,This is a national data collection of data resources managed by the Bureau of Ocean Energy Management (BOEM) for the Outer Continental Shelf (OCS). The data collection is designated as a National Geospatial Data Asset (NGDA) and includes: OCS BOEM Offshore Boundary Lines (Submerged Lands Act Boundary, OCSLA Limit of “8(g) Zone,” and Continental Shelf Boundary), OCS Protraction Polygons - 1st Division, OCS Gulf of Mexico NAD27 Protraction Polygons - 1st Division, OCS Block Polygons - 2nd Division, OCS Gulf of Mexico NAD27 Block Polygons - 2nd Division, and Aliquot 16ths Polygons - 3rd Division.,,All polygons are clipped to the Submerged Land Act Boundary and Continental Shelf Boundaries reflecting federal jurisdiction. The NAD27 Gulf of Mexico Protractions and Blocks have a different protraction and block configuration when compared to the OCS Protraction Polygons - 1st Division and OCS Block Polygons - 2nd Division. The NAD27 Gulf of Mexico data is used for Oil and Gas leasing.,,These data were created in the applicable NAD83 UTM or NAD27 UTM/SPCS Projection and re-projected to GCS WGS84 (EPSG 4326) for management in BOEM"s enterprise GIS. However, the services in this collection have been published in WGS 1984 Web Mercator Auxiliary Sphere (EPSG 3857). Because GIS projection and topology functions can change or generalize coordinates,these data are NOT an OFFICIAL record for the exact boundaries. These data are to be used for Cartographic purposes only and should not be used to calculate area.,Layers Metadata,OCS BOEM Offshore Boundary Lines,OCS Protraction Polygons - 1st Division,OCS Gulf of Mexico NAD27 Protraction Polygons - 1st Division,OCS Block Polygons - 2nd Division,OCS Gulf of Mexico NAD27 Block Polygons - 2nd Division,Aliquot 16ths Polygons - 3rd Division,

,This is a national data collection of data resources managed by the Bureau of Ocean Energy Management (BOEM) for the Outer Continental Shelf (OCS). The data collection is designated as a National Geospatial Data Asset (NGDA) and includes: OCS BOEM Offshore Boundary Lines (Submerged Lands Act Boundary, OCSLA Limit of “8(g) Zone,” and Continental Shelf Boundary), OCS Protraction Polygons - 1st Division, OCS Gulf of Mexico NAD27 Protraction Polygons - 1st Division, OCS Block Polygons - 2nd Division, OCS Gulf of Mexico NAD27 Block Polygons - 2nd Division, and Aliquot 16ths Polygons - 3rd Division.,,All polygons are clipped to the Submerged Land Act Boundary and Continental Shelf Boundaries reflecting federal jurisdiction. The NAD27 Gulf of Mexico Protractions and Blocks have a different protraction and block configuration when compared to the OCS Protraction Polygons - 1st Division and OCS Block Polygons - 2nd Division. The NAD27 Gulf of Mexico data is used for Oil and Gas leasing.,,These data were created in the applicable NAD83 UTM or NAD27 UTM/SPCS Projection and re-projected to GCS WGS84 (EPSG 4326) for management in BOEM"s enterprise GIS. However, the services in this collection have been published in WGS 1984 Web Mercator Auxiliary Sphere (EPSG 3857). Because GIS projection and topology functions can change or generalize coordinates,these data are NOT an OFFICIAL record for the exact boundaries. These data are to be used for Cartographic purposes only and should not be used to calculate area.,Layers Metadata,OCS BOEM Offshore Boundary Lines,OCS Protraction Polygons - 1st Division,OCS Gulf of Mexico NAD27 Protraction Polygons - 1st Division,OCS Block Polygons - 2nd Division,OCS Gulf of Mexico NAD27 Block Polygons - 2nd Division,Aliquot 16ths Polygons - 3rd Division,

,This is a national data collection of data resources managed by the Bureau of Ocean Energy Management (BOEM) for the Outer Continental Shelf (OCS). The data collection is designated as a National Geospatial Data Asset (NGDA) and includes: OCS BOEM Offshore Boundary Lines (Submerged Lands Act Boundary, OCSLA Limit of “8(g) Zone,” and Continental Shelf Boundary), OCS Protraction Polygons - 1st Division, OCS Gulf of Mexico NAD27 Protraction Polygons - 1st Division, OCS Block Polygons - 2nd Division, OCS Gulf of Mexico NAD27 Block Polygons - 2nd Division, and Aliquot 16ths Polygons - 3rd Division.,,All polygons are clipped to the Submerged Land Act Boundary and Continental Shelf Boundaries reflecting federal jurisdiction. The NAD27 Gulf of Mexico Protractions and Blocks have a different protraction and block configuration when compared to the OCS Protraction Polygons - 1st Division and OCS Block Polygons - 2nd Division. The NAD27 Gulf of Mexico data is used for Oil and Gas leasing.,,These data were created in the applicable NAD83 UTM or NAD27 UTM/SPCS Projection and re-projected to GCS WGS84 (EPSG 4326) for management in BOEM"s enterprise GIS. However, the services in this collection have been published in WGS 1984 Web Mercator Auxiliary Sphere (EPSG 3857). Because GIS projection and topology functions can change or generalize coordinates,these data are NOT an OFFICIAL record for the exact boundaries. These data are to be used for Cartographic purposes only and should not be used to calculate area.,Layers Metadata,OCS BOEM Offshore Boundary Lines,OCS Protraction Polygons - 1st Division,OCS Gulf of Mexico NAD27 Protraction Polygons - 1st Division,OCS Block Polygons - 2nd Division,OCS Gulf of Mexico NAD27 Block Polygons - 2nd Division,Aliquot 16ths Polygons - 3rd Division,

,This is a national data collection of data resources managed by the Bureau of Ocean Energy Management (BOEM) for the Outer Continental Shelf (OCS). The data collection is designated as a National Geospatial Data Asset (NGDA) and includes: OCS BOEM Offshore Boundary Lines (Submerged Lands Act Boundary, OCSLA Limit of “8(g) Zone,” and Continental Shelf Boundary), OCS Protraction Polygons - 1st Division, OCS Gulf of Mexico NAD27 Protraction Polygons - 1st Division, OCS Block Polygons - 2nd Division, OCS Gulf of Mexico NAD27 Block Polygons - 2nd Division, and Aliquot 16ths Polygons - 3rd Division.,,All polygons are clipped to the Submerged Land Act Boundary and Continental Shelf Boundaries reflecting federal jurisdiction. The NAD27 Gulf of Mexico Protractions and Blocks have a different protraction and block configuration when compared to the OCS Protraction Polygons - 1st Division and OCS Block Polygons - 2nd Division. The NAD27 Gulf of Mexico data is used for Oil and Gas leasing.,,These data were created in the applicable NAD83 UTM or NAD27 UTM/SPCS Projection and re-projected to GCS WGS84 (EPSG 4326) for management in BOEM"s enterprise GIS. However, the services in this collection have been published in WGS 1984 Web Mercator Auxiliary Sphere (EPSG 3857). Because GIS projection and topology functions can change or generalize coordinates,these data are NOT an OFFICIAL record for the exact boundaries. These data are to be used for Cartographic purposes only and should not be used to calculate area.,Layers Metadata,OCS BOEM Offshore Boundary Lines,OCS Protraction Polygons - 1st Division,OCS Gulf of Mexico NAD27 Protraction Polygons - 1st Division,OCS Block Polygons - 2nd Division,OCS Gulf of Mexico NAD27 Block Polygons - 2nd Division,Aliquot 16ths Polygons - 3rd Division,

This data set contains Composite Block Diagram (CBD) images in Adobe pdf format for areas within the BOEM Alaska Region. Each CBD describes a single block within an Official Protraction Diagram (OPD) and shows the lines (Submerged Lands Act, Limit of "8(g) Zone", maritime boundaries and/or marine sanctuaries), NAD 27 leases, and NAD 27 boundaries which occur within that block and divide it into different areas. The CBD contains additional coordinates and area calculations for an individual block. These data are scanned images of the official paper CBDs produced by the BOEM.

,This is a national data collection of data resources managed by the Bureau of Ocean Energy Management (BOEM) for the Outer Continental Shelf (OCS). The data collection is designated as a National Geospatial Data Asset (NGDA) and includes: OCS BOEM Offshore Boundary Lines (Submerged Lands Act Boundary, OCSLA Limit of “8(g) Zone,” and Continental Shelf Boundary), OCS Protraction Polygons - 1st Division, OCS Gulf of Mexico NAD27 Protraction Polygons - 1st Division, OCS Block Polygons - 2nd Division, OCS Gulf of Mexico NAD27 Block Polygons - 2nd Division, Aliquot 16ths Polygons - 3rd Division, and OCS Withdrawal Areas.,All polygons are clipped to the Submerged Land Act Boundary and Continental Shelf Boundaries reflecting federal jurisdiction. The Withdrawals depict areas that are permanently or temporarily withdrawn from Outer Continental Shelf leasing or one or all the resources that BOEM manages. The NAD27 Gulf of Mexico Protractions and Blocks have a different protraction and block configuration when compared to the OCS Protraction Polygons - 1st Division and OCS Block Polygons - 2nd Division. The NAD27 Gulf of Mexico data is used for Oil and Gas leasing.,These data were created in the applicable NAD83 UTM or NAD27 UTM/SPCS Projection and re-projected to GCS WGS84 (EPSG 4326) for management in BOEM's enterprise GIS. However, the services in this collection have been published in WGS 1984 Web Mercator Auxiliary Sphere (EPSG 3857). Because GIS projection and topology functions can change or generalize coordinates, these data are NOT an OFFICIAL record for the exact boundaries. These data are to be used for Cartographic purposes only and should not be used to calculate area.,Layers Metadata,OCS BOEM Offshore Boundary Lines,OCS Protraction Polygons - 1st Division,OCS Gulf of Mexico NAD27 Protraction Polygons - 1st Division,OCS Block Polygons - 2nd Division,OCS Gulf of Mexico NAD27 Block Polygons - 2nd Division,Aliquot 16ths Polygons - 3rd Division,OCS Withdrawal Areas,

,This is a national data collection of data resources managed by the Bureau of Ocean Energy Management (BOEM) for the Outer Continental Shelf (OCS). The data collection is designated as a National Geospatial Data Asset (NGDA) and includes: OCS BOEM Offshore Boundary Lines (Submerged Lands Act Boundary, OCSLA Limit of “8(g) Zone,” and Continental Shelf Boundary), OCS Protraction Polygons - 1st Division, OCS Gulf of Mexico NAD27 Protraction Polygons - 1st Division, OCS Block Polygons - 2nd Division, OCS Gulf of Mexico NAD27 Block Polygons - 2nd Division, and Aliquot 16ths Polygons - 3rd Division.,,All polygons are clipped to the Submerged Land Act Boundary and Continental Shelf Boundaries reflecting federal jurisdiction. The NAD27 Gulf of Mexico Protractions and Blocks have a different protraction and block configuration when compared to the OCS Protraction Polygons - 1st Division and OCS Block Polygons - 2nd Division. The NAD27 Gulf of Mexico data is used for Oil and Gas leasing.,,These data were created in the applicable NAD83 UTM or NAD27 UTM/SPCS Projection and re-projected to GCS WGS84 (EPSG 4326) for management in BOEM"s enterprise GIS. However, the services in this collection have been published in WGS 1984 Web Mercator Auxiliary Sphere (EPSG 3857). Because GIS projection and topology functions can change or generalize coordinates,these data are NOT an OFFICIAL record for the exact boundaries. These data are to be used for Cartographic purposes only and should not be used to calculate area.,Layers Metadata,OCS BOEM Offshore Boundary Lines,OCS Protraction Polygons - 1st Division,OCS Gulf of Mexico NAD27 Protraction Polygons - 1st Division,OCS Block Polygons - 2nd Division,OCS Gulf of Mexico NAD27 Block Polygons - 2nd Division,Aliquot 16ths Polygons - 3rd Division,

This data set contains Continental Shelf Boundaries (CSB) lines in ESRI shapefile format for the BOEM Alaska Region. The CSB defines the seaward limit of federally managed OCS lands. This CSB file only includes the lateral boundaries between the United States and Canada or Russia. That portion of the CSB defined by the 200 nautical mile line has not yet been calculated. Because GIS projection and topology functions can change or generalize coordinates, these GIS files are NOT an OFFICIAL record for the exact CSB.

This data set contains Continental Shelf Boundary (CSB) lines in ESRI Arc/Info export and Arc/View shape file formats for the BOEM Pacific Region. The CSB defines the seaward limit of federally managed OCS lands. This CSB file only includes the lateral boundaries between the United States and Canada or Mexico. That portion of the CSB defined by the 200 nautical mile line has not yet been calculated. Because GIS projection and topology functions can change or generalize coordinates, these GIS files are NOT an OFFICIAL record for the exact CSB.

,