,Field-based, partial life table data for immature stages of silverleaf whitefly, Bemisia argentifolii, on 6 host plants including alfalfa, broccoli, spring and fall cantaloupe, cotton, ornamental lantana, and several species of annual weeds in Maricopa, Marana and Yuma Arizona, USA. Data were collected on a total of 73 individual cohorts (each replicated 4 times) from November 2000 to April 2003 at all three study sites. For each cohort, data were generated on approximately 400 individual insects (200 eggs and 200 first instar nymphs). Data provide the marginal, cause-specific mortality for eggs, and 1st, 2nd, 3rd, and 4th instar nymphs collectively and stage-specific marginal mortality for each stage over all causes. Mortality was characterized as caused by inviability (eggs only), dislodgement, predation, parasitism (nymphs only), desiccation, and unknown. Detailed methods can be found in Naranjo and Ellsworth 2005 (Entomologia Experimentalis et Applicata 116(2): 93-108; https://doi.org/10.1111/j.1570-7458.2005.00297.x ; and Naranjo and Ellsworth 2017 (Journal of Visualized Experiments, 129; https://doi.org/10.3791/56150). The method takes advantage of the sessile nature of immature stages of this insect. Briefly, an observer follows individual eggs or settled first instar nymphs from natural populations on the underside of host plant leaves in the field with a hand lens and determines causes of death for each individual over time. Weather data was monitored using the University of Arizona AzMet system. Note that these life table data do not include adult mortality or reproduction. The life table data were used to generate survivorship curves for each cohort on each host plant based on a physiological time scale of accumulated degree-days above 10C from the initiation of each cohort.,,

We developed habitat suitability models for four invasive plant species of concern to Department of Interior land management agencies. We generally followed the modeling workflow developed in Young et al. 2020, but developed models both for two data types, where species were present and where they were abundant. We developed models using five algorithms with VisTrails: Software for Assisted Habitat Modeling [SAHM 2.1.2]. We accounted for uncertainty related to sampling bias by using two alternative sources of background samples, and constructed model ensembles using the 10 models for each species (five algorithms by two background methods) for four different thresholds. This data bundle contains the presence and abundance merged data sets to create models for medusahead rye, red brome, venanata and bur buttercup, the eight raster files associated with each species/ data type (presence or abundance), and tabular summaries by management unit (including each species/ data type combination). The spatial data are organized in a separate folder for each species, each containing four rasters. Each of the rasters represent the following, with an occurrence (occ) and abundance (abund) version: 1) 1st - one percentile threshold 2) 1st_masked - one percentile threshold with Restricted Environmental Conditions The bundle documentation files are: 1) 'AbundOccur.xml' (this file) which contains the project-level metadata 2) 'mergedDataset.csv' contains the merged data set used to create the models, including location and environmental data. 3) XX.tif where XX is the raster type explained above (occ or abund; masked or not). 4) managementSummaries.csv is the tabular summaries by management unit.

We developed habitat suitability models for four invasive plant species of concern to Department of Interior land management agencies. We generally followed the modeling workflow developed in Young et al. 2020, but developed models both for two data types, where species were present and where they were abundant. We developed models using five algorithms with VisTrails: Software for Assisted Habitat Modeling [SAHM 2.1.2]. We accounted for uncertainty related to sampling bias by using two alternative sources of background samples, and constructed model ensembles using the 10 models for each species (five algorithms by two background methods) for four different thresholds. This data bundle contains the presence and abundance merged data sets to create models for medusahead rye, red brome, venanata and bur buttercup, the eight raster files associated with each species/ data type (presence or abundance), and tabular summaries by management unit (including each species/ data type combination). The spatial data are organized in a separate folder for each species, each containing four rasters. Each of the rasters represent the following, with an occurrence (occ) and abundance (abund) version: 1) 1st - one percentile threshold 2) 1st_masked - one percentile threshold with Restricted Environmental Conditions The bundle documentation files are: 1) 'AbundOccur.xml' (this file) which contains the project-level metadata 2) 'mergedDataset.csv' contains the merged data set used to create the models, including location and environmental data. 3) XX.tif where XX is the raster type explained above (occ or abund; masked or not). 4) managementSummaries.csv is the tabular summaries by management unit.

We developed habitat suitability models for four invasive plant species of concern to Department of Interior land management agencies. We generally followed the modeling workflow developed in Young et al. 2020, but developed models both for two data types, where species were present and where they were abundant. We developed models using five algorithms with VisTrails: Software for Assisted Habitat Modeling [SAHM 2.1.2]. We accounted for uncertainty related to sampling bias by using two alternative sources of background samples, and constructed model ensembles using the 10 models for each species (five algorithms by two background methods) for four different thresholds. This data bundle contains the presence and abundance merged data sets to create models for medusahead rye, red brome, venanata and bur buttercup, the eight raster files associated with each species/ data type (presence or abundance), and tabular summaries by management unit (including each species/ data type combination). The spatial data are organized in a separate folder for each species, each containing four rasters. Each of the rasters represent the following, with an occurrence (occ) and abundance (abund) version: 1) 1st - one percentile threshold 2) 1st_masked - one percentile threshold with Restricted Environmental Conditions The bundle documentation files are: 1) 'AbundOccur.xml' (this file) which contains the project-level metadata 2) 'mergedDataset.csv' contains the merged data set used to create the models, including location and environmental data. 3) XX.tif where XX is the raster type explained above (occ or abund; masked or not). 4) managementSummaries.csv is the tabular summaries by management unit.

We developed habitat suitability models for four invasive plant species of concern to Department of Interior land management agencies. We generally followed the modeling workflow developed in Young et al. 2020, but developed models both for two data types, where species were present and where they were abundant. We developed models using five algorithms with VisTrails: Software for Assisted Habitat Modeling [SAHM 2.1.2]. We accounted for uncertainty related to sampling bias by using two alternative sources of background samples, and constructed model ensembles using the 10 models for each species (five algorithms by two background methods) for four different thresholds. This data bundle contains the presence and abundance merged data sets to create models for medusahead rye, red brome, venanata and bur buttercup, the eight raster files associated with each species/ data type (presence or abundance), and tabular summaries by management unit (including each species/ data type combination). The spatial data are organized in a separate folder for each species, each containing four rasters. Each of the rasters represent the following, with an occurrence (occ) and abundance (abund) version: 1) 1st - one percentile threshold 2) 1st_masked - one percentile threshold with Restricted Environmental Conditions The bundle documentation files are: 1) 'AbundOccur.xml' contains FGDC project-level metadata 2) 'mergedDataset.csv', contains the merged data set used to create the models, including location and environmental data. 3) XX.tif where XX is the raster type explained above (occ or abund; masked or not). 4) managementSummaries.csv, which this metadata file specifically describes, is the tabular summaries by management unit.

We developed habitat suitability models for four invasive plant species of concern to Department of Interior land management agencies. We generally followed the modeling workflow developed in Young et al. 2020, but developed models both for two data types, where species were present and where they were abundant. We developed models using five algorithms with VisTrails: Software for Assisted Habitat Modeling [SAHM 2.1.2]. We accounted for uncertainty related to sampling bias by using two alternative sources of background samples, and constructed model ensembles using the 10 models for each species (five algorithms by two background methods) for four different thresholds. This data bundle contains the presence and abundance merged data sets to create models for medusahead rye, red brome, venanata and bur buttercup, the eight raster files associated with each species/ data type (presence or abundance), and tabular summaries by management unit (including each species/ data type combination). The spatial data are organized in a separate folder for each species, each containing four rasters. Each of the rasters represent the following, with an occurrence (occ) and abundance (abund) version: 1) 1st - one percentile threshold 2) 1st_masked - one percentile threshold with Restricted Environmental Conditions The bundle documentation files are: 1) 'AbundOccur.xml' contains FGDC project-level metadata 2) 'mergedDataset.csv', contains the merged data set used to create the models, including location and environmental data. 3) XX.tif where XX is the raster type explained above (occ or abund; masked or not). 4) managementSummaries.csv, which this metadata file specifically describes, is the tabular summaries by management unit.

These are the data used in the manuscript "Unusual success, future uncertainty, and science needs for adaptive management of invasive plants in a US national park." The data were collected from 1988-2022. IPM_species_data.csv contains the hours spent and herbicide amounts used for a subset of managed species, and IPM_summary_data.csv contains the total number of species managed, number of sites, hours spent, and herbicide amounts used.

These are the data used in the manuscript "Unusual success, future uncertainty, and science needs for adaptive management of invasive plants in a US national park." The data were collected from 1988-2022. IPM_species_data.csv contains the hours spent and herbicide amounts used for a subset of managed species, and IPM_summary_data.csv contains the total number of species managed, number of sites, hours spent, and herbicide amounts used.

We developed habitat suitability models for four invasive plant species of concern to Department of Interior land management agencies. We generally followed the modeling workflow developed in Young et al. 2020, but developed models both for two data types, where species were present and where they were abundant. We developed models using five algorithms with VisTrails: Software for Assisted Habitat Modeling [SAHM 2.1.2]. We accounted for uncertainty related to sampling bias by using two alternative sources of background samples, and constructed model ensembles using the 10 models for each species (five algorithms by two background methods) for four different thresholds. This data bundle contains the presence and abundance merged data sets to create models for medusahead rye, red brome, venanata and bur buttercup, the eight raster files associated with each species/ data type (presence or abundance), and tabular summaries by management unit (including each species/ data type combination). The spatial data are organized in a separate folder for each species, each containing four rasters. Each of the rasters represent the following, with an occurrence (occ) and abundance (abund) version: 1) 1st - one percentile threshold 2) 1st_masked - one percentile threshold with Restricted Environmental Conditions This file specifically, 2) 'mergedDataset.csv', contains the merged data set used to create the models, including location coordinates and associated environmental covariate data values. The bundle documentation files are: 1) 'AbundOccur.xml' contains FGDC project-level metadata 2) 'mergedDataset.csv', which this metadata file specifically describes, contains the merged data set used to create the models, including location and environmental data. 3) XX.tif where XX is the raster type explained above (occ or abund; masked or not). 4) managementSummaries.csv is the tabular summaries by management unit.

We developed habitat suitability models for four invasive plant species of concern to Department of Interior land management agencies. We generally followed the modeling workflow developed in Young et al. 2020, but developed models both for two data types, where species were present and where they were abundant. We developed models using five algorithms with VisTrails: Software for Assisted Habitat Modeling [SAHM 2.1.2]. We accounted for uncertainty related to sampling bias by using two alternative sources of background samples, and constructed model ensembles using the 10 models for each species (five algorithms by two background methods) for four different thresholds. This data bundle contains the presence and abundance merged data sets to create models for medusahead rye, red brome, venanata and bur buttercup, the eight raster files associated with each species/ data type (presence or abundance), and tabular summaries by management unit (including each species/ data type combination). The spatial data are organized in a separate folder for each species, each containing four rasters. Each of the rasters represent the following, with an occurrence (occ) and abundance (abund) version: 1) 1st - one percentile threshold 2) 1st_masked - one percentile threshold with Restricted Environmental Conditions This file specifically, 2) 'mergedDataset.csv', contains the merged data set used to create the models, including location coordinates and associated environmental covariate data values. The bundle documentation files are: 1) 'AbundOccur.xml' contains FGDC project-level metadata 2) 'mergedDataset.csv', which this metadata file specifically describes, contains the merged data set used to create the models, including location and environmental data. 3) XX.tif where XX is the raster type explained above (occ or abund; masked or not). 4) managementSummaries.csv is the tabular summaries by management unit.