Atoll. This dataset contains lidar point clouds in LAS 1.2 format, classified in the following ASPRS standards as Class 1: Unclassified, Class 2: Ground, and Class 9: Water. The following are the equipment used to create the lidar data sets. Aircraft: Beechcraft Queen Air Lidar Systems: Riegl 140 and 240 Accuracy statements are based on areas of open terrain, with points classified as ground. The accuracy of each point is expected to meet the vertical accuracy standard, derived products may be less accurate in areas of extreme terrain and dense vegetation due to a lesser number of points defining the ground in these areas. Classified data sets such as this one may have varying posting due to some pulses not reaching the ground. This work was conducted under permit number PMNM-2010-033 as approved by NOAA, the U.S. Fish and Wildlife Service (USFWS), and the State of Hawaii, and acknowledged by Dr. Charles L. Littnan of NOAA's Pacific Islands Fisheries Science Center. Original contact information: Contact Name: Lidar Manager Contact Org: Aerial Surveying Inc. Title: Lidar Manager Phone: (808) 327-9439

The U.S. Geological Survey (USGS) contracted with Hawaii-based Aerial Surveying, Inc. to collect lidar-derived elevation data over the low-lying areas within the northwestern Hawaiian Islands (NWHI) during the summer of 2010. A separate contract issued to Aerial Surveying, Inc. by the National Oceanic and Atmospheric Administration (NOAA) funded the lidar data processing and elevation data product development phases of the project. Lidar data provide high resolution digital elevation models that are used for many applications, including but not limited to sea level rise modeling, habitat assessments, and tsunami inundation modeling. In April 2011, NOAA Papahanaumokuakea Marine National Monument and NOAA Office for Coastal Management deployed a survey crew to the NWHI to collect high accuracy point data to validate the 2010 lidar data. The survey crew used survey-grade Global Positioning System (GPS) receivers to collect high accuracy elevation points. This metadata covers the information for Pearl and Hermes. This dataset contains lidar point clouds in LAS 1.2 format, classified in the following ASPRS standards as Class 1: Unclassified, Class 2: Ground, and Class 9: Water. The following are the equipment used to create the lidar data sets. Aircraft: Beechcraft Queen Air Lidar Systems: Riegl 140 and 240 Accuracy statements are based on areas of open terrain, with points classified as ground. The accuracy of each point is expected to meet the vertical accuracy standard, derived products may be less accurate in areas of extreme terrain and dense vegetation due to a lesser number of points defining the ground in these areas. Classified data sets such as this one may have varying posting due to some pulses not reaching the ground. This work was conducted under permit number PMNM-2010-033 as approved by NOAA, the U.S. Fish and Wildlife Service (USFWS), and the State of Hawaii, and acknowledged by Dr. Charles L. Littnan of NOAA's Pacific Islands Fisheries Science Center. Original contact information: Contact Name: Lidar Manager Contact Org: Aerial Surveying Inc. Title: Lidar Manager Phone: (808) 327-9439

This metadata document describes the collection and processing of Light Detection and Ranging (LIDAR) data over an area along the coast of Maine. Data was collected at a nominal two (2) meter post spacing between points. Two elevation data sets were compiled in this project, first surface returns, in which features that are above the ground, such as buildings, bridges, tree tops, etc. have not been eliminated and a Bare Earth Data set. Original contact information: Contact Org: NOAA Office for Coastal Management Phone: 843-740-1202 Email: coastal.info@noaa.gov

LIDAR data is remotely sensed high-resolution elevation data collected by an airborne collection platform. Using a combination of laser rangefinding, GPS positioning and inertial measurement technologies; LIDAR instruments are able to make highly detailed Digital Elevation Models (DEMs) of the earth's terrain, man-made structures and vegetation. This data was collected at submeter resolution to provide nominal 1m spacing of collected points. Two returns were recorded for each pulse in addition to an intensity value. Original contact information: Contact Org: NOAA Office for Coastal Management Phone: 843-740-1202 Email: coastal.info@noaa.gov

NOAA contracted with Spencer B. Gross, Inc. (SBG) to obtain airborne Lidar of Willapa Bay, Washington during low tide conditions. The Lidar data was processed to deliver topographic surface elevation data of the exposed intertidal flats and surrounding terrestrial areas. Original contact information: Contact Org: NOAA Office for Coastal Management Phone: 843-740-1202 Email: coastal.info@noaa.gov