The CAMEX-4 NOAA WP-3D Cloud Physics dataset used the NOAA WP-3D Orion aircraft, which has multiple meteorological and microphysical sensors. These include, for example, cloud particle imagers and temperature and dewpoint probes. CAMEX-4 focused on the study of tropical cyclone (hurricane) development, tracking, intensification, and landfalling impacts using NASA-funded aircraft and surface remote sensing instrumentation. This dataset includes navigation data as well as the meteorological and microphysical data. For further information and to obtain this data, please contact GHRC at support-ghrc@earthdata.nasa.gov

The CAMEX-4 Aerosonde dataset contains temperature, humidity, and atmospheric pressure measurements collected to study the boundary layer below levels where traditional hurricane reconnasissance aircaft fly. The Aerosonde is an unmanned aerial vehicle with a wingspan of 2.9 meters (~9 feet) weighing approximately 14 kg (~31 lbs). Carrying a payload of air pressure, temperature and humidity probes, the aircraft can fly at altitudes from near the surface to 21,000 feet at speeds of 50-95 mph for periods of up to 30 hours. Controlled by dual computers and navigated by GPS, the Aerosonde is designed to economically collect meteorological data over a wide area.

DC3_Miscellaneous_NSF-GV-HIAPER_Data are miscellaneous data collected onboard the DC-8 aircraft during the Deep Convective Clouds and Chemistry (DC3) field campaign. This product features data from the Global Forecast System (GFS) model. Data collection for this product is complete.The Deep Convective Clouds and Chemistry (DC3) field campaign sought to understand the dynamical, physical, and lightning processes of deep, mid-latitude continental convective clouds and to define the impact of these clouds on upper tropospheric composition and chemistry. DC3 was conducted from May to June 2012 with a base location of Salina, Kansas. Observations were conducted in northeastern Colorado, west Texas to central Oklahoma, and northern Alabama in order to provide a wide geographic sample of storm types and boundary layer compositions, as well as to sample convection.DC3 had two primary science objectives. The first was to investigate storm dynamics and physics, lightning and its production of nitrogen oxides, cloud hydrometeor effects on wet deposition of species, surface emission variability, and chemistry in anvil clouds. Observations related to this objective focused on the early stages of active convection. The second objective was to investigate changes in upper tropospheric chemistry and composition after active convection. Observations related to this objective focused on the 12-48 hours following convection. This objective also served to explore seasonal change of upper tropospheric chemistry.In addition to using the NSF/NCAR Gulfstream-V (GV) aircraft, the NASA DC-8 was used during DC3 to provide in-situ measurements of the convective storm inflow and remotely-sensed measurements used for flight planning and column characterization. DC3 utilized ground-based radar networks spread across its observation area to measure the physical and kinematic characteristics of storms. Additional sampling strategies relied on lightning mapping arrays, radiosondes, and precipitation collection. Lastly, DC3 used data collected from various satellite instruments to achieve its goals, focusing on measurements from CALIOP onboard CALIPSO and CPL onboard CloudSat. In addition to providing an extensive set of data related to deep, mid-latitude continental convective clouds and analyzing their impacts on upper tropospheric composition and chemistry, DC3 improved models used to predict convective transport. DC3 improved knowledge of convection and chemistry, and provided information necessary to understanding the processes relating to ozone in the upper troposphere.

The CAMEX-4 DC-8 Dropsonde System dataset was collected by the DC-8 Dropsonde System (D8D) uses dropwindsonde and Global Positioning System (GPS) receivers to measure the atmospheric state parameters (temperature, humidity, windspeed/direction, pressure, and location in 3 dimensional space during the sonde's descent once each half second. Measurements are transmitted to the aircraft from the time of release until impact with the ocean's surface.

This data set contains measurements from the NOAA/ATDD Long-EZ Aircraft collected during the 1994 IFCs at the SSA. These measurements were made from various instruments mounted on the aircraft. The data that were collected include: aircraft altitude, wind direction, wind speed, air temperature, potential temperature, water mixing ratio, U and V components of wind velocity, static pressure, surface radiative temperature, downwelling and upwelling total radiation, downwelling and upwelling longwave radiation, net radiation, downwelling and upwelling PAR, greenness index, CO2 concentration, O3 concentration, and CH4 concentration. There are also various columns that indicate the standard deviation, skewness, kurtosis, and trend of some of these data.

DC3_Miscellaneous_DC8_Data are miscellaneous data collected onboard the DC-8 aircraft during the Deep Convective Clouds and Chemistry (DC3) field campaign. This product features data from the Global Forecast System (GFS) model. Data collection for this product is complete.The Deep Convective Clouds and Chemistry (DC3) field campaign sought to understand the dynamical, physical, and lightning processes of deep, mid-latitude continental convective clouds and to define the impact of these clouds on upper tropospheric composition and chemistry. DC3 was conducted from May to June 2012 with a base location of Salina, Kansas. Observations were conducted in northeastern Colorado, west Texas to central Oklahoma, and northern Alabama in order to provide a wide geographic sample of storm types and boundary layer compositions, as well as to sample convection.DC3 had two primary science objectives. The first was to investigate storm dynamics and physics, lightning and its production of nitrogen oxides, cloud hydrometeor effects on wet deposition of species, surface emission variability, and chemistry in anvil clouds. Observations related to this objective focused on the early stages of active convection. The second objective was to investigate changes in upper tropospheric chemistry and composition after active convection. Observations related to this objective focused on the 12-48 hours following convection. This objective also served to explore seasonal change of upper tropospheric chemistry.In addition to using the NSF/NCAR Gulfstream-V (GV) aircraft, the NASA DC-8 was used during DC3 to provide in-situ measurements of the convective storm inflow and remotely-sensed measurements used for flight planning and column characterization. DC3 utilized ground-based radar networks spread across its observation area to measure the physical and kinematic characteristics of storms. Additional sampling strategies relied on lightning mapping arrays, radiosondes, and precipitation collection. Lastly, DC3 used data collected from various satellite instruments to achieve its goals, focusing on measurements from CALIOP onboard CALIPSO and CPL onboard CloudSat. In addition to providing an extensive set of data related to deep, mid-latitude continental convective clouds and analyzing their impacts on upper tropospheric composition and chemistry, DC3 improved models used to predict convective transport. DC3 improved knowledge of convection and chemistry, and provided information necessary to understanding the processes relating to ozone in the upper troposphere.

MACPEX_MetNav_AircraftInSitu_WB57_Data is the in-situ meteorology and navigational data collection during the Mid-latitude Airborne Cirrus Properties Experiment (MACPEX). Data from the Meteorological Measurement System (MMS) is featured in this collection. Data collection for this product is complete.The MACPEX mission was an airborne field campaign that deployed from March 18th to April 26th, 2011. MACPEX sought to investigate cirrus cloud properties and the processes that affect their impact on radiation. The campaign conducted science flights using the NASA WB-57 aircraft based out of Ellington Airfield, Texas. Science flights were focused on the central North America vicinity, with an emphasis over the Southern Great Plains atmospheric observatory (established by the Department of Energy’s (DoE) Atmospheric Radiation Measurement (ARM) user facility) site in Oklahoma. MACPEX was a joint effort between NASA, the NOAA Earth System Research Laboratory (ESRL), the National Center for Atmospheric Research (NCAR), and several U.S. universities.The WB-57 contained a comprehensive instrument payload for detailed in-situ measurements that were targeted to answer MACPEX’s four major science questions. The first science question that MACPEX explored was how prevalent the smaller crystals are in cirrus clouds, and how important they are for extinction, radiative forcing, and radiative heating. MACPEX also sought to understand how cirrus microphysical properties (particle size distribution, ice crystal habit, extinction, ice water content) are related to the dynamical forcing driving cloud formation. Researchers also investigated how cirrus microphysical properties are related to aerosol loading and composition, including the abundance of heterogeneous ice nuclei. Lastly, this campaign examined how cirrus microphysical properties evolve through the lifecycles of the clouds, and the role radiatively driven dynamical motions play.In addition to the in-situ measurements, four flights were coordinated to validate the NASA EOS/A-Train satellite observations. NOAA also launched balloon sondes and ozonesondes, which were used to acquire data about the frost point and water vapor in the atmosphere. The balloon sondes and ozonesondes also acquired pressure, temperature, and humidity data, as well as measurements regarding the ozone in the atmosphere.

The CAMEX-4 ER-2 High Altitude Dropsonde dataset was collected by the ER-2 High Altitude Dropsonde System (EHAD), which used dropwinsondes fitted with Global Positioning System (GPS) receivers to measure the atmospheric state parameters (temp, humidity, windspeed/direction, pressure) and location in 3 dimensional space during the sonde's descent once each half second. Measurements was transmitted to the aircraft from the time of release until impact with the ocean's surface.