The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. A geodatabase containing various feature-class layers and tables shows the locations of vegetation types and general land cover (vegetation map), vegetation plot samples, verification sites, AA sites, project boundary extent, and aerial photographic centers. The feature-class layer and relate tables for the CUVA vegetation map provides 4,640 polygons of detailed attribute data covering 13,288.4 ha, with an average polygon size of 2.9 ha. Summary reports generated from the vegetation map layer show map classes representing natural/semi-natural types in the NVCS apply to 4,151 polygons (89.4% of polygons) and cover 11,225.0 ha (84.5%) of the map extent. Of these polygons, the map layer shows CUVA to be 74.4% forest (9,888.8 ha), 2.5% shrubland (329.7 ha), and 7.6% herbaceous vegetation cover (1,006.5 ha). Map classes representing cultural types in the NVCS apply to 435 polygons (9.4% of polygons) and cover 1,825.7 ha (13.7%) of the map extent. Map classes representing non-NVCS units (open water) apply to 54 polygons (1.2% of polygons) and cover 237.7 ha (1.8%) of the map extent.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. The mapping component of the BRCA project used a combination of methods to interpret and delineate vegetation and land use polygons. The USGS applied an electronic segmentation method (e-Cognition software) to create preliminary linework on features with high-contrast photo-signatures. Using the preliminary linework as a baseline starting point, the primary photointerpreter drew polygons directly on screen through heads-up digitizing using ArcGIS editing tools. Additionally, trained photointerpreters assisting the primary photointerpreter drew polygons on Mylar overlays covering 1m resolution, 1:12,000-scale, 9 x 9-inch true-color aerial photographs. This process enabled the photointerpreters to view the landscape in stereo in order to identify finer details. The linework drawn on Mylar overlays was then transferred into digital media by heads-up digitizing using ArcGIS software. The park and environs were interpreted and mapped to the same level of detail.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. The mapping component of the BRCA project used a combination of methods to interpret and delineate vegetation and land use polygons. The USGS applied an electronic segmentation method (e-Cognition software) to create preliminary linework on features with high-contrast photo-signatures. Using the preliminary linework as a baseline starting point, the primary photointerpreter drew polygons directly on screen through heads-up digitizing using ArcGIS editing tools. Additionally, trained photointerpreters assisting the primary photointerpreter drew polygons on Mylar overlays covering 1m resolution, 1:12,000-scale, 9 x 9-inch true-color aerial photographs. This process enabled the photointerpreters to view the landscape in stereo in order to identify finer details. The linework drawn on Mylar overlays was then transferred into digital media by heads-up digitizing using ArcGIS software. The park and environs were interpreted and mapped to the same level of detail.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. Vegetation and land use were interpreted to as detailed a level possible from high-resolution, 9” x 9” stereo pairs of 1:12,000-scale true color aerial photography. Polygons representing vegetation or land use map classes were delineated directly on-screen through heads-up digitizing using ArcGIS editing tools and transferred to a spatial database. The project used the program standard minimum mapping unit of 0.5 ha with few exceptions. Fifty-four map classes represented by 31,497 polygons were developed for CANY. A total of 30,329 polygons represent 41 natural or semi-natural vegetation map classes covering 94.8% of the mapping project area. One map class was documented as point locations only. Twelve additional land use/land cover and geologic map classes describe 1,168 polygons (3.7% of polygons and 5.2% of the area). Average polygon size across all map classes is 9.9 ha (24.4 acres). Lands within CANY make up 135,204 ha (334,096 acres) or 79.2% of the total project area. Blackbrush Shrubland had the highest number of polygons (3600) polygons covering 9.4% of the mapping area. The Potholed and Jointed Sandstone Woodland Complex is the most common map class, delineated on 30,495 ha (75,354 acres) or 17.9% of the project area.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. Vegetation and land use were interpreted to as detailed a level possible from high-resolution, 9” x 9” stereo pairs of 1:12,000-scale true color aerial photography. Polygons representing vegetation or land use map classes were delineated directly on-screen through heads-up digitizing using ArcGIS editing tools and transferred to a spatial database. The project used the program standard minimum mapping unit of 0.5 ha with few exceptions. Fifty-four map classes represented by 31,497 polygons were developed for CANY. A total of 30,329 polygons represent 41 natural or semi-natural vegetation map classes covering 94.8% of the mapping project area. One map class was documented as point locations only. Twelve additional land use/land cover and geologic map classes describe 1,168 polygons (3.7% of polygons and 5.2% of the area). Average polygon size across all map classes is 9.9 ha (24.4 acres). Lands within CANY make up 135,204 ha (334,096 acres) or 79.2% of the total project area. Blackbrush Shrubland had the highest number of polygons (3600) polygons covering 9.4% of the mapping area. The Potholed and Jointed Sandstone Woodland Complex is the most common map class, delineated on 30,495 ha (75,354 acres) or 17.9% of the project area.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. Following the vegetation plot data analysis, the preliminary vegetation map was edited and refined to produce a revised preliminary vegetation map prior to thematic accuracy assessment (AA). Using ArcMap 9.2 (ESRI 1999-2006), polygon boundaries were revised on-screen using the newly acquired aerial orthophotography (digital photomosaic) based on the classification plot data, field observations, classification analyses, aerial photography signatures, and topographic maps. Each polygon was assigned the USNVC Community Element Global (CEGL) code of a preliminary vegetation association based on the information sources listed above. Second, third, and fourth CEGL code choices were entered in cases of uncertainty, or for polygons representing mosaics of two or more vegetation types.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. Following the vegetation plot data analysis, the preliminary vegetation map was edited and refined to produce a revised preliminary vegetation map prior to thematic accuracy assessment (AA). Using ArcMap 9.2 (ESRI 1999-2006), polygon boundaries were revised on-screen using the newly acquired aerial orthophotography (digital photomosaic) based on the classification plot data, field observations, classification analyses, aerial photography signatures, and topographic maps. Each polygon was assigned the USNVC Community Element Global (CEGL) code of a preliminary vegetation association based on the information sources listed above. Second, third, and fourth CEGL code choices were entered in cases of uncertainty, or for polygons representing mosaics of two or more vegetation types.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. The designated base was the USGS digital orthophoto quarter quads (DOQQ’s) series for the Wateree and Gadsden 7.5 minute quadrangles. Creation of the DOQQ’s required having the image plotted onto clear mylar at the mapping input scale, approximately 1:12,000. To facilitate the geo referencing of the polygons, it was determined that the average (nominal) scale of the aerial photography was also approximately 1:12,000. Seven plots were generated at the normal scale on mylar overlays to cover the entire Monument and its environs.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. The designated base was the USGS digital orthophoto quarter quads (DOQQ’s) series for the Wateree and Gadsden 7.5 minute quadrangles. Creation of the DOQQ’s required having the image plotted onto clear mylar at the mapping input scale, approximately 1:12,000. To facilitate the geo referencing of the polygons, it was determined that the average (nominal) scale of the aerial photography was also approximately 1:12,000. Seven plots were generated at the normal scale on mylar overlays to cover the entire Monument and its environs.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. October 29, 1996: Aerial photography for Rock Creek Park is flown February 25, 1997: Initial meeting at Rock Creek Park headquarters - acquisition of aerial photography and ancillary data including existing vegetation maps March - April 1997: First cut delineations onto aerial photography of the photo signatures (see Figure 3 - Rock Creek Park Photo Index). May 12 - 16, 1997: Photointerpretation field reconnaissance trip, TNC training of park biologists in field sampling methodology May - June 1997: Develop initial list of photo signature types, Revise initial delineations based on field reconnaissance findings, Label existing polygons with photo signature types, Deliver copies of overlays to park biologists for plot selection and feedback June - September 1997: Park vegetation sampling effort February 19, 1998: Received draft TNC report of the vegetation classification for Rock Creek March 1998: Received final TNC report on the vegetation classification for Rock Creek, Received plot data and locations for vegetation sampling effort, Received TNC key for communities, Development of PI signature / TNC community lookup table, Polygons attributized with initial communities April 1998: Received DOQQ files (April 1989) May 11-12, 1998: Photointerpretation field verification trip May 1998: Revise photo signature / TNC community lookup table, Update and correct PI community calls and PI linework June - October 1998: Data rectification and conversion, Interim files and plots delivered to NPS-ROCR, Final documentation