This layer represents the boundaries for the following counties: Travis, Williamson, Hays, Burnet, Caldwell, Blanco, Lee, Fayette, Bastrop, and Llano. Terms of Use This product is for informational purposes and may not have been prepared for or be suitable for legal, engineering, or surveying purposes. It does not represent an on-the-ground survey and represents only the approximate relative location of property boundaries. This product has been produced by the City of Austin for the sole purpose of geographic reference. No warranty is made by the City of Austin regarding specific accuracy or completeness.

The digital Suburb/Locality Boundaries and their legal identifiers have been derived from the cadastre data from each state and territory jurisdiction and are available below. Suburb/Locality Boundaries are part of Geoscape Administrative Boundaries, which is built and maintained by [Geoscape Australia](https://geoscape.com.au/) using authoritative government data. Further information about contributors to Administrative Boundaries is available [here](https://geoscape.com.au/legal/data-copyright-and-disclaimer/). The full Administrative Boundaries dataset comprises seven Geoscape products: * Localities * Local Government Areas (LGAs) * Wards * Australian Bureau of Statistics (ABS) Boundaries, * Electoral Boundaries * State Boundaries and * Town Points Updated versions of Administrative Boundaries are published on a quarterly basis. Users have the option to download datasets with feature coordinates referencing either GDA94 or GDA2020 datums. **There were no updates in the February 2025 release** Further information on Administrative Boundaries, including FAQs on the data, is available [here](https://geoscape.com.au/data/administrative-boundaries/) through Geoscape Australia’s network of [partners](https://geoscape.com.au/partners/). They provide a range of commercial products based on Administrative Boundaries, including software solutions, consultancy and support. Note: On 1 October 2020, PSMA Australia Limited began trading as Geoscape Australia. ## License Information The Australian Government has negotiated the release of Administrative Boundaries to the whole economy under an [open CCBY 4.0 license](https://creativecommons.org/licenses/by/4.0/). Users must only use the data in ways that are consistent with the Australian Privacy Principles issued under the Privacy Act 1988 (Cth). **Users must also note the following attribution requirements:** _Preferred attribution for the Licensed Material:_ > _Administrative Boundaries © [Geoscape Australia](https://geoscape.com.au/legal/data-copyright-and-disclaimer/) licensed by the Commonwealth of Australia under_ [_Creative Commons Attribution 4.0 International licence (CC BY 4.0)_](https://creativecommons.org/licenses/by/4.0/). _Preferred attribution for Adapted Material:_ > _Incorporates or developed using Administrative Boundaries © [Geoscape Australia](https://geoscape.com.au/legal/data-copyright-and-disclaimer/) licensed by the Commonwealth of Australia under_ [_Creative Commons Attribution 4.0 International licence (CC BY 4.0)_](https://creativecommons.org/licenses/by/4.0/).

The ACT Boundary is a single region defined for land administration and the legal description of the Australian Capital Territory. The ACT boundary are defined in metes and bounds form in the Districts Act 1966, and thus cannot be changed without changes to the legislation. The ACT Border was first defined by surveyors between 1910 and 1915, it was redefined by surveyors again between 2003 and 2008. The original border is defined by metes and bounds description in the Seat of Governance ACT 1909, the current ACT Border definition is shown on survey plans held at the ACT Environment and Planning Directorate (EPD). Creative Commons License Creative Common By Attribution 4.0 (Australian Capital Territory), Please read Data Terms and Conditions statement before data use.

The 2024 cartographic boundary KMLs are simplified representations of selected geographic areas from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). These boundary files are specifically designed for small-scale thematic mapping. When possible, generalization is performed with the intent to maintain the hierarchical relationships among geographies and to maintain the alignment of geographies within a file set for a given year. Geographic areas may not align with the same areas from another year. Some geographies are available as nation-based files while others are available only as state-based files. County subdivisions are the primary divisions of counties and their equivalent entities for the reporting of Census Bureau data. They include legally-recognized minor civil divisions (MCDs) and statistical census county divisions (CCDs), and unorganized territories. In MCD states where no MCD exists or no MCD is defined, the Census Bureau creates statistical unorganized territories to complete coverage. The entire area of the United States, Puerto Rico, and the Island Areas are covered by county subdivisions. The generalized boundaries of legal MCDs are based on those as of January 1, 2024, as reported through the Census Bureau's Boundary and Annexation Survey (BAS). The generalized boundaries of all CCDs, delineated in 21 states, are based on those as reported as part of the Census Bureau's Participant Statistical Areas Program (PSAP) for the 2020 Census.

The 2023 cartographic boundary KMLs are simplified representations of selected geographic areas from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). These boundary files are specifically designed for small-scale thematic mapping. When possible, generalization is performed with the intent to maintain the hierarchical relationships among geographies and to maintain the alignment of geographies within a file set for a given year. Geographic areas may not align with the same areas from another year. Some geographies are available as nation-based files while others are available only as state-based files. County subdivisions are the primary divisions of counties and their equivalent entities for the reporting of Census Bureau data. They include legally-recognized minor civil divisions (MCDs) and statistical census county divisions (CCDs), and unorganized territories. In MCD states where no MCD exists or no MCD is defined, the Census Bureau creates statistical unorganized territories to complete coverage. The entire area of the United States, Puerto Rico, and the Island Areas are covered by county subdivisions. The generalized boundaries of legal MCDs are based on those as of January 1, 2023, as reported through the Census Bureau's Boundary and Annexation Survey (BAS). The generalized boundaries of all CCDs, delineated in 21 states, are based on those as reported as part of the Census Bureau's Participant Statistical Areas Program (PSAP) for the 2020 Census.

The digital Suburb/Locality Boundaries and their legal identifiers have been derived from the cadastre data from each state and territory jurisdiction and are available below. Suburb/Locality Boundaries are part of Geoscape Administrative Boundaries, which is built and maintained by [Geoscape Australia](https://geoscape.com.au/) using authoritative government data. Further information about contributors to Administrative Boundaries is available [here](https://geoscape.com.au/legal/data-copyright-and-disclaimer/). The full Administrative Boundaries dataset comprises seven Geoscape products: * Localities * Local Government Areas (LGAs) * Wards * Australian Bureau of Statistics (ABS) Boundaries, * Electoral Boundaries * State Boundaries and * Town Points Updated versions of Administrative Boundaries are published on a quarterly basis. Users have the option to download datasets with feature coordinates referencing either GDA94 or GDA2020 datums. **There were no updates in the February 2025 release** **Notable changes in the August 2021 release:** * The Localities, Local Government Areas and Wards products have been redesigned to provide a new flattened data model, offering a simpler, easier-to-use structure. This will also: - change the composition of identifiers in these products. - provide state identifiers as an abbreviation (eg. NSW) rather than a code. - remove the static SA “Hundreds” data from Localities. * More information on the changes to Localities, Local Government Areas and Wards is available [here](https://geoscape.com.au/wp-content/uploads/2021/07/Geoscape-LGA-Localities-Wards-Design-Concepts.pdf). * The Australian Bureau of Statistics (ABS) Boundaries will be updated to include the 2021 Australian Statistical Geography Standard (ASGS). * Further information on the August changes to Geoscape datasets is available [here](https://geoscape.com.au/wp-content/uploads/2021/07/Product_Change_Notification_August_2021.pdf). Further information on Administrative Boundaries, including FAQs on the data, is available [here](https://geoscape.com.au/data/administrative-boundaries/) through Geoscape Australia’s network of [partners](https://geoscape.com.au/partners/). They provide a range of commercial products based on Administrative Boundaries, including software solutions, consultancy and support. Note: On 1 October 2020, PSMA Australia Limited began trading as Geoscape Australia. ## License Information The Australian Government has negotiated the release of Administrative Boundaries to the whole economy under an [open CCBY 4.0 license](https://creativecommons.org/licenses/by/4.0/). Users must only use the data in ways that are consistent with the Australian Privacy Principles issued under the Privacy Act 1988 (Cth). **Users must also note the following attribution requirements:** _Preferred attribution for the Licensed Material:_ > _Administrative Boundaries © [Geoscape Australia](https://geoscape.com.au/legal/data-copyright-and-disclaimer/) licensed by the Commonwealth of Australia under_ [_Creative Commons Attribution 4.0 International licence (CC BY 4.0)_](https://creativecommons.org/licenses/by/4.0/). _Preferred attribution for Adapted Material:_ > _Incorporates or developed using Administrative Boundaries © [Geoscape Australia](https://geoscape.com.au/legal/data-copyright-and-disclaimer/) licensed by the Commonwealth of Australia under_ [_Creative Commons Attribution 4.0 International licence (CC BY 4.0)_](https://creativecommons.org/licenses/by/4.0/).

The digital Suburb/Locality Boundaries and their legal identifiers have been derived from the cadastre data from each state and territory jurisdiction and are available below. Suburb/Locality Boundaries are part of Geoscape Administrative Boundaries, which is built and maintained by [Geoscape Australia](https://geoscape.com.au/) using authoritative government data. Further information about contributors to Administrative Boundaries is available [here](https://geoscape.com.au/legal/data-copyright-and-disclaimer/). The full Administrative Boundaries dataset comprises seven Geoscape products: * Localities * Local Government Areas (LGAs) * Wards * Australian Bureau of Statistics (ABS) Boundaries, * Electoral Boundaries * State Boundaries and * Town Points Updated versions of Administrative Boundaries are published on a quarterly basis. Users have the option to download datasets with feature coordinates referencing either GDA94 or GDA2020 datums. **Notable changes in the February 2025 release** * There have been spatial changes (area) greater than 1 km2 to the localities ‘Koombooloomba’, ‘Isisford’, ‘Ilfracombe’ and ‘Glen Ruth’. Further information on Administrative Boundaries, including FAQs on the data, is available [here](https://geoscape.com.au/data/administrative-boundaries/) through Geoscape Australia’s network of [partners](https://geoscape.com.au/partners/). They provide a range of commercial products based on Administrative Boundaries, including software solutions, consultancy and support. Note: On 1 October 2020, PSMA Australia Limited began trading as Geoscape Australia. ## License Information The Australian Government has negotiated the release of Administrative Boundaries to the whole economy under an [open CCBY 4.0 license](https://creativecommons.org/licenses/by/4.0/). Users must only use the data in ways that are consistent with the Australian Privacy Principles issued under the Privacy Act 1988 (Cth). **Users must also note the following attribution requirements:** _Preferred attribution for the Licensed Material:_ > _Administrative Boundaries © [Geoscape Australia](https://geoscape.com.au/legal/data-copyright-and-disclaimer/) licensed by the Commonwealth of Australia under_ [_Creative Commons Attribution 4.0 International licence (CC BY 4.0)_](https://creativecommons.org/licenses/by/4.0/). _Preferred attribution for Adapted Material:_ > _Incorporates or developed using Administrative Boundaries © [Geoscape Australia](https://geoscape.com.au/legal/data-copyright-and-disclaimer/) licensed by the Commonwealth of Australia under_ [_Creative Commons Attribution 4.0 International licence (CC BY 4.0)_](https://creativecommons.org/licenses/by/4.0/).

The digital Suburb/Locality Boundaries and their legal identifiers have been derived from the cadastre data from each state and territory jurisdiction and are available below. Suburb/Locality Boundaries are part of Geoscape Administrative Boundaries, which is built and maintained by [Geoscape Australia](https://geoscape.com.au/) using authoritative government data. Further information about contributors to Administrative Boundaries is available [here](https://geoscape.com.au/legal/data-copyright-and-disclaimer/). The full Administrative Boundaries dataset comprises seven Geoscape products: * Localities * Local Government Areas (LGAs) * Wards * Australian Bureau of Statistics (ABS) Boundaries, * Electoral Boundaries * State Boundaries and * Town Points Updated versions of Administrative Boundaries are published on a quarterly basis. Users have the option to download datasets with feature coordinates referencing either GDA94 or GDA2020 datums. **There were no updates in the February 2025 release** Further information on Administrative Boundaries, including FAQs on the data, is available [here](https://geoscape.com.au/data/administrative-boundaries/) through Geoscape Australia’s network of [partners](https://geoscape.com.au/partners/). They provide a range of commercial products based on Administrative Boundaries, including software solutions, consultancy and support. Note: On 1 October 2020, PSMA Australia Limited began trading as Geoscape Australia. ## License Information The Australian Government has negotiated the release of Administrative Boundaries to the whole economy under an [open CCBY 4.0 license](https://creativecommons.org/licenses/by/4.0/). Users must only use the data in ways that are consistent with the Australian Privacy Principles issued under the Privacy Act 1988 (Cth). **Users must also note the following attribution requirements:** _Preferred attribution for the Licensed Material:_ > _Administrative Boundaries © [Geoscape Australia](https://geoscape.com.au/legal/data-copyright-and-disclaimer/) licensed by the Commonwealth of Australia under_ [_Creative Commons Attribution 4.0 International licence (CC BY 4.0)_](https://creativecommons.org/licenses/by/4.0/). _Preferred attribution for Adapted Material:_ > _Incorporates or developed using Administrative Boundaries © [Geoscape Australia](https://geoscape.com.au/legal/data-copyright-and-disclaimer/) licensed by the Commonwealth of Australia under_ [_Creative Commons Attribution 4.0 International licence (CC BY 4.0)_](https://creativecommons.org/licenses/by/4.0/).

Property boundaries represent the extent of ownership of an address in line with NSW Valuer General for the purposes of address verification and rating. The spatial layer is derived from land parcel boundaries (cadastre) originally supplied by NSW Spatial Services who remain the source of cadastral information. See SiX maps This spatial layer has been significantly changed and maintained by City of Sydney Spatial Services. This layer is not survey accurate. Geoservice API disabled, but geojson and download permitted.

The ACT Districts Boundaries are a region defined for land administration and the legal description of land parcels. In urban areas districts contain divisions, sections and blocks. In rural areas they contain blocks only. The boundaries of districts are defined in metes and bounds form in the Districts Act 1966, and thus cannot be changed without changes to the legislation. Creative Commons License Creative Common By Attribution 4.0 (Australian Capital Territory), Please read Data Terms and Conditions statement before data use.