Conductivity-temperature-depth (CTD) measurements made with a Sontek CastAway CTD instrument, collected in the Sacramento River Deep Water Ship Channel in July and August 2019. Measurements were collected at 5 points on the cross-section at Channel Marker 73, each hour for 30 hours, with four 30-hours studies collected over four consecutive weeks.

Water temperature, conductivity, and dissolved oxygen data collected at 5 locations in the Sacramento River Deep Water Ship Channel. Each of the 5 stations had a string suspended from a buoy, with instruments located at consistent depths below the water surface. Data were collected at 5- or 10-minute intervals from July 2, 2019 to September 18, 2019.

Water temperature, conductivity, and dissolved oxygen data collected at 5 locations in the Sacramento River Deep Water Ship Channel. Each of the 5 stations had a string suspended from a buoy, with instruments located at consistent depths below the water surface. Data were collected at 5- or 10-minute intervals from July 2, 2019 to September 18, 2019.

Measurements of Electrical Conductivity at 25 Degrees Celsius collected at Sacramento River At Freeport. Currently collected twice a year, previously collected quarterly. Access further information for this data set by contacting Bureau of Reclamation, California-Great Basin Region, Environmental Affairs Division (CGB-157). See ResultAttributes for STAFF_GAUGE, SMPL_DEPTH, SMPL_CATEGORY_NAME, METHOD_CODE, RESULT_RL, RESULT_RL-UNIT_STD_NAME, RESULT_MDL, RESULT_MDL-UNIT_STD_NAME, USBR_QA_SUBTYPE_NAME, USBR_QULFR_DESCRIPTION. STAFF_GAUGE is the water height in decimal feet measured by gauge (e.g., 15.2). SMPL_DEPTH is the vertical depth at which sample is collected (e.g., 0 - 15 cm). For water samples: depth below water/air interface. For sediment and soil samples: depth below water/solid or air/solid interface. SMPL_CATEGORY_NAME is the category type of sample (e.g., Composite). METHOD_CODE is the name of method used to obtain result (e.g., EPA 200.8). RESULT_RL is the result reporting limit (accounting for dilution) (e.g., 0.02). RESULT_RL-UNIT_STD_NAME is the unit associated with RESULT_RL (e.g., mg/L). RESULT_MDL is the result method detection limit (e.g., 0.007). RESULT_MDL-UNIT_STD_NAME is the unit associated with RESULT_MDL (e.g., mg/L). USBR_QA_SUBTYPE_NAME is the quality control type of the sample (e.g., USBR_BLANK_SPIKE). USBR_QULFR_DESCRIPTION is the quality assurance description (if any) (e.g., Result may have a high bias.).

Longitudinal profiles of surface water chemistry were made using a Sea-Bird SUNA optical nitrate sensor and a YSI EXO2 water quality sonde. Water from 0.1 m depth was pumped to sensors configured with flow cells from a moving boat, and data were georeferenced with a Garmin GPS and compiled on a Campbell Sci datalogger. Details on the method can be found in Crawford et al. 2015 and Downing et al. 2016. Data were collected between July 10 and Aug 26, 2019 as part of an ecosystem experiment. Two longitudinal transects were made each day. In the morning, the boat traveled southward from the Sacramento Locks to Navigation Light 70. The afternoon transects proceeded while traveling northward. Each point has also been linearly referenced as distance to the northern terminus of the channel. Linear referencing was done in the R programming language after snapping points to a line running through the channel center.

Measurements of Electrical Conductivity at 25 Degrees Celsius collected at Sacramento River At Red Bluff Forebay. Currently collected twice a year, previously collected quarterly. Access further information for this data set by contacting Bureau of Reclamation, California-Great Basin Region, Environmental Affairs Division (CGB-157). See ResultAttributes for STAFF_GAUGE, SMPL_DEPTH, SMPL_CATEGORY_NAME, METHOD_CODE, RESULT_RL, RESULT_RL-UNIT_STD_NAME, RESULT_MDL, RESULT_MDL-UNIT_STD_NAME, USBR_QA_SUBTYPE_NAME, USBR_QULFR_DESCRIPTION. STAFF_GAUGE is the water height in decimal feet measured by gauge (e.g., 15.2). SMPL_DEPTH is the vertical depth at which sample is collected (e.g., 0 - 15 cm). For water samples: depth below water/air interface. For sediment and soil samples: depth below water/solid or air/solid interface. SMPL_CATEGORY_NAME is the category type of sample (e.g., Composite). METHOD_CODE is the name of method used to obtain result (e.g., EPA 200.8). RESULT_RL is the result reporting limit (accounting for dilution) (e.g., 0.02). RESULT_RL-UNIT_STD_NAME is the unit associated with RESULT_RL (e.g., mg/L). RESULT_MDL is the result method detection limit (e.g., 0.007). RESULT_MDL-UNIT_STD_NAME is the unit associated with RESULT_MDL (e.g., mg/L). USBR_QA_SUBTYPE_NAME is the quality control type of the sample (e.g., USBR_BLANK_SPIKE). USBR_QULFR_DESCRIPTION is the quality assurance description (if any) (e.g., Result may have a high bias.).

Measurements of Electrical Conductivity at 25 Degrees Celsius collected at Coalinga Canal. Currently collected twice a year, previously collected quarterly. Access further information for this data set by contacting Bureau of Reclamation, California-Great Basin Region, Environmental Affairs Division (CGB-157). See ResultAttributes for STAFF_GAUGE, SMPL_DEPTH, SMPL_CATEGORY_NAME, METHOD_CODE, RESULT_RL, RESULT_RL-UNIT_STD_NAME, RESULT_MDL, RESULT_MDL-UNIT_STD_NAME, USBR_QA_SUBTYPE_NAME, USBR_QULFR_DESCRIPTION. STAFF_GAUGE is the water height in decimal feet measured by gauge (e.g., 15.2). SMPL_DEPTH is the vertical depth at which sample is collected (e.g., 0 - 15 cm). For water samples: depth below water/air interface. For sediment and soil samples: depth below water/solid or air/solid interface. SMPL_CATEGORY_NAME is the category type of sample (e.g., Composite). METHOD_CODE is the name of method used to obtain result (e.g., EPA 200.8). RESULT_RL is the result reporting limit (accounting for dilution) (e.g., 0.02). RESULT_RL-UNIT_STD_NAME is the unit associated with RESULT_RL (e.g., mg/L). RESULT_MDL is the result method detection limit (e.g., 0.007). RESULT_MDL-UNIT_STD_NAME is the unit associated with RESULT_MDL (e.g., mg/L). USBR_QA_SUBTYPE_NAME is the quality control type of the sample (e.g., USBR_BLANK_SPIKE). USBR_QULFR_DESCRIPTION is the quality assurance description (if any) (e.g., Result may have a high bias.).

This dataset includes water temperature, salinity, and other parameter profiles taken by CTD from the R/V Discovery, cruise DY16902, on the NW Atlantic shelf. Dataset consists of netCDF files of downcast CTD data collected at 84 CTD stations. This cruise is U.S. State Department MSR U2023-013 as part of the World Data Service for Oceanography.

Measurements of Electrical Conductivity at 25 Degrees Celsius collected at Sacramento River Below Keswick Dam. Currently collected twice a year, previously collected quarterly. Access further information for this data set by contacting Bureau of Reclamation, California-Great Basin Region, Environmental Affairs Division (CGB-157). See ResultAttributes for STAFF_GAUGE, SMPL_DEPTH, SMPL_CATEGORY_NAME, METHOD_CODE, RESULT_RL, RESULT_RL-UNIT_STD_NAME, RESULT_MDL, RESULT_MDL-UNIT_STD_NAME, USBR_QA_SUBTYPE_NAME, USBR_QULFR_DESCRIPTION. STAFF_GAUGE is the water height in decimal feet measured by gauge (e.g., 15.2). SMPL_DEPTH is the vertical depth at which sample is collected (e.g., 0 - 15 cm). For water samples: depth below water/air interface. For sediment and soil samples: depth below water/solid or air/solid interface. SMPL_CATEGORY_NAME is the category type of sample (e.g., Composite). METHOD_CODE is the name of method used to obtain result (e.g., EPA 200.8). RESULT_RL is the result reporting limit (accounting for dilution) (e.g., 0.02). RESULT_RL-UNIT_STD_NAME is the unit associated with RESULT_RL (e.g., mg/L). RESULT_MDL is the result method detection limit (e.g., 0.007). RESULT_MDL-UNIT_STD_NAME is the unit associated with RESULT_MDL (e.g., mg/L). USBR_QA_SUBTYPE_NAME is the quality control type of the sample (e.g., USBR_BLANK_SPIKE). USBR_QULFR_DESCRIPTION is the quality assurance description (if any) (e.g., Result may have a high bias.).

Measurements of Electrical Conductivity at 25 Degrees Celsius collected at Sacramento River Below Shasta Dam. Currently collected twice a year, previously collected quarterly. Access further information for this data set by contacting Bureau of Reclamation, California-Great Basin Region, Environmental Affairs Division (CGB-157). See ResultAttributes for STAFF_GAUGE, SMPL_DEPTH, SMPL_CATEGORY_NAME, METHOD_CODE, RESULT_RL, RESULT_RL-UNIT_STD_NAME, RESULT_MDL, RESULT_MDL-UNIT_STD_NAME, USBR_QA_SUBTYPE_NAME, USBR_QULFR_DESCRIPTION. STAFF_GAUGE is the water height in decimal feet measured by gauge (e.g., 15.2). SMPL_DEPTH is the vertical depth at which sample is collected (e.g., 0 - 15 cm). For water samples: depth below water/air interface. For sediment and soil samples: depth below water/solid or air/solid interface. SMPL_CATEGORY_NAME is the category type of sample (e.g., Composite). METHOD_CODE is the name of method used to obtain result (e.g., EPA 200.8). RESULT_RL is the result reporting limit (accounting for dilution) (e.g., 0.02). RESULT_RL-UNIT_STD_NAME is the unit associated with RESULT_RL (e.g., mg/L). RESULT_MDL is the result method detection limit (e.g., 0.007). RESULT_MDL-UNIT_STD_NAME is the unit associated with RESULT_MDL (e.g., mg/L). USBR_QA_SUBTYPE_NAME is the quality control type of the sample (e.g., USBR_BLANK_SPIKE). USBR_QULFR_DESCRIPTION is the quality assurance description (if any) (e.g., Result may have a high bias.).