The Conductivity, Temperature and Depth (CTD); and bathythermograph (XBT) data were collected as part of Distribution/Abundance of Marine Mammals in Gulf of Mexico (GULFCET I) funded by grant no MMS 14-35-0001-30619. The data was collected over two year period spanning from April 22, 1992 to June 21, 1994. Data from 345 casts of CTD and 244 XBT drops was submitted via internet by Dr. Giulietta Fargion of Texas A&M University, College Station, TX.

The Conductivity, Temperature and Depth (CTD) and Water Depth and Temperature Bathythermograph (XBT) data were collected in Gulf of Mexico as part of Texas Institutions Gulf Ecosystem Research (TIGER) project funded by grant no MMS # 14-35-0001-30501. Data was collected from Ship GYRE cruises 92G09, 92G10 and 92G13. The data was collected over a period spanning from September 26, 1992 to October 31, 1992. Data was submitted in two diskettes by Dr. Douglas C. Biggs, Texas A&M University, College Station, TX. The originator's data containing 32 CTD observations; 52 stations and 12,860 records has been processed. CTD data is available in F022-CTD-Hi Resolution file format of NODC. The originator's bathythermograph (XBT) data has been converted and are now available on line in C116 (XBT) file format of NODC. The F022 format contains high-resolution data collected using CTD (conductivity-temperature-depth) and STD (salinity-temperature-depth) instruments. As they are lowered and raised in the oceans, these electronic devices provide nearly continuous profiles of temperature, salinity, and other parameters. Data values may be subject to averaging or filtering or obtained by interpolation and may be reported at depth intervals as fine as 1m. Cruise and instrument information, position, date, time and sampling interval are reported for each station. Environmental data at the time of the cast (meteorological and sea surface conditions) may also be reported. The data record comprises values of temperature, salinity or conductivity, density (computed sigma-t), and possibly dissolved oxygen or transmissivity at specified depth or pressure levels. Data may be reported at either equally or unequally spaced depth or pressure intervals. A text record is available for comments. The C116/C118 format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data record was comprised of pairs of temperature-depth values. Unlike the MBT Data File, in which temperature values were recorded at uniform 5 m intervals, the XBT data files contained temperature values at non-uniform depths. These depths were recorded at the minimum number of points ("inflection points") required to accurately define the temperature curve. Standard XBTs can obtain profiles to depths of either 450 or 760 m. With special instruments, measurements can be obtained to 1830 m. Prior to July 1994, XBT data were routinely processed to one of these standard types. XBT data are now processed and loaded directly in to the NODC Ocean Profile Data Base (OPDB). Historic data from these two data types were loaded into the OPDB.

CTD, marine invertebrate pathology, benthic organisms, and marine toxic substances and pollutants data were collected using CTD, net casts, and other instruments from the SEA TRANSPORTER and other platforms in the Gulf of Mexico. Data were collected from 20 May 1978 to 15 January 1979. Data were submitted by the South West Research Institute in Houston with support from the Ocean Continental Shelf (OCS). The F022 format contains high-resolution data collected using CTD (conductivity-temperature-depth) and STD (salinity-temperature-depth) instruments. As they are lowered and raised in the oceans, these electronic devices provide nearly continuous profiles of temperature, salinity, and other parameters. Data values may be subject to averaging or filtering or obtained by interpolation and may be reported at depth intervals as fine as 1m. Cruise and instrument information, position, date, time and sampling interval are reported for each station. Environmental data at the time of the cast (meteorological and sea surface conditions) may also be reported. The data record comprises values of temperature, salinity or conductivity, density (computed sigma-t), and possibly dissolved oxygen or transmissivity at specified depth or pressure levels. Data may be reported at either equally or unequally spaced depth or pressure intervals. A text record is available for comments. Marine Invertebrate Pathology (F063) contains data from examinations of diseased marine invertebrates. Although these data maybe from field observations, they derive primarily from laboratory analyses. Data include: catch statistics (e.g., total weight, number of individual, identity of disease and number of diseased individuals) by species for any number of species; and biological condition of selected specimens. The size location, and frequency of lesions may be reported for individual specimens. Specimens are identified by an NODC Taxonomic Code. A text record is available for comments. The F132 contains data from field sampling or surveys of bottom dwelling marine organisms. The data provide information on species abundance, distribution, and biomass; they may have been collected by point sampling (grab or core), by tow (dredge, trawl or net), by photographic surveys, or by other methods. Cruise information such as vessel, start and end dates, investigator, and institution/agency; station numbers, positions and times; and equipment and methods are reported for each survey. Environmental data reported at each sampling site may include meteorological and sea surface conditions; surface and bottom temperature, salinity and dissolved oxygen; and sediment characteristics. Number of individual organisms and total weight of organisms is reported for each species. A text record is available for comments. This file contains data on ambient concentrations of toxic substances and other pollutants in the marine environment. The data derive from laboratory analyses of samples of water, sediment, or marine organisms. Samples may have been collected near marine discharge sites or during ocean monitoring surveys of large areas. Field observations of tar deposits on beaches may also be reported. Survey information includes platform type, start and end dates, and investigator and institution. If data are collected near a discharge site, discharge location, depth, distance to shore, average volume, and other characteristics are reported. Position, date, time and environmental conditions are reported for each sample station. Environmental data may include meteorological and sea surface conditions, tide stage and height, depth of the thermocline or mixed layer surface temperature and salinity, and wave height and periods. Sample characteristics, collection methods, and laboratory techniques are reported for each sample collected and analyzed. The data record comprises concentration values (or a code to indicate trace amounts) for each chemical substance analyzed. Chemical substances are

A Minerals Management Service (MMS) program entitled Survey of Deepwater Currents in the Eastern Gulf of Mexico, awarded to Evans-Hamilton, Inc. This data set includes physical oceanographic data from CTD and ADCP moorings deployed in the Eastern Gulf of Mexico from January 19, 2005 to January 28, 2006. The data are in ASCII forms subjected to quality control and quality assurance procedures.

Temperature profile and water depth data were collected using BT and XBT casts from the USCGC FORWARD in the Gulf of Mexico. Data were collected from 11 March 1992 to 01 April 1992 by the US Coast Guard. Data has been processed by NODC to the NODC standard Bathythermograph (XBT) (C116) format. The C116/C118 format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data record was comprised of pairs of temperature-depth values. Unlike the MBT Data File, in which temperature values were recorded at uniform 5 m intervals, the XBT data files contained temperature values at non-uniform depths. These depths were recorded at the minimum number of points ("inflection points") required to accurately define the temperature curve. Standard XBTs can obtain profiles to depths of either 450 or 760 m. With special instruments, measurements can be obtained to 1830 m. Prior to July 1994, XBT data were routinely processed to one of these standard types. XBT data are now processed and loaded directly in to the NODC Ocean Profile Data Base (OPDB). Historic data from these two data types were loaded into the OPDB.

Chemical, current meter, and other data were collected using current meter, bottle, XBT, and CTD casts in the Gulf of Mexico from November 16, 1997 to August 8, 2000. Data were submitted by Texas A&M University as part of the Northeastern Gulf of Mexico Physical Oceanographic Program: Chemical Oceanography and Hydrography Study (NEGOM) project. There were nine cruises, all aboard R/V Gyre. The same 11 cross-shelf lines were occupied during each cruise. On each cruise, profiles of temperature, salinity, dissolved oxygen, fluorescence, backscatterance, PAR, and percent transmission were made with a Seabird CTD. Water samples were taken and analyzed for salinity, dissolved oxygen, nutrients, pigments, particulate material, particulate organic carbon and particulate organic nitrogen. Many XBT probes were released. An underway flow-through system measured near-surface temperature, salinity, and fluorescence. Acoustic Doppler current profilers measured vertical profiles of currents while underway.

Current direction, bathythermograph (xbt), CTD, and other data were collected using moored current meter casts and other instruments in the Gulf of Mexico from June 11, 1985 to September 3, 1986. Data were submitted by Science Applications, INC - Raleigh NC as part of the Gulf of Mexico Physical Oceanography (GMPO) project. Data has been processed by NODC to the NODC standard F015- Current Meter Data, F022- CTD High Resolution, C100- Ocean Station Data, and C116- Bathythermograph XBT formats. The F015 format is used for time series measurements of ocean currents. These data are obtained from current meter moorings and represent Eulerian method of current measurement, i.e., the meters are deployed at a fixed point and measure flow past a sensor. Position, bottom depth, sensor depth, and meter characteristics are reported for each station. The data record comprises values of east-west (u) and north-south (v) current vector components at specified date and time. Current direction is defined as the direction toward which the water is flowing with positive directions east and north and negative directions west and south. Data values may be subject to averaging or filtering and are typically reported at 10-15 minute time intervals. Water temperature, pressure, and conductivity or salinity may also be reported. A text record is available for optional comments. The F022 format contains high-resolution data collected using CTD (conductivity-temperature-depth) and STD (salinity-temperature-depth) instruments. As they are lowered and raised in the oceans, these electronic devices provide nearly continuous profiles of temperature, salinity, and other parameters. Data values may be subject to averaging or filtering or obtained by interpolation and may be reported at depth intervals as fine as 1m. Cruise and instrument information, position, date, time and sampling interval are reported for each station. Environmental data at the time of the cast (meteorological and sea surface conditions) may also be reported. The data record comprises values of temperature, salinity or conductivity, density (computed sigma-t), and possibly dissolved oxygen or transmissivity at specified depth or pressure levels. Data may be reported at either equally or unequally spaced depth or pressure intervals. A text record is available for comments. The Oceanographic Station Data (C100) format contains physical-chemical oceanographic data recorded at discrete depth levels. Most of the observations were made using multi-bottle Nansen casts or other types of water samplers. A small amount (about 5 percent) were obtained using electronic CTD conductivity-temperature-depth) or STD (salinity-temperature-depth) recorders. The CTD/STD data were reported to NODC at depth levels equivalent to Nansen cast data, however, and have been processed and stored the same as the Nansen data. Cruise information (e.g., ship, country, institution), position, date, and time, and reported for each station. The principal measured parameters are temperature and salinity, but dissolved oxygen, phosphate, total phosphorus, silicate, nitrate, nitrite, and pH may be reported. Meteorological conditions at the time of the cast (e.g., air temperature and pressure, wind, waves) may also be reported, as well as auxiliary data such as water color (Forel-Ule scale), water transparency (Secchi disk depth), and depth to bottom. Values of density (sigma-t), sound velocity, and dynamic depth anomaly are computed from measured parameters. Each station contains the measurements taken at the observed depth levels, but also includes data values interpolated to a set of standard depth levels. The C116 format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data record was comprised of pairs of temperature-depth values. Unlike the MBT Data File, in which temperature values were

Current direction, bathythermograph (xbt), CTD, and other data were collected using moored current meter casts and other instruments in the Gulf of Mexico from April 4, 1987 to November 2, 1988. Data were submitted by Science Applications, INC - Raleigh NC as part of the Gulf of Mexico Physical Oceanography (GMPO) project. Data has been processed by NODC to the NODC standard F015- Current Meter Data, F022- CTD High Resolution, C100- Ocean Station Data, and C116/118- Bathythermograph XBT formats. The F015 format is used for time series measurements of ocean currents. These data are obtained from current meter moorings and represent Eulerian method of current measurement, i.e., the meters are deployed at a fixed point and measure flow past a sensor. Position, bottom depth, sensor depth, and meter characteristics are reported for each station. The data record comprises values of east-west (u) and north-south (v) current vector components at specified date and time. Current direction is defined as the direction toward which the water is flowing with positive directions east and north and negative directions west and south. Data values may be subject to averaging or filtering and are typically reported at 10-15 minute time intervals. Water temperature, pressure, and conductivity or salinity may also be reported. A text record is available for optional comments. The F022 format contains high-resolution data collected using CTD (conductivity-temperature-depth) and STD (salinity-temperature-depth) instruments. As they are lowered and raised in the oceans, these electronic devices provide nearly continuous profiles of temperature, salinity, and other parameters. Data values may be subject to averaging or filtering or obtained by interpolation and may be reported at depth intervals as fine as 1m. Cruise and instrument information, position, date, time and sampling interval are reported for each station. Environmental data at the time of the cast (meteorological and sea surface conditions) may also be reported. The data record comprises values of temperature, salinity or conductivity, density (computed sigma-t), and possibly dissolved oxygen or transmissivity at specified depth or pressure levels. Data may be reported at either equally or unequally spaced depth or pressure intervals. A text record is available for comments. The Oceanographic Station Data (C100) format contains physical-chemical oceanographic data recorded at discrete depth levels. Most of the observations were made using multi-bottle Nansen casts or other types of water samplers. A small amount (about 5 percent) were obtained using electronic CTD conductivity-temperature-depth) or STD (salinity-temperature-depth) recorders. The CTD/STD data were reported to NODC at depth levels equivalent to Nansen cast data, however, and have been processed and stored the same as the Nansen data. Cruise information (e.g., ship, country, institution), position, date, and time, and reported for each station. The principal measured parameters are temperature and salinity, but dissolved oxygen, phosphate, total phosphorus, silicate, nitrate, nitrite, and pH may be reported. Meteorological conditions at the time of the cast (e.g., air temperature and pressure, wind, waves) may also be reported, as well as auxiliary data such as water color (Forel-Ule scale), water transparency (Secchi disk depth), and depth to bottom. Values of density (sigma-t), sound velocity, and dynamic depth anomaly are computed from measured parameters. Each station contains the measurements taken at the observed depth levels, but also includes data values interpolated to a set of standard depth levels. The C116/C118 format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data record was comprised of pairs of temperature-depth values. Unlike the MBT Data File, in which temperature

This dataset contains Bathythermograph (XBT) and Marine Mammal Sighting and Census data. The Marine Mammal Sighting and Census data type contains data from field observations of marine mammals obtained from aircraft and various other platforms. Data were collected as part of Distribution/Abundance of Marine Mammals in Gulf of Mexico (GULFCET I project) funded by grant no MMS 14-35-0001-30619. The data were collected over two year period from April 24, 1992 to June 10, 1994. 19 files of data containing 2,917 records was submitted by Dr. Giulietta Fargion of Texas A&M University, College Station, TX.

CTD, current meter, meteorological buoy, and bottle data were collected from the Gulf of Mexico from the ALPHA HELIX and other platforms. Data were collected by Texas A&M University (TAMU) in support of LATEX A from 18 March 1993 to 23 September 1993. CTD parameters include temperature, salinity, and sigma-t. Current meter parameters include E/W velocity (U), N/S velocity, temperature, and conductivity. Bottle data includes concentrations of dissolved oxygen, phosphate, nitrite, nitrate, silicate, ammonium, urea, chlorophyll-a, and suspended particulate material.