Current meter data were collected using moored current meter casts in the Gulf of Mexico from October 18, 1977 to June 1, 1979. Data were submitted by Atlantic Oceanographic Meteorological Laboratory - Miami, FL (AOML) as part of the Ocean Thermal Energy Conversion (OTEC) project. Data were processed by NODC to the NODC standard Current Meter Data (F015) format. The F015 format is used for time series measurements of ocean currents. These data are obtained from current meter moorings and represent Eulerian method of current measurement, i.e., the meters are deployed at a fixed point and measure flow past a sensor. Position, bottom depth, sensor depth, and meter characteristics are reported for each station. The data record comprises values of east-west (u) and north-south (v) current vector components at specified date and time. Current direction is defined as the direction toward which the water is flowing with positive directions east and north and negative directions west and south. Data values may be subject to averaging or filtering and are typically reported at 10-15 minute time intervals. Water temperature, pressure, and conductivity or salinity may also be reported. A text record is available for optional comments.

Data consists of Acoustic Doppler Current Profiles recorded in NODC'S F004 format. The data were collected using an Ametek-Straza instrument aboard the R/V CAPE FLORIDA, cruise no. CF-8405 in May 1984. These data were collected by the University of Miami in the Gulf of Mexico and its part of years 1 and 2 of SAIC'S Mineral Management Service (MMS) sponsored Gulf of Mexico Physical Oceanography Program. This program was funded under MMS contract number 14-12-0001-29158. The data were recorded in ASCII format and submitted by Dr. Evans Waddell. The F004 format is used for data from measurements and analyses of physical and chemical characteristics of the water column. Among chemical parameters that may be recorded are salinity, pH, and concentration of oxygen, ammonia, nitrate, phosphate, chlorophyll, and suspended solids. Physical parameters that may be recorded include temperature, density (sigma-t), transmissivity, and current velocity (east-west and north-south components). Cruise and station information, including environmental conditions of the study site at the time of observations, is also included.

Current meter data were collected using moored current meter casts in the Gulf of Mexico from December 11, 1983 to November 1, 1984. Data were submitted by Environmental Sciences and Engineering, INC. - Gainesville as part of the Gulf of Mexico SW Florida Shelf Benthic Communities project. Data were processed by NODC to the NODC standard Current Meter Data (F015) format. The F015 format is used for time series measurements of ocean currents. These data are obtained from current meter moorings and represent Eulerian method of current measurement, i.e., the meters are deployed at a fixed point and measure flow past a sensor. Position, bottom depth, sensor depth, and meter characteristics are reported for each station. The data record comprises values of east-west (u) and north-south (v) current vector components at specified date and time. Current direction is defined as the direction toward which the water is flowing with positive directions east and north and negative directions west and south. Data values may be subject to averaging or filtering and are typically reported at 10-15 minute time intervals. Water temperature, pressure, and conductivity or salinity may also be reported. A text record is available for optional comments.

Current meter components data were collected from FIXED PLATFORMS in the Gulf of Mexico from 17 July 1980 to 01 February 1981. Data were collected by Texas A&M University (TAMU). Data were processed by NODC to the NODC standard F015 Current Meter Components format. The F015 format contains time series measurements of ocean currents. These data are obtained from current meter moorings and represent the Eulerian method of current measurement, i.e., the meters are deployed at a fixed point and measure flow past a sensor. Position, bottom depth, sensor depth and meter characteristics are reported for each station. The data record includes values of east-west (u) and north-south (v) current vector components at specified date and time. Current direction is defined as the direction toward which the water is flowing with positive directions east and north. Data values may be subject to averaging or filtering and are typically reported at 10 - 15 minute time intervals. Water temperature, pressure and conductivity or salinity may also be reported. A text record is available for optional comments.

Current meter data were collected using moored current meter casts in the Coastal Waters of Florida from November 23, 1990 to August 19, 1991. Data were submitted by Science Applications, Inc. - Raleigh NC as part of the Florida Straits Physical Oceanography (FSPO) project. Data were processed by NODC to the NODC standard Current Meter Data (F015) format. The F015 format is used for time series measurements of ocean currents. These data are obtained from current meter moorings and represent Eulerian method of current measurement, i.e., the meters are deployed at a fixed point and measure flow past a sensor. Position, bottom depth, sensor depth, and meter characteristics are reported for each station. The data record comprises values of east-west (u) and north-south (v) current vector components at specified date and time. Current direction is defined as the direction toward which the water is flowing with positive directions east and north and negative directions west and south. Data values may be subject to averaging or filtering and are typically reported at 10-15 minute time intervals. Water temperature, pressure, and conductivity or salinity may also be reported. A text record is available for optional comments.

Current direction and temperature data were collected using moored current meter casts in the Gulf of Mexico from June 13, 1979 to July 3, 1979. Data were submitted by National Ocean Service (NOS). Data were processed by NODC to the NODC standard Current Meter Data (F005) format. The F005 format is used for time series measurements of ocean currents obtained using moored current-measuring instruments, principally Aanderaa current meters (manufactured by Aanderaa Instruments Inc.). These data represent the Eulerian method of current measurement, i.e., the meters are deployed at a fixed mooring point and measure flow past the sensor. Position, water depth, and sensor depth are reported for each station. The data record comprises values of current direction and speed at specified date and time. Data values may be subject to averaging or filtering and are typically reported at 10-15 minute time intervals. Other environmental parameters may also be reported. These include: water temperature, salinity, conductivity, and transmissivity; wind direction and speed; and dominant wave direction, height, and period. A text field is available for optional comments.

Current meter data were collected using moored current meter casts in the Caribbean Sea from February 15, 1979 to February 1, 1980. Data were submitted by University of California - Berkeley as part of the Ocean Thermal Energy Conversion (OTEC) project. Data were processed by NODC to the NODC standard Current Meter Data (F015) format. The F015 format is used for time series measurements of ocean currents. These data are obtained from current meter moorings and represent Eulerian method of current measurement, i.e., the meters are deployed at a fixed point and measure flow past a sensor. Position, bottom depth, sensor depth, and meter characteristics are reported for each station. The data record comprises values of east-west (u) and north-south (v) current vector components at specified date and time. Current direction is defined as the direction toward which the water is flowing with positive directions east and north and negative directions west and south. Data values may be subject to averaging or filtering and are typically reported at 10-15 minute time intervals. Water temperature, pressure, and conductivity or salinity may also be reported. A text record is available for optional comments.

Current meter data were collected using moored current meter casts in the Caribbean Sea from September 27, 1979 to December 1, 1979. Data were submitted by University of California - Berkeley as part of the Ocean Thermal Energy Conversion (OTEC) project. Data were processed by NODC to the NODC standard Current Meter Data (F015) format. The F015 format is used for time series measurements of ocean currents. These data are obtained from current meter moorings and represent Eulerian method of current measurement, i.e., the meters are deployed at a fixed point and measure flow past a sensor. Position, bottom depth, sensor depth, and meter characteristics are reported for each station. The data record comprises values of east-west (u) and north-south (v) current vector components at specified date and time. Current direction is defined as the direction toward which the water is flowing with positive directions east and north and negative directions west and south. Data values may be subject to averaging or filtering and are typically reported at 10-15 minute time intervals. Water temperature, pressure, and conductivity or salinity may also be reported. A text record is available for optional comments.

Current meter data were collected using moored current meter casts in the South Atlantic Ocean from June 18, 1992 to October 29, 1993. Data were submitted by Oregon State University (OSU) as part of the BEnguela Sources and Transport (BEST) project. Data were processed by NODC to the NODC standard Current Meter Data (F015) format. The F015 format is used for time series measurements of ocean currents. These data are obtained from current meter moorings and represent Eulerian method of current measurement, i.e., the meters are deployed at a fixed point and measure flow past a sensor. Position, bottom depth, sensor depth, and meter characteristics are reported for each station. The data record comprises values of east-west (u) and north-south (v) current vector components at specified date and time. Current direction is defined as the direction toward which the water is flowing with positive directions east and north and negative directions west and south. Data values may be subject to averaging or filtering and are typically reported at 10-15 minute time intervals. Water temperature, pressure, and conductivity or salinity may also be reported. A text record is available for optional comments.

Current direction, bathythermograph (xbt), CTD, and other data were collected using moored current meter casts and other instruments in the Gulf of Mexico from April 4, 1987 to November 2, 1988. Data were submitted by Science Applications, INC - Raleigh NC as part of the Gulf of Mexico Physical Oceanography (GMPO) project. Data has been processed by NODC to the NODC standard F015- Current Meter Data, F022- CTD High Resolution, C100- Ocean Station Data, and C116/118- Bathythermograph XBT formats. The F015 format is used for time series measurements of ocean currents. These data are obtained from current meter moorings and represent Eulerian method of current measurement, i.e., the meters are deployed at a fixed point and measure flow past a sensor. Position, bottom depth, sensor depth, and meter characteristics are reported for each station. The data record comprises values of east-west (u) and north-south (v) current vector components at specified date and time. Current direction is defined as the direction toward which the water is flowing with positive directions east and north and negative directions west and south. Data values may be subject to averaging or filtering and are typically reported at 10-15 minute time intervals. Water temperature, pressure, and conductivity or salinity may also be reported. A text record is available for optional comments. The F022 format contains high-resolution data collected using CTD (conductivity-temperature-depth) and STD (salinity-temperature-depth) instruments. As they are lowered and raised in the oceans, these electronic devices provide nearly continuous profiles of temperature, salinity, and other parameters. Data values may be subject to averaging or filtering or obtained by interpolation and may be reported at depth intervals as fine as 1m. Cruise and instrument information, position, date, time and sampling interval are reported for each station. Environmental data at the time of the cast (meteorological and sea surface conditions) may also be reported. The data record comprises values of temperature, salinity or conductivity, density (computed sigma-t), and possibly dissolved oxygen or transmissivity at specified depth or pressure levels. Data may be reported at either equally or unequally spaced depth or pressure intervals. A text record is available for comments. The Oceanographic Station Data (C100) format contains physical-chemical oceanographic data recorded at discrete depth levels. Most of the observations were made using multi-bottle Nansen casts or other types of water samplers. A small amount (about 5 percent) were obtained using electronic CTD conductivity-temperature-depth) or STD (salinity-temperature-depth) recorders. The CTD/STD data were reported to NODC at depth levels equivalent to Nansen cast data, however, and have been processed and stored the same as the Nansen data. Cruise information (e.g., ship, country, institution), position, date, and time, and reported for each station. The principal measured parameters are temperature and salinity, but dissolved oxygen, phosphate, total phosphorus, silicate, nitrate, nitrite, and pH may be reported. Meteorological conditions at the time of the cast (e.g., air temperature and pressure, wind, waves) may also be reported, as well as auxiliary data such as water color (Forel-Ule scale), water transparency (Secchi disk depth), and depth to bottom. Values of density (sigma-t), sound velocity, and dynamic depth anomaly are computed from measured parameters. Each station contains the measurements taken at the observed depth levels, but also includes data values interpolated to a set of standard depth levels. The C116/C118 format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data record was comprised of pairs of temperature-depth values. Unlike the MBT Data File, in which temperature