This is the 2014 Integrated Report. EPA approved this submission in accordance with Sections 303(d), 305(b), and 314(l) of the Clean Water Act, on October 16, 2015. The Integrated Report (IR) combines two water quality reports required under sections 305(b) and 303(d) of the federal Clean Water Act. Section 305(b) requires states, territories and authorized tribes to perform annual water quality assessments to determine the status of jurisdictional waters. Section 303(d) requires states, territories and authorized tribes to identify waters assessed as not meeting water quality standards(see Code of Maryland Regulations 26.08.02). Waters that do not meet standards may require a Total Maximum Daily Load to determine the maximum amount of an impairing substance or pollutant that a particular water body can assimilate and still meet water quality criteria. Historically, the 303(d) List and the 305(b) report were submitted to the Environmental Protection Agency (EPA) as separate documents but more recent guidance has called for combining these two reports into a single biennial publication. More information is available at http://www.mde.state.md.us/PROGRAMS/WATER/TMDL/INTEGRATED303DREPORTS/Pages/Programs/WaterPrograms/TMDL/Maryland%20303%20dlist/index.aspx A searchable version of this data is available at http://www.mde.state.md.us/programs/Water/TMDL/Integrated303dReports/Pages/303d.aspx

305b Assessed 2014 River Lake Estuary Set: Connecticut 305b Assessed River 2014 is a 1:24,000-scale, line feature-based layer that includes rivers that have been assessed to comply with Sections 305(b) and 303(d) of the federal Clean Water Act. Section 305(b) of the Clean Water Act requires each state to monitor, assess and report on the quality of its waters relative to attainment of designated uses established by the State's water quality standards. Section 303(d) requires each State to compile a subset of that list identifying only those waters not meeting water quality standards and assign a Total Maximum Daily Load (TMDL) priority ranking to each impaired waterbody. This layer is based on information collected and compiled prior to 2014. It represents conditions at a particular point in time and does not represent current conditions. This layer includes only rivers that were assessed in the time period above referenced. It can be used with the 2014 Connecticut 305b Assessed Lake layer and the Connecticut 305b Assessed Estuary layer to geographically display attainment and non-attainment for each designated use on assessed waters within Connecticut's boundaries. Features are lines that represent the locations of assessed rivers. The sources for these features include the hydrography layer and the water quality classification layer. Attribute information is comprised of a unique identifier (segment ID) for each feature, the name of the waterbody, its location, the assessment cycle (year), the water type, the water quality class goal, the length of the feature in miles, the National Hydrography Dataset basin number, and the assessment for the following categories: aquatic life, recreation, fish consumption, and drinking water supply. Data is compiled at 1:24,000 scale. This dataset is not updated. Connecticut 305b Assessed Lake 2014 is a 1:24,000-scale, polygon feature-based layer that includes lakes that have been assessed in compliance with Sections 305(b) and 303(d) of the federal Clean Water Act. Section 305(b) of the Clean Water Act requires each state to monitor, assess and report on the quality of its waters relative to attainment of designated uses established by the State's water quality standards. Section 303(d) requires each State to compile a subset of that list identifying only those waters not meeting water quality standards and assign a Total Maximum Daily Load (TMDL) priority ranking to each impaired waterbody. This layer is based on information collected and compiled prior to 2014. It represents conditions at a particular point in time and does not represent current conditions. This layer includes only assessed lakes. It can be used with the 2014 Connecticut 305b Assessed River layer and the Connecticut 305b Assessed Estuary layer to geographically display attainment and non-attainment for each designated use on assessed waters within Connecticut's boundaries. Features are polygon locations that represent the locations of assessed lakes. The sources for these features include the hydrography layer and the water quality classification layer. Attribute information is comprised of the Connecticut lake identification number, a unique identifier for each feature, the name of the waterbody, its location, the assessment cycle (year), the water type, the water quality class goal, the length of the feature in miles, the National Hydrography Dataset basin number, and the assessment for the following categories: aquatic life, recreation, fish consumption, and drinking water supply. Data is compiled at 1:24,000 scale. This dataset is not updated. onnecticut 305b Assessed Estuary 2014 is a 1:24,000-scale, polygon feature-based layer that includes estuaries that have been assessed in compliance with Sections 305(b) and 303(d) of the federal Clean Water Act. Section 305(b) of the Clean Water Act requires each state to monitor, assess and report on the quality of its waters relative to attainment of designated uses estab

305b Assessed 2006 River, Lake, Estuary Set: Connecticut 305b Assessed River 2006 is a 1:24,000-scale, line feature-based layer that includes rivers that have been assessed to comply with Sections 305(b) and 303(d) of the federal Clean Water Act. Section 305(b) of the Clean Water Act requires each state to monitor, assess and report on the quality of its waters relative to attainment of designated uses established by the State's water quality standards. Section 303(d) requires each State to compile a subset of that list identifying only those waters not meeting water quality standards and assign a Total Maximum Daily Load (TMDL) priority ranking to each impaired waterbody. This layer is based on information collected and compiled prior to 2006. It represents conditions at a particular point in time and does not represent current conditions. This layer includes only rivers that were assessed in the time period above referenced. It can be used with the 2006 Connecticut 305b Assessed Lake layer and the Connecticut 305b Assessed Estuary layer to geographically display attainment and non-attainment for each designated use on assessed waters within Connecticut's boundaries. Features are lines that represent the locations of assessed rivers. The sources for these features include the hydrography layer and the water quality classification layer. Attribute information is comprised of a unique identifier (segment ID) for each feature, the name of the waterbody, its location, the assessment cycle (year), the water type, the water quality class goal, the length of the feature in miles, the National Hydrography Dataset basin number, and the assessment for the following categories: aquatic life, recreation, fish consumption, and drinking water supply. Data is compiled at 1:24,000 scale. This dataset is not updated. For more information, please refer to the following report: "2006 Integrated Water Quality Report" at http://www.ct.gov/dep/lib/dep/water/water_quality_management/305b/2006_305(b)fullplusapps.pdf Connecticut 305b Assessed Lake 2006 is a 1:24,000-scale, polygon feature-based layer that includes lakes that have been assessed in compliance with Sections 305(b) and 303(d) of the federal Clean Water Act. Section 305(b) of the Clean Water Act requires each state to monitor, assess and report on the quality of its waters relative to attainment of designated uses established by the State's water quality standards. Section 303(d) requires each State to compile a subset of that list identifying only those waters not meeting water quality standards and assign a Total Maximum Daily Load (TMDL) priority ranking to each impaired waterbody. This layer is based on information collected and compiled prior to 2006. It represents conditions at a particular point in time and does not represent current conditions. This layer includes only assessed lakes. It can be used with the 2006 Connecticut 305b Assessed River layer and the Connecticut 305b Assessed Estuary layer to geographically display attainment and non-attainment for each designated use on assessed waters within Connecticut's boundaries. Features are polygon locations that represent the locations of assessed lakes. The sources for these features include the hydrography layer and the water quality classification layer. Attribute information is comprised of the Connecticut lake identification number, a unique identifier (segment ID) for each feature, the name of the waterbody, its location, the assessment cycle (year), the water type, the water quality class goal, the length of the feature in miles, the National Hydrography Dataset basin number, and the assessment for the following categories: aquatic life, recreation, fish consumption, and drinking water supply. Data is compiled at 1:24,000 scale. This dataset is not updated. For more inform

This layer includes 303 features indicating all assessed polygonal water bodies for the combined 2014 and 2016 Integrated Report. Under Section 303(d) of the Clean Water Act, states, territories and authorized tribes are required to develop a list of water quality limited segments. These waters on the list do not meet water quality standards, even after point sources of pollution have installed the minimum required levels of pollution control technology. The Clean Water Act requires that these jurisdictions establish priority rankings for water on the lists and develop action plans, called as Total Maximum Daily Loads (TMDL), to improve water quality. Every two years, the California State Water Resources Control Board submits a report on the State's water quality to the U.S. Environmental Protection Agency pursuant to Section 305(b) of the federal Clean Water Act. The Report provides water quality information to the general public and serves as the basis for U.S. EPA 's National Water Quality Inventory Report to Congress. This dataset is a compilation of all polygonal water body features in California assessed under Sections 303(d) and 305(b) of the Clean Water Act for the combined 2014 and 2016 Integrated Report listing cycle. Each water body is assigned a unique Water Body ID (WBID) number as well as selected associated information (water body name, Regional Water Quality Control Board number, etc.).

Hydrographic and Impairment Statistics (HIS) is a National Park Service (NPS) Water Resources Division (WRD) project established to track certain goals created in response to the Government Performance and Results Act of 1993 (GPRA). One water resources management goal established by the Department of the Interior under GRPA requires NPS to track the percent of its managed surface waters that are meeting Clean Water Act (CWA) water quality standards. This goal requires an accurate inventory that spatially quantifies the surface water hydrography that each bureau manages and a procedure to determine and track which waterbodies are or are not meeting water quality standards as outlined by Section 303(d) of the CWA. This project helps meet this DOI GRPA goal by inventorying and monitoring in a geographic information system for the NPS: (1) CWA 303(d) quality impaired waters and causes; and (2) hydrographic statistics based on the United States Geological Survey (USGS) National Hydrography Dataset (NHD). Hydrographic and 303(d) impairment statistics were evaluated based on a combination of 1:24,000 (NHD) and finer scale data (frequently provided by state GIS layers).

Hydrographic and Impairment Statistics (HIS) is a National Park Service (NPS) Water Resources Division (WRD) project established to track certain goals created in response to the Government Performance and Results Act of 1993 (GPRA). One water resources management goal established by the Department of the Interior under GRPA requires NPS to track the percent of its managed surface waters that are meeting Clean Water Act (CWA) water quality standards. This goal requires an accurate inventory that spatially quantifies the surface water hydrography that each bureau manages and a procedure to determine and track which waterbodies are or are not meeting water quality standards as outlined by Section 303(d) of the CWA. This project helps meet this DOI GRPA goal by inventorying and monitoring in a geographic information system for the NPS: (1) CWA 303(d) quality impaired waters and causes; and (2) hydrographic statistics based on the United States Geological Survey (USGS) National Hydrography Dataset (NHD). Hydrographic and 303(d) impairment statistics were evaluated based on a combination of 1:24,000 (NHD) and finer scale data (frequently provided by state GIS layers).

305b Assessed 2014 River Lake Estuary Set: Connecticut 305b Assessed River 2014 is a 1:24,000-scale, line feature-based layer that includes rivers that have been assessed to comply with Sections 305(b) and 303(d) of the federal Clean Water Act. Section 305(b) of the Clean Water Act requires each state to monitor, assess and report on the quality of its waters relative to attainment of designated uses established by the State's water quality standards. Section 303(d) requires each State to compile a subset of that list identifying only those waters not meeting water quality standards and assign a Total Maximum Daily Load (TMDL) priority ranking to each impaired waterbody. This layer is based on information collected and compiled prior to 2014. It represents conditions at a particular point in time and does not represent current conditions. This layer includes only rivers that were assessed in the time period above referenced. It can be used with the 2014 Connecticut 305b Assessed Lake layer and the Connecticut 305b Assessed Estuary layer to geographically display attainment and non-attainment for each designated use on assessed waters within Connecticut's boundaries. Features are lines that represent the locations of assessed rivers. The sources for these features include the hydrography layer and the water quality classification layer. Attribute information is comprised of a unique identifier (segment ID) for each feature, the name of the waterbody, its location, the assessment cycle (year), the water type, the water quality class goal, the length of the feature in miles, the National Hydrography Dataset basin number, and the assessment for the following categories: aquatic life, recreation, fish consumption, and drinking water supply. Data is compiled at 1:24,000 scale. This dataset is not updated. Connecticut 305b Assessed Lake 2014 is a 1:24,000-scale, polygon feature-based layer that includes lakes that have been assessed in compliance with Sections 305(b) and 303(d) of the federal Clean Water Act. Section 305(b) of the Clean Water Act requires each state to monitor, assess and report on the quality of its waters relative to attainment of designated uses established by the State's water quality standards. Section 303(d) requires each State to compile a subset of that list identifying only those waters not meeting water quality standards and assign a Total Maximum Daily Load (TMDL) priority ranking to each impaired waterbody. This layer is based on information collected and compiled prior to 2014. It represents conditions at a particular point in time and does not represent current conditions. This layer includes only assessed lakes. It can be used with the 2014 Connecticut 305b Assessed River layer and the Connecticut 305b Assessed Estuary layer to geographically display attainment and non-attainment for each designated use on assessed waters within Connecticut's boundaries. Features are polygon locations that represent the locations of assessed lakes. The sources for these features include the hydrography layer and the water quality classification layer. Attribute information is comprised of the Connecticut lake identification number, a unique identifier for each feature, the name of the waterbody, its location, the assessment cycle (year), the water type, the water quality class goal, the length of the feature in miles, the National Hydrography Dataset basin number, and the assessment for the following categories: aquatic life, recreation, fish consumption, and drinking water supply. Data is compiled at 1:24,000 scale. This dataset is not updated. onnecticut 305b Assessed Estuary 2014 is a 1:24,000-scale, polygon feature-based layer that includes estuaries that have been assessed in compliance with Sections 305(b) and 303(d) of the federal Clean Water Act. Section 305(b) of the Clean Water Act requires each state to monitor, assess and report on the quality of its waters relative to attainment of designated uses estab

Hydrographic and Impairment Statistics (HIS) is a National Park Service (NPS) Water Resources Division (WRD) project established to track certain goals created in response to the Government Performance and Results Act of 1993 (GPRA). One water resources management goal established by the Department of the Interior under GRPA requires NPS to track the percent of its managed surface waters that are meeting Clean Water Act (CWA) water quality standards. This goal requires an accurate inventory that spatially quantifies the surface water hydrography that each bureau manages and a procedure to determine and track which waterbodies are or are not meeting water quality standards as outlined by Section 303(d) of the CWA. This project helps meet this DOI GRPA goal by inventorying and monitoring in a geographic information system for the NPS: (1) CWA 303(d) quality impaired waters and causes; and (2) hydrographic statistics based on the United States Geological Survey (USGS) National Hydrography Dataset (NHD). Hydrographic and 303(d) impairment statistics were evaluated based on a combination of 1:24,000 (NHD) and finer scale data (frequently provided by state GIS layers).

Hydrographic and Impairment Statistics (HIS) is a National Park Service (NPS) Water Resources Division (WRD) project established to track certain goals created in response to the Government Performance and Results Act of 1993 (GPRA). One water resources management goal established by the Department of the Interior under GRPA requires NPS to track the percent of its managed surface waters that are meeting Clean Water Act (CWA) water quality standards. This goal requires an accurate inventory that spatially quantifies the surface water hydrography that each bureau manages and a procedure to determine and track which waterbodies are or are not meeting water quality standards as outlined by Section 303(d) of the CWA. This project helps meet this DOI GRPA goal by inventorying and monitoring in a geographic information system for the NPS: (1) CWA 303(d) quality impaired waters and causes; and (2) hydrographic statistics based on the United States Geological Survey (USGS) National Hydrography Dataset (NHD). Hydrographic and 303(d) impairment statistics were evaluated based on a combination of 1:24,000 (NHD) and finer scale data (frequently provided by state GIS layers).

Hydrographic and Impairment Statistics (HIS) is a National Park Service (NPS) Water Resources Division (WRD) project established to track certain goals created in response to the Government Performance and Results Act of 1993 (GPRA). One water resources management goal established by the Department of the Interior under GRPA requires NPS to track the percent of its managed surface waters that are meeting Clean Water Act (CWA) water quality standards. This goal requires an accurate inventory that spatially quantifies the surface water hydrography that each bureau manages and a procedure to determine and track which waterbodies are or are not meeting water quality standards as outlined by Section 303(d) of the CWA. This project helps meet this DOI GRPA goal by inventorying and monitoring in a geographic information system for the NPS: (1) CWA 303(d) quality impaired waters and causes; and (2) hydrographic statistics based on the United States Geological Survey (USGS) National Hydrography Dataset (NHD). Hydrographic and 303(d) impairment statistics were evaluated based on a combination of 1:24,000 (NHD) and finer scale data (frequently provided by state GIS layers).