Chlorophyll-a is a widely used proxy for phytoplankton biomass and an indicator for changes in phytoplankton production. As an essential source of energy in the marine environment, the extent and availability of phytoplankton biomass can be highly influential for fisheries production and dictate trophic structure in marine ecosystems. Changes in phytoplankton biomass are predominantly effected by changes in nutrient availability, through either natural (e.g., turbulent ocean mixing) or anthropogenic (e.g., agricultural runoff) processes. This layer represents the mean of the 8-day time series of chlorophyll-a (mg/m3) from 2002-2013. Monthly and 8-day 4-km (0.0417-degree) spatial resolution data were obtained from the MODIS (Moderate-resolution Imaging Spectroradiometer) Aqua satellite instrument from the NASA OceanColor website (http://oceancolor.gsfc.nasa.gov). The long-term mean was calculated by taking the average of all 8-day data from 2002-2013 for each pixel. A quality control mask was applied to remove spurious data associated with shallow water, following Gove et al., 2013. Nearshore map pixels with no data were filled with values from the nearest neighboring valid offshore pixel by using a grid of points and the Near Analysis tool in ArcGIS then converting points to raster.

Chlorophyll-a, is a widely used proxy for phytoplankton biomass and an indicator for changes in phytoplankton production. As an essential source of energy in the marine environment, the extent and availability of phytoplankton biomass can be highly influential for fisheries production and dictate trophic structure in marine ecosystems. Changes in phytoplankton biomass are predominantly effected by changes in nutrient availability, through either natural (e.g., turbulent ocean mixing) or anthropogenic (e.g., agricultural runoff) processes. This layer represents the standard deviation of the 8-day time series of chlorophyll-a (mg/m3) from 1998-2018. Data products generated by the Ocean Colour component of the European Space Agency (ESA) Climate Change Initiative (CCI) project. These files are 8-day 4-km composites of merged sensor products: Global Area Coverage (GAC), Local Area Coverage (LAC), MEdium Resolution Imaging Spectrometer (MERIS), Moderate Resolution Imaging Spectroradiometer (MODIS) Aqua, Ocean and Land Colour Instrument (OLCI), Sea-viewing Wide Field-of-view Sensor (SeaWiFS), and Visible Infrared Imaging Radiometer Suite (VIIRS). The standard deviation was calculated over all 8-day chlorophyll-a data from 1998-2018 for each pixel. A quality control mask was applied to remove spurious data associated with shallow water, following Gove et al., 2013. Nearshore map pixels with no data were filled with values from the nearest neighboring valid offshore pixel by using a grid of points and the Near Analysis tool in ArcGIS then converting points to raster. Data source: https://oceanwatch.pifsc.noaa.gov/erddap/griddap/esa-cci-chla-8d-v5-0.graph

Chlorophyll-a is a widely used proxy for phytoplankton biomass and an indicator for changes in phytoplankton production. As an essential source of energy in the marine environment, the extent and availability of phytoplankton biomass can be highly influential for fisheries production and dictate trophic structure in marine ecosystems. Changes in phytoplankton biomass are predominantly effected by changes in nutrient availability, through either natural (e.g., turbulent ocean mixing) or anthropogenic (e.g., agricultural runoff) processes. This layer represents the standard deviation of the 8-day time series of chlorophyll-a (mg/m3) from 2002-2013. Monthly and 8-day 4-km (0.0417-degree) spatial resolution data were obtained from the MODIS (Moderate-resolution Imaging Spectroradiometer) Aqua satellite instrument from the NASA OceanColor website (http://oceancolor.gsfc.nasa.gov). The standard deviation was calculated over all 8-day chlorophyll-a data from 2002-2013 for each pixel. A quality control mask was applied to remove spurious data associated with shallow water, following Gove et al., 2013. Nearshore map pixels with no data were filled with values from the nearest neighboring valid offshore pixel by using a grid of points and the Near Analysis tool in ArcGIS then converting points to raster.

Chlorophyll-a, is a widely used proxy for phytoplankton biomass and an indicator for changes in phytoplankton production. As an essential source of energy in the marine environment, the extent and availability of phytoplankton biomass can be highly influential for fisheries production and dictate trophic structure in marine ecosystems. Changes in phytoplankton biomass are predominantly effected by changes in nutrient availability, through either natural (e.g., turbulent ocean mixing) or anthropogenic (e.g., agricultural runoff) processes. This layer represents the maximum monthly climatological mean of chlorophyll-a (mg/m3) from 1998-2018. Data products generated by the Ocean Colour component of the European Space Agency (ESA) Climate Change Initiative (CCI) project. These files are 8-day 4-km composites of merged sensor products: Global Area Coverage (GAC), Local Area Coverage (LAC), MEdium Resolution Imaging Spectrometer (MERIS), Moderate Resolution Imaging Spectroradiometer (MODIS) Aqua, Ocean and Land Colour Instrument (OLCI), Sea-viewing Wide Field-of-view Sensor (SeaWiFS), and Visible Infrared Imaging Radiometer Suite (VIIRS). A quality control mask was applied to remove spurious data associated with shallow water, following Gove et al., 2013. Monthly climatologies were calculated from monthly time series averaging for all same-months (e.g., January). Nearshore map pixels with no data were filled with values from the nearest neighboring valid offshore pixel by using a grid of points and the Near Analysis tool in ArcGIS then converting points to raster. Data source: https://oceanwatch.pifsc.noaa.gov/erddap/griddap/esa-cci-chla-8d-v5-0.graph

Chlorophyll-a, is a widely used proxy for phytoplankton biomass and an indicator for changes in phytoplankton production. As an essential source of energy in the marine environment, the extent and availability of phytoplankton biomass can be highly influential for fisheries production and dictate trophic structure in marine ecosystems. Changes in phytoplankton biomass are predominantly effected by changes in nutrient availability, through either natural (e.g., turbulent ocean mixing) or anthropogenic (e.g., agricultural runoff) processes. This layer represents the annual average of the maximum anomaly of chlorophyll-a (mg/m3) from 1998-2018. Data products generated by the Ocean Colour component of the European Space Agency (ESA) Climate Change Initiative (CCI) project. These files are 8-day 4-km composites of merged sensor products: Global Area Coverage (GAC), Local Area Coverage (LAC), MEdium Resolution Imaging Spectrometer (MERIS), Moderate Resolution Imaging Spectroradiometer (MODIS) Aqua, Ocean and Land Colour Instrument (OLCI), Sea-viewing Wide Field-of-view Sensor (SeaWiFS), and Visible Infrared Imaging Radiometer Suite (VIIRS). The chlorophyll-a average annual maximum anomaly was calculated by taking the average of the chlorophyll-a values from the 8-day time series in exceedance of the maximum monthly climatological chlorophyll-a from 1998-2018 for each pixel. A quality control mask was applied to remove spurious data associated with shallow water, following Gove et al., 2013. Time series of anomalies were calculated by quantifying the number and magnitude of events from the 8-day time series that exceed the maximum climatological monthly mean. Nearshore map pixels with no data were filled with values from the nearest neighboring valid offshore pixel by using a grid of points and the Near Analysis tool in ArcGIS then converting points to raster. Data source: https://oceanwatch.pifsc.noaa.gov/erddap/griddap/esa-cci-chla-8d-v5-0.graph

Chlorophyll-a is a widely used proxy for phytoplankton biomass and an indicator for changes in phytoplankton production. As an essential source of energy in the marine environment, the extent and availability of phytoplankton biomass can be highly influential for fisheries production and dictate trophic structure in marine ecosystems. Changes in phytoplankton biomass are predominantly effected by changes in nutrient availability, through either natural (e.g., turbulent ocean mixing) or anthropogenic (e.g., agricultural runoff) processes. This layer represents the annual average of the maximum anomaly of chlorophyll-a (mg/m3) from 2002-2013. Monthly and 8-day 4-km (0.0417-degree) spatial resolution data were obtained from the MODIS (Moderate-resolution Imaging Spectroradiometer) Aqua satellite instrument from the NASA OceanColor website (http://oceancolor.gsfc.nasa.gov). The chlorophyll-a average annual maximum anomaly was calculated by taking the average of the chlorophyll-a values from the 8-day time series in exceedance of the maximum monthly climatological chlorophyll-a from 2002-2013 for each pixel. A quality control mask was applied to remove spurious data associated with shallow water, following Gove et al., 2013. Monthly Climatologies were calculated from monthly time series using only full years over the Ocean Tipping Points (OTP) project time frame of interest (2002-2013). Time series of anomalies were calculated by quantifying the number and magnitude of events from the 8-day time series that exceed the maximum climatological monthly mean. Nearshore map pixels with no data were filled with values from the nearest neighboring valid offshore pixel by using a grid of points and the Near Analysis tool in ArcGIS then converting points to raster.

Chlorophyll-a, is a widely used proxy for phytoplankton biomass and an indicator for changes in phytoplankton production. As an essential source of energy in the marine environment, the extent and availability of phytoplankton biomass can be highly influential for fisheries production and dictate trophic structure in marine ecosystems. Changes in phytoplankton biomass are predominantly effected by changes in nutrient availability, through either natural (e.g., turbulent ocean mixing) or anthropogenic (e.g., agricultural runoff) processes. This layer represents the annual average number of anomalies of chlorophyll-a (mg/m3) from 1998-2018, with values presented as fraction of a year. Data products generated by the Ocean Colour component of the European Space Agency (ESA) Climate Change Initiative (CCI) project. These files are 8-day 4-km composites of merged sensor products: Global Area Coverage (GAC), Local Area Coverage (LAC), MEdium Resolution Imaging Spectrometer (MERIS), Moderate Resolution Imaging Spectroradiometer (MODIS) Aqua, Ocean and Land Colour Instrument (OLCI), Sea-viewing Wide Field-of-view Sensor (SeaWiFS), and Visible Infrared Imaging Radiometer Suite (VIIRS). The chlorophyll-a average annual frequency of anomalies was calculated by taking the average number of times that the 8-day time series exceeded the maximum monthly climatological chlorophyll-a value from 1998-2018 for each pixel. A quality control mask was applied to remove spurious data associated with shallow water, following Gove et al., 2013. Nearshore map pixels with no data were filled with values from the nearest neighboring valid offshore pixel by using a grid of points and the Near Analysis tool in ArcGIS then converting points to raster. Data source: https://oceanwatch.pifsc.noaa.gov/erddap/griddap/esa-cci-chla-8d-v5-0.graph

Sea surface temperature (SST) plays an important role in a number of ecological processes and can vary over a wide range of time scales, from daily to decadal changes. SST influences primary production, species migration patterns, and coral health. If temperatures are anomalously warm for extended periods, drastic changes in the surrounding ecosystem can result, including harmful effects such as coral bleaching. This layer represents the mean SST (degrees Celsius) of the weekly time series from 1985-2018. These SST dataset are derived from CoralTemp 5-km gap-free analyzed blended sea surface temperature over the global ocean. CoralTemp is derived from three different but related 5-km daily gap-free SST data sets and provides an internally consistent SST product that stretches from 1985 to present. 1) Operational Sea Surface Temperature and Sea Ice Analysis (OSTIA) Sea Surface Temperature Reanalysis (1985-2002). 2) Geo-Polar Blended Night-Only Sea Surface Temperature Reanalysis (2002-2016). 3) Geo-Polar Blended Night-Only Sea Surface Temperature Near Real-Time (2017 to present). The 8-day composites are generated from daily Coral Reef Watch (CRW) files by OceanWatch Central Pacific. The SST long-term mean was calculated by taking the average of all weekly data from 1985-2018 for each pixel. Data source: https://oceanwatch.pifsc.noaa.gov/erddap/griddap/CRW_sst_v1_0_8day.graph

Coastal habitats are utilized and altered for a suite of human uses. Habitat modification is here defined as the alteration or removal of geomorphic structure as a result of human use. This includes several habitat-modifying features like seawalls, piers, breakwaters, dredged areas, artificial land (i.e., filled wetlands), and offshore structures. This data layer represents the presence of habitat modification in shallow waters of American Samoa. The presence of habitat-modifying features were mapped by combining several existing datasets derived primarily from satellite and aerial imagery, including the following datasets: benthic habitat maps (NOAA Center for Coastal Monitoring and Assessment (CCMA), 2005); and NOAA Environmental Sensitivity Index (ESI) line data (NOAA Office of Response and Restoration (OR&R), 2003). The layer represents the presence or absence of habitat modification, with a cell size of 250 m. Relevant man-made features were extracted from each individual dataset and saved (features classified as artificial and dredged areas in NOAA benthic habitat maps; coastal segments designated as man-made structures and riprap in NOAA ESI line data). The resulting polygon datasets were merged together. A field was added to all vector layers with a value of 1 for each feature to represent the presence of habitat modification. Vector data were then converted to 250-m rasters and combined into a mosaic.

Chlorophyll-a is a widely used proxy for phytoplankton biomass and an indicator for changes in phytoplankton production. As an essential source of energy in the marine environment, the extent and availability of phytoplankton biomass can be highly influential for fisheries production and dictate trophic structure in marine ecosystems. Changes in phytoplankton biomass are predominantly effected by changes in nutrient availability, through either natural (e.g., turbulent ocean mixing) or anthropogenic (e.g., agricultural runoff) processes. This layer represents the annual average number of anomalies of chlorophyll-a (mg/m3) from 2002-2013, with values presented as fraction of a year. Monthly and 8-day 4-km (0.0417-degree) spatial resolution data were obtained from the MODIS (Moderate-resolution Imaging Spectroradiometer) Aqua satellite instrument from the NASA OceanColor website (http://oceancolor.gsfc.nasa.gov). The chlorophyll-a average annual frequency of anomalies was calculated by taking the average number of times that the 8-day time series exceeded the maximum monthly climatological chlorophyll-a value from 2002-2013 for each pixel. A quality control mask was applied to remove spurious data associated with shallow water, following Gove et al., 2013. Monthly climatologies were calculated from monthly time series using only full years over the Ocean Tipping Points (OTP) project time frame of interest (2002-2013). Time series of anomalies were calculated by quantifying the number and magnitude of events from the 8-day time series that exceed the maximum climatological monthly mean. Nearshore map pixels with no data were filled with values from the nearest neighboring valid offshore pixel by using a grid of points and the Near Analysis tool in ArcGIS then converting points to raster.