The Conductivity, Temperature and Depth (CTD); and bathythermograph (XBT) data were collected as part of Distribution/Abundance of Marine Mammals in Gulf of Mexico (GULFCET I) funded by grant no MMS 14-35-0001-30619. The data was collected over two year period spanning from April 15, 1992 to December 12, 1993. Data from 239 casts of CTD and 566 XBT drops was submitted via internet by Dr. Giulietta Fargion of Texas A&M University, Galveston, TX.

The Conductivity, Temperature and Depth (CTD); and bathythermograph (XBT) data were collected as part of Distribution/Abundance of Marine Mammals in Gulf of Mexico (GULFCET I) funded by grant no MMS 14-35-0001-30619. The data was collected over two year period spanning from April 22, 1992 to June 21, 1994. Data from 345 casts of CTD and 244 XBT drops was submitted via internet by Dr. Giulietta Fargion of Texas A&M University, College Station, TX.

This dataset contains XBT data collected from the J.M. GILLIS in the Gulf of Mexico from 1972-06-04 to 1972-06-16 and submitted by Rosenstiel School of Marine and Atmospheric Science, University of Miami. The data has been converted and is now available on line in C116 file format of NODC. The data type C116 contained temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data record was comprised of pairs of temperature-depth values. The XBT data files contained temperature values at non-uniform depths. These depths were recorded at the minimum number of points ("inflection points") required to accurately define the temperature curve. Standard XBTs can obtain profiles to depths of either 450 or 760 m. With special instruments, measurements can be obtained to 1830 m.

Marine toxic substance and other data was collected in the Gulf of Mexico between 1975 and 1978. The data is available in the F144 format of NODC for Marine Toxic Substances and other formats. The F144 format contains data on ambient concentrations of toxic substances and other pollutants in the marine environment. The data derive from laboratory analyses of samples of water, sediment, or marine organisms. Samples may have been collected near marine discharge sites or during ocean monitoring surveys of large areas. Field observations of tar deposits on beaches may also be reported. Survey information includes platform type, start and end dates, and investigator and institution. If data are collected near a discharge site, discharge location, depth, distance to shore, average volume, and other characteristics are reported. Position, date, time and environmental conditions are reported for each sample station. Environmental data may include meteorological and sea surface conditions, tide stage and height, depth of the thermocline or mixed layer surface temperature and salinity, and wave height and periods. Sample characteristics, collection methods, and laboratory techniques are reported for each sample collected and analyzed. The data record comprises concentration values (or a code to indicate trace amounts) for each chemical substance analyzed. Chemical substances are identified by codes based on the registry numbers assigned by the Chemical Abstracts Service (CAS) of the American Chemical Society. Marine organisms from which samples have been taken are identified using the 12-digit NODC Taxonomic Code. A text record is available for optional comments.

The Conductivity, Temperature and Depth (CTD) and Water Depth and Temperature Bathythermograph (XBT) data were collected in Gulf of Mexico as part of Texas Institutions Gulf Ecosystem Research (TIGER) project funded by grant no MMS # 14-35-0001-30501. Data was collected from Ship GYRE cruises 92G09, 92G10 and 92G13. The data was collected over a period spanning from September 26, 1992 to October 31, 1992. Data was submitted in two diskettes by Dr. Douglas C. Biggs, Texas A&M University, College Station, TX. The originator's data containing 32 CTD observations; 52 stations and 12,860 records has been processed. CTD data is available in F022-CTD-Hi Resolution file format of NODC. The originator's bathythermograph (XBT) data has been converted and are now available on line in C116 (XBT) file format of NODC. The F022 format contains high-resolution data collected using CTD (conductivity-temperature-depth) and STD (salinity-temperature-depth) instruments. As they are lowered and raised in the oceans, these electronic devices provide nearly continuous profiles of temperature, salinity, and other parameters. Data values may be subject to averaging or filtering or obtained by interpolation and may be reported at depth intervals as fine as 1m. Cruise and instrument information, position, date, time and sampling interval are reported for each station. Environmental data at the time of the cast (meteorological and sea surface conditions) may also be reported. The data record comprises values of temperature, salinity or conductivity, density (computed sigma-t), and possibly dissolved oxygen or transmissivity at specified depth or pressure levels. Data may be reported at either equally or unequally spaced depth or pressure intervals. A text record is available for comments. The C116/C118 format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data record was comprised of pairs of temperature-depth values. Unlike the MBT Data File, in which temperature values were recorded at uniform 5 m intervals, the XBT data files contained temperature values at non-uniform depths. These depths were recorded at the minimum number of points ("inflection points") required to accurately define the temperature curve. Standard XBTs can obtain profiles to depths of either 450 or 760 m. With special instruments, measurements can be obtained to 1830 m. Prior to July 1994, XBT data were routinely processed to one of these standard types. XBT data are now processed and loaded directly in to the NODC Ocean Profile Data Base (OPDB). Historic data from these two data types were loaded into the OPDB.

Current direction, zooplankton, and other data were collected using moored current meter casts and other instruments in the Gulf of Mexico from December 12, 1975 to May 20, 1980. Data were submitted by National Marine Fisheries Service as part of the Buccaneer Oil Field project. Data has been processed by NODC to the standard NODC standard F005- Current Meter Data, C100- Oceanographic Station Data, and F124- Zooplankton formats. The F005 format is used for time series measurements of ocean currents obtained using moored current-measuring instruments, principally Aanderaa current meters (manufactured by Aanderaa Instruments Inc.). These data represent the Eulerian method of current measurement, i.e., the meters are deployed at a fixed mooring point and measure flow past the sensor. Position, water depth, and sensor depth are reported for each station. The data record comprises values of current direction and speed at specified date and time. Data values may be subject to averaging or filtering and are typically reported at 10-15 minute time intervals. Other environmental parameters may also be reported. These include: water temperature, salinity, conductivity, and transmissivity; wind direction and speed; and dominant wave direction, height, and period. A text field is available for optional comments. The Oceanographic Station Data format contains physical-chemical oceanographic data recorded at discrete depth levels. Most of the observations were made using multi-bottle Nansen casts or other types of water samplers. A small amount (about 5 percent) were obtained using electronic CTD (conductivity-temperature-depth) or STD (salinity-temperature-depth) recorders. The CTD/STD data were reported to NODC at depth levels equivalent to Nansen cast data, however, and have been processed and stored the same as the Nansen data. Cruise information (e.g., ship, country, institution), position, date, and time, and reported for each station. The principal measured parameters are temperature and salinity, but dissolved oxygen, phosphate, total phosphorus, silicate, nitrate, nitrite, and pH may be reported. Meteorological conditions at the time of the cast (e.g., air temperature and pressure, wind, waves) may also be reported, as well as auxiliary data such as water color (Forel-Ule scale), water transparency (Secchi disk depth), and depth to bottom. Values of density (sigma-t) sound velocity, and dynamic depth anomaly are computed from measured parameters. Each station contains the measurements taken at the observed depth levels, but also includes data values interpolated to a set of standard depth levels. The F124 format is used for data from sampling and analysis of marine zooplankton. Information on zooplankton abundance, distribution, and productivity derived from these data support studies of marine populations and ecosystems. Data reported may include: cruise information, position, date, and time of sampling; bottom depth, sampling depths, temperature, and salinity; gear type, volume of water filtered, total dry and wet weight, and other data for total haul; and data for subsamples by species. Data on zooplankton catch by species may include subsample size, zooplankton concentration, life history code, and numbers of adults, juveniles, eggs, and larvae. Estimated density of holoplankton and meroplankton and data on ichthyoplankton may also be reported. A text record is available for comments. Note: there are two options for reporting subsample counts of individuals at different life history stages. If life history codes are used, only number of adults should be reported on that record. Additional separate records should then be used to report number of juveniles and so on. Alternatively, life history codes may not be used and number of adults, juveniles, and so entered in the proper fields of a single record.

Marine chemistry, fish / shell-fish surveys, benthic organisms, and marine toxic substances and pollutants data were collected using current meter and other instruments from J.W. POWELL and other platforms in the Gulf of Mexico. Data were collected from 26 January 1993 to 13 June 1994. Data were submitted by Dr. Gary Wolf of Texas A&M University with support from the Gulf of Mexico Offshore Operations Monitoring Experiment (GOOMEX). Data has been processed by NODC to the NODC standard F069 (Marine Chemistry), F123 (Fish/Shell-fish Surveys), F132 (Benthic Organisms), and F144 (Marine Toxic Substances and Pollutants) formats. The F069 format is used for data from chemical analyses of seawater samples. Cruise information, position, date, and time is reported for each station along with sample depth, temperature, salinity, and density (sigma-t). Chemical and biochemical parameters that may be reported include: dissolved oxygen, nitrate, nitrite, ammonia, inorganic phosphate, and silicate; dissolved organic carbon, particulate organic carbon, and particulate organic nitrogen; and apparent oxygen utilization, percent oxygen saturation, adenosine triphosphate, total phaeophytin, total chlorophyll, total suspended matter, total recoverable petroleum hydrocarbons, and total resolved light hydrocarbons. The F123 format is used for data from field sampling of marine fish and shellfish. The data derive from analysis of midwater or bottom tow catches and provide information on population density and distribution. Cruise information, position, date, time, gear type, fishing distance and duration, and number of hauls are reported for each survey. Environmental data may include meteorological conditions, surface and bottom temperature and salinity, and current direction and speed. Bottom trawl or other gear dimensions and characteristics are also reported. Catch statistics (e.g., weight, volume, number of fish per unit volume) may be reported for both total haul and for individual species. Biological characteristics of selected specimens, predator/ prey information (from stomach contents analysis), and growth data may also be included. A text record is available for comments. The F132 contains data from field sampling or surveys of bottom dwelling marine organisms. The data provide information on species abundance, distribution, and biomass; they may have been collected by point sampling (grab or core), by tow (dredge, trawl or net), by photographic surveys, or by other methods. Cruise information such as vessel, start and end dates, investigator, and institution/agency; station numbers, positions and times; and equipment and methods are reported for each survey. Environmental data reported at each sampling site may include meteorological and sea surface conditions; surface and bottom temperature, salinity and dissolved oxygen; and sediment characteristics. Number of individual organisms and total weight of organisms is reported for each species. A text record is available for comments. The F144 contains data on ambient concentrations of toxic substances and other pollutants in the marine environment. The data derive from laboratory analyses of samples of water, sediment, or marine organisms. Samples may have been collected near marine discharge sites or during ocean monitoring surveys of large areas. Field observations of tar deposits on beaches may also be reported. Survey information includes platform type, start and end dates, and investigator and institution. If data are collected near a discharge site, discharge location, depth, distance to shore, average volume, and other characteristics are reported. Position, date, time and environmental conditions are reported for each sample station. Environmental data may include meteorological and sea surface conditions, tide stage and height, depth of the thermocline or mixed layer surface temperature and salinity, and wave height and periods. Sample characteristics, collection methods, and