This subset of the USGS Water Boundary Dataset contains the polygons of the 50 8-digit Hydrologic Units that comprise the greater Central Valley study site. The Watershed Boundary Dataset is a comprehensive set of digital spatial data that represents the surface drainages areas of the United States. The information included with the features includes a feature date, a unique common identifier, name, the feature length or area, and other characteristics. Names and their identifiers are assigned from the Geographic Names Information System. The data also contains relations that encode metadata. The names and definitions of all these feature attributes are in the Federal Standards and Procedures for the National Watershed Boundary Dataset (WBD). The document is available online at https://pubs.usgs.gov/tm/11/a3/

,

This data set includes 28 physical watershed attributes for each of 135,118 stream segments (National Hydrodraphy Dataset, Version 1) in California. These data were used to support a report entitled: "Classification of California streams using combined deductive and inductive approaches: setting the foundation for analysis of hydrologic alteration" authored by Pyne, Carlisle, Konrad, and Stein, and published in the journal Ecohydrology. Specifically, these data were used in a classification (ie, cluster) analysis to identify unique groupings of watersheds with similar hydrological characteristics.

This data set includes 28 physical watershed attributes for each of 135,118 stream segments (National Hydrodraphy Dataset, Version 1) in California. These data were used to support a report entitled: "Classification of California streams using combined deductive and inductive approaches: setting the foundation for analysis of hydrologic alteration" authored by Pyne, Carlisle, Konrad, and Stein, and published in the journal Ecohydrology. Specifically, these data were used in a classification (ie, cluster) analysis to identify unique groupings of watersheds with similar hydrological characteristics.

This dataset is the digital hydrologic unit boundary layer for the 8-digit subwatershed boundaries for the conterminous United States. This dataset is intended to be used with the following two tabular dBase files: https://water.usgs.gov/lookup/getspatial?ds573_tillage_lu92e and https://water.usgs.gov/lookup/getspatial?ds573_tillage_lu01. The two tabular datasets contain the Tillage Practices in the Conterminous United States, 1989-2004---Datasets Aggregated by Watershed. This dataset and the two tabular datasets can be linked using the common attribute HUC8_N. Information about how the tabular data and geospatial data can be related are given in the data series report: https://pubs.usgs.gov/ds/ds573/ .The original dataset is the 12-digit Subwatershed boundaries (WBD_archive_17nov2009_9.2_file). The 12-digit boundaries were dissolved to 8-digit boundaries to be used with the two tabular .dbase data files containing the tillage practice data for the United States. ORIGINAL METADATA: This data set is a complete digital hydrologic unit boundary layer to the Subwatershed (12-digit) 6th level for the entire United States. This data set consists of geo-referenced digital data and associated attributes created in accordance with the "Federal Guidelines, Requirements, and Procedures for the National Watershed Boundary Dataset; Chapter 3 of Section A, Federal Standards, Book 11, Collection and Delineation of Spatial Data; Techniques and Methods 11-A3" (04/01/2009). http://www.ncgc.nrcs.usda.gov/products/datasets/watershed/index.html . Polygons are attributed with hydrologic unit codes for 4th level sub-basins, 5th level watersheds, 6th level subwatersheds, name, size, downstream hydrologic unit, type of watershed, non-contributing areas and flow modification.

This dataset is the digital hydrologic unit boundary layer for the 8-digit subwatershed boundaries for the conterminous United States. This dataset is intended to be used with the following two tabular dBase files: https://water.usgs.gov/lookup/getspatial?ds573_tillage_lu92e and https://water.usgs.gov/lookup/getspatial?ds573_tillage_lu01. The two tabular datasets contain the Tillage Practices in the Conterminous United States, 1989-2004---Datasets Aggregated by Watershed. This dataset and the two tabular datasets can be linked using the common attribute HUC8_N. Information about how the tabular data and geospatial data can be related are given in the data series report: https://pubs.usgs.gov/ds/ds573/ .The original dataset is the 12-digit Subwatershed boundaries (WBD_archive_17nov2009_9.2_file). The 12-digit boundaries were dissolved to 8-digit boundaries to be used with the two tabular .dbase data files containing the tillage practice data for the United States. ORIGINAL METADATA: This data set is a complete digital hydrologic unit boundary layer to the Subwatershed (12-digit) 6th level for the entire United States. This data set consists of geo-referenced digital data and associated attributes created in accordance with the "Federal Guidelines, Requirements, and Procedures for the National Watershed Boundary Dataset; Chapter 3 of Section A, Federal Standards, Book 11, Collection and Delineation of Spatial Data; Techniques and Methods 11-A3" (04/01/2009). http://www.ncgc.nrcs.usda.gov/products/datasets/watershed/index.html . Polygons are attributed with hydrologic unit codes for 4th level sub-basins, 5th level watersheds, 6th level subwatersheds, name, size, downstream hydrologic unit, type of watershed, non-contributing areas and flow modification.

The Watershed Boundary Dataset (WBD) is a comprehensive aggregated collection of hydrologic unit data consistent with the national criteria for delineation and resolution. It defines the areal extent of surface water drainage to a point except in coastal or lake front areas where there could be multiple outlets as stated by the "Federal Standards and Procedures for the National Watershed Boundary Dataset (WBD)" "Standard" (https://pubs.usgs.gov/tm/11/a3/). Watershed boundaries are determined solely upon science-based hydrologic principles, not favoring any administrative boundaries or special projects, nor particular program or agency. This dataset represents the hydrologic unit boundaries to the 12-digit for the entire United States. Some areas may also include additional subdivisions representing the 14- and 16-digit hydrologic unit (HU). At a minimum, the HUs are delineated at 1:24,000-scale in the conterminous United States, 1:25,000-scale in Hawaii, Pacific basin and the Caribbean, and 1:63,360-scale in Alaska, meeting the National Map Accuracy Standards (NMAS). Higher resolution boundaries are being developed where partners and data exist and will be incorporated back into the WBD. WBD data are delivered as a dataset of polygons and corresponding lines that define the boundary of the polygon. WBD polygon attributes include hydrologic unit codes (HUC), size (in the form of acres and square kilometers), name, downstream hydrologic unit code, type of watershed, non-contributing areas, and flow modifications. The HUC describes where the unit is in the country and the level of the unit. WBD line attributes contain the highest level of hydrologic unit for each boundary, line source information and flow modifications. For additional information on NHD, go to https://www.usgs.gov/national-hydrography.

The U.S. Geological Survey (USGS) entered into a cooperative study with the California Department of Water Resources and the Ramona Band of Cahuilla to characterize the hydrogeology of the Cahuilla Valley and Terwilliger Valley groundwater basins and surrounding water-bearing units, with the ultimate goal of developing a calibrated integrated hydrologic model to manage the groundwater supplies on a sustainable basis. A three-dimensional geologic framework model (GFM) was developed to quantify the structural geometry and distribution of water-bearing units in the groundwater basins, using borehole lithology and hydraulic information, geologic maps, and gravity-derived depth-to-basement information. This dataset includes (1) tabular data of selected boreholes with their location and construction information, (2) borehole lithology information, (3) a geographic information systems (GIS) shapefile of a cellular array containing interpolated elevations and thicknesses of modeled geologic units from the GFM in the format of a polygon feature class, (4) and a table of summary textural classes for the alluvial fill unit from borehole logs and summary textural classes used in geologic framework model.

This data set is a complete digital hydrologic unit boundary layer to the watershed (10-digit) 10th level for the State of New Mexico. This data set consists of geo-referenced digital data and associated attributes created in accordance with the "FGDC Proposal, Version 1.0 - Federal Standards For Delineation of Hydrologic Unit Boundaries 3/01/02"(http://www.ftw.nrcs.usda.gov/huc_data.html). Polygons are attributed with hydrologic unit codes for 4th level sub-basins, 5th level watersheds, 6th level subwatersheds, name, size, downstream hydrologic unit, type of watershed, non-contributing areas and flow modification. Arcs are attributed with the highest hydrologic unit code for each watershed, linesource and a metadata reference file.

Dataset contains contours at 10-foot intervals, spillway crest contour, and dam crest contour of the Calaveras Reservoir, California, based on the bathymetric survey completed in December 2019. Files are provided as geospatial shapefiles and CAD (.dwg file extension) files. Methodology is described in detail in a previous report of a similar reservoir survey project for the cooperator at a separate reservoir: Marineau, M.D., Wright, S.A, and Lopez, J.V., 2020, Storage capacity and sedimentation characteristics of the San Antonio Reservoir, California, 2018: U.S. Geological Survey Scientific Investigations Report 2019–5151, 34 p., https://doi.org/10.3133/sir20195151