CPEXCV-DAWN_DC8_1 are the Doppler Aerosol WiNd lidar (DAWN) image and NetCDF data files collected during the Convective Processes Experiment - Cabo Verde (CPEX-CV) onboard the DC-8 aircraft. Data collection for this product is complete. Seeking to better understand atmospheric processes in regions with little data, the Convective Processes Experiment – Cabo Verde (CPEX-CV) campaign conducted by NASA is a continuation of the CPEX – Aerosols & Winds (CPEX-AW) campaign that took place between August to September 2021. The campaign will take place between 1-30 September 2022 and will operate out of Sal Island, Cabo Verde with the primary goal of investigating atmospheric dynamics, marine boundary layer properties, convection, the dust-laden Saharan Air Layer, and their interactions across various spatial scales to improve understanding and predictability of process-level lifecycles in the data-sparse tropical East Atlantic region. CPEX-CV will work towards its goal by addressing four main science objectives. The first goal is to improve understanding of the interaction between large-scale environmental forcings such as the Intertropical Convergence Zone (ITCZ), Saharan Air Layer, African easterly waves, and mid-level African easterly jet, and the lifecycle and properties of convective cloud systems, including tropical cyclone precursors, in the tropical East Atlantic region. Next, observations will be made about how local kinematic and thermodynamic conditions, including the vertical structure and variability of the marine boundary layer, relate to the initiation and lifecycle of convective cloud systems and their processes. Third, CPEX-CV will investigate how dynamical and convective processes affect size dependent Saharan dust vertical structure, long-range Saharan dust transport, and boundary layer exchange pathways. The last objective will be to assess the impact of CPEX-CV observations of atmospheric winds, thermodynamics, clouds, and aerosols on the prediction of tropical Atlantic weather systems and validate and interpret spaceborne remote sensors that provide similar measurements. To achieve these objectives, the NASA DC-8 aircraft will be deployed with remote sensing instruments and dropsondes that will allow for the measurement of tropospheric aerosols, winds, temperature, water vapor, and precipitation. Instruments onboard the aircraft include the Airborne Third Generation Precipitation Radar (APR-3), lidars such as the Doppler Aerosol WiNd Lidar (DAWN), High Altitude Lidar Observatory (HALO), High Altitude Monolithic Microwave Integrated Circuit (MMIC) Sounding Radiometer (HAMSR), Advanced Vertical Atmospheric Profiling System (AVAPS) dropsonde system, Cloud Aerosol and Precipitation Spectrometer (CAPS), and the Airborne In-situ and Radio Occultation (AIRO) instrument. Measurements taken by CPEX-CV will assist in moving science forward from previous CPEX and CPEX-AW missions, the calibration and validation of satellite measurements, and the development of airborne sensors, especially those with potential for satellite deployment.

CPEXAW-HALO_DC8_1 is the High Altitude Lidar Observatory (HALO) image and h5 data files collected during the Convective Processes Experiment - Aerosols & Winds (CPEX-AW) onboard the DC-8 aircraft. Data collection for this product is complete. The Convective Processes Experiment – Aerosols & Winds (CPEX-AW) campaign was a joint effort between the US National Aeronautics and Space Administration (NASA) and the European Space Agency (ESA) with the primary goal of conducting a post-launch calibration and validation activities of the Atmospheric Dynamics Mission-Aeolus (ADM-AEOLUS) Earth observation wind Lidar satellite in St. Croix. CPEX-AW is a follow-on to the Convective Processes Experiment (CPEX) field campaign which took place in the summer of 2017. In addition to joint calibration/validation of ADM-AEOLUS, CPEX-AW studied the dynamics related to the Saharan Air Layer, African Easterly Waves and Jets, Tropical Easterly Jet, and deep convection in the InterTropical Convergence Zone (ITCZ). CPEX-AW science goals include: • Better understanding interactions of convective cloud systems and tropospheric winds as part of the joint NASA-ESA Aeolus Cal/Val effort over the tropical Atlantic; • Observing the vertical structure and variability of the marine boundary layer in relation to initiation and lifecycle of the convective cloud systems, convective processes (e.g., cold pools), and environmental conditions within and across the ITCZ; • Investigating how the African easterly waves and dry air and dust associated with Sahara Air Layer control the convectively suppressed and active periods of the ITCZ; • Investigating interactions of wind, aerosol, clouds, and precipitation and effects on long range dust transport and air quality over the western Atlantic. In order to successfully achieve the objectives of the campaign, NASA deployed its DC-8 aircraft equipped with an Airborne Third Generation Precipitation Radar (APR-3), Doppler Aerosol WiNd Lidar (DAWN), High Altitude Lidar Observatory (HALO), High Altitude Monolithic Microwave Integrated Circuit (MMIC) Sounding Radiometer (HAMSR), and dropsondes. This campaign aims to provide useful material to atmospheric scientists, meteorologists, lidar experts, air quality experts, professors, and students. The Atmospheric Science Data Center (ASDC) archives the dropsonde, HALO, and DAWN data products for CPEX-AW. For additional datasets please visit the Global Hydrometeorology Resource Center (GHRC).

During 25 May – 24 June 2017, NASA funded and conducted the Convective Processes Experiment (CPEX) which was based out of Ft. Lauderdale, FL and used a suite of instruments aboard a NASA DC-8 aircraft to investigate convective process and circulations over tropical waters. A main objective of CPEX was to obtain a comprehensive set of temperature, humidity and, particularly, wind observations in the vicinity of scattered and organized deep convection in all phases of the convective life cycle. The featured instrument of the airborne campaign was NASA’s Doppler Aerosol WiNd (DAWN) lidar but also included dropsondes, the Airborne Second Generation Precipitation Radar (APR-2), the High Altitude MMIC Sounding Radiometer (HAMSR), the Microwave Temperature and Humidity Profiler (MTHP), and the Microwave Atmospheric Sounder for Cubesat (MASC). In total, the CPEX campaign flew 16 missions over the Atlantic Ocean, Caribbean Sea and the Gulf of Mexico and included missions investigating undisturbed conditions, scattered convection, organized convection and the environment of a tropical storm. The DAWN (and Dropsonde) wind measurement collected during CPEX have provided a unique set of wind profiles to be used in analysis and model assimilation and prediction studies. CPEX also utilized the High Definition Sounding System (HDSS) dropsonde delivery system developed by Yankee Environmental Services to drop almost 300 dropsondes to obtain additional high-resolution vertical wind profiles during most missions. These dropsondes also provided needed calibration/validation for the much newer DAWN measurements.

CPEXAW-ADM-Aeolus_1 is the ESA ADM-Aeolus Datasets for the Convective Processes Experiment - Aerosols & Winds (CPEX-AW) sub-orbital campaign. Data collection for this product is complete. The Convective Processes Experiment – Aerosols & Winds (CPEX-AW) campaign was a joint effort between the US National Aeronautics and Space Administration (NASA) and the European Space Agency (ESA) with the primary goal of conducting a post-launch calibration and validation activities of the Atmospheric Dynamics Mission-Aeolus (ADM-AEOLUS) Earth observation wind Lidar satellite in St. Croix. CPEX-AW is a follow-on to the Convective Processes Experiment (CPEX) field campaign which took place in the summer of 2017. In addition to joint calibration/validation of ADM-AEOLUS, CPEX-AW studied the dynamics related to the Saharan Air Layer, African Easterly Waves and Jets, Tropical Easterly Jet, and deep convection in the InterTropical Convergence Zone (ITCZ). CPEX-AW science goals include: • Better understanding interactions of convective cloud systems and tropospheric winds as part of the joint NASA-ESA Aeolus Cal/Val effort over the tropical Atlantic; • Observing the vertical structure and variability of the marine boundary layer in relation to initiation and lifecycle of the convective cloud systems, convective processes (e.g., cold pools), and environmental conditions within and across the ITCZ; • Investigating how the African easterly waves and dry air and dust associated with Sahara Air Layer control the convectively suppressed and active periods of the ITCZ; • Investigating interactions of wind, aerosol, clouds, and precipitation and effects on long range dust transport and air quality over the western Atlantic. In order to successfully achieve the objectives of the campaign, NASA deployed its DC-8 aircraft equipped with an Airborne Third Generation Precipitation Radar (APR-3), Doppler Aerosol WiNd Lidar (DAWN), High Altitude Lidar Observatory (HALO), High Altitude Monolithic Microwave Integrated Circuit (MMIC) Sounding Radiometer (HAMSR), and dropsondes. This campaign aims to provide useful material to atmospheric scientists, meteorologists, lidar experts, air quality experts, professors, and students. The Atmospheric Science Data Center (ASDC) archives the dropsonde, HALO, and DAWN data products for CPEX-AW. For additional datasets please visit the Global Hydrometeorology Resource Center (GHRC).

CPEXAW-Dropsondes_1 is the dropsonde data files collected during the Convective Processes Experiment - Aerosols & Winds (CPEX-AW). Data collection for this product is complete. The Convective Processes Experiment – Aerosols & Winds (CPEX-AW) campaign was a joint effort between the US National Aeronautics and Space Administration (NASA) and the European Space Agency (ESA) with the primary goal of conducting a post-launch calibration and validation activities of the Atmospheric Dynamics Mission-Aeolus (ADM-AEOLUS) Earth observation wind Lidar satellite in St. Croix. CPEX-AW is a follow-on to the Convective Processes Experiment (CPEX) field campaign which took place in the summer of 2017. In addition to joint calibration/validation of ADM-AEOLUS, CPEX-AW studied the dynamics related to the Saharan Air Layer, African Easterly Waves and Jets, Tropical Easterly Jet, and deep convection in the InterTropical Convergence Zone (ITCZ). CPEX-AW science goals include: • Better understanding interactions of convective cloud systems and tropospheric winds as part of the joint NASA-ESA Aeolus Cal/Val effort over the tropical Atlantic; • Observing the vertical structure and variability of the marine boundary layer in relation to initiation and lifecycle of the convective cloud systems, convective processes (e.g., cold pools), and environmental conditions within and across the ITCZ; • Investigating how the African easterly waves and dry air and dust associated with Sahara Air Layer control the convectively suppressed and active periods of the ITCZ; • Investigating interactions of wind, aerosol, clouds, and precipitation and effects on long range dust transport and air quality over the western Atlantic. In order to successfully achieve the objectives of the campaign, NASA deployed its DC-8 aircraft equipped with an Airborne Third Generation Precipitation Radar (APR-3), Doppler Aerosol WiNd Lidar (DAWN), High Altitude Lidar Observatory (HALO), High Altitude Monolithic Microwave Integrated Circuit (MMIC) Sounding Radiometer (HAMSR), and dropsondes. This campaign aims to provide useful material to atmospheric scientists, meteorologists, lidar experts, air quality experts, professors, and students. The Atmospheric Science Data Center (ASDC) archives the dropsonde, HALO, and DAWN data products for CPEX-AW. For additional datasets please visit the Global Hydrometeorology Resource Center (GHRC).

AEOLUS-CALVAL-DAWN_DC8_1 is the Aeolus CalVal DAWN (Doppler Aerosol WiNd) Lidar Wind Profiles data product. Data was collected using the DAWN instrument on the Douglas (DC-8) Aircraft. Data collection for this product is complete. NASA conducted an airborne campaign from 17 April to 30 April 2019 to: 1) demonstrate the performance of the Doppler Aerosol WiNd Lidar (DAWN) and High Altitude Lidar Observatory (HALO) instruments across a range of aerosol, cloud, and weather conditions; 2) compare these measurements with the European Space Agency Aeolus mission to gain an initial perspective of Aeolus performance in preparation for a future international Aeolus Cal/Val airborne campaign; and 3) demonstrate how weather processes can be resolved and better understood through simultaneous airborne wind, water vapor (WV), and aerosol profile observations, coupled with numerical model and other remote sensing observations. Five NASA DC-8 aircraft flights, comprising 46 flight hours, were conducted over the Eastern Pacific and Southwest U.S., based out of NASA Armstrong Flight Research Center in Palmdale, CA and Kona, HI. Yankee Environmental Systems, Inc High Definition Sounding System (HDSS) eXpendable Digitial Dropsondes (XDD) were used to validate the DAWN and Aeolus wind observations. The LaRC Diode Laser Hygrometer instrument, which was integrated on the DC-8 in preparation for another NASA airborne campaign, provided in-situ WV measurements used during one flight to validate HALO and dropsonde WV profile products.

CPEXCV_Cloud_AircraftInSitu_DC8_Data is the in-situ cloud data collected during the Convective Processes Experiment - Cabo Verde (CPEX-CV) onboard the DC-8 aircraft. Data from the Cloud and Aerosol Spectrometer (CAS) instrument is featured in this collection. Data collection for this product is complete. Seeking to better understand atmospheric processes in regions with little data, the Convective Processes Experiment – Cabo Verde (CPEX-CV) campaign conducted by NASA is a continuation of the CPEX – Aerosols & Winds (CPEX-AW) campaign that took place between August to September 2021. The campaign will take place between 1-30 September 2022 and will operate out of Sal Island, Cabo Verde with the primary goal of investigating atmospheric dynamics, marine boundary layer properties, convection, the dust-laden Saharan Air Layer, and their interactions across various spatial scales to improve understanding and predictability of process-level lifecycles in the data-sparse tropical East Atlantic region. CPEX-CV will work towards its goal by addressing four main science objectives. The first goal is to improve understanding of the interaction between large-scale environmental forcings such as the Intertropical Convergence Zone (ITCZ), Saharan Air Layer, African easterly waves, and mid-level African easterly jet, and the lifecycle and properties of convective cloud systems, including tropical cyclone precursors, in the tropical East Atlantic region. Next, observations will be made about how local kinematic and thermodynamic conditions, including the vertical structure and variability of the marine boundary layer, relate to the initiation and lifecycle of convective cloud systems and their processes. Third, CPEX-CV will investigate how dynamical and convective processes affect size dependent Saharan dust vertical structure, long-range Saharan dust transport, and boundary layer exchange pathways. The last objective will be to assess the impact of CPEX-CV observations of atmospheric winds, thermodynamics, clouds, and aerosols on the prediction of tropical Atlantic weather systems and validate and interpret spaceborne remote sensors that provide similar measurements. To achieve these objectives, the NASA DC-8 aircraft will be deployed with remote sensing instruments and dropsondes that will allow for the measurement of tropospheric aerosols, winds, temperature, water vapor, and precipitation. Instruments onboard the aircraft include the Airborne Third Generation Precipitation Radar (APR-3), lidars such as the Doppler Aerosol WiNd Lidar (DAWN), High Altitude Lidar Observatory (HALO), High Altitude Monolithic Microwave Integrated Circuit (MMIC) Sounding Radiometer (HAMSR), Advanced Vertical Atmospheric Profiling System (AVAPS) dropsonde system, Cloud Aerosol and Precipitation Spectrometer (CAPS), and the Airborne In-situ and Radio Occultation (AIRO) instrument. Measurements taken by CPEX-CV will assist in moving science forward from previous CPEX and CPEX-AW missions, the calibration and validation of satellite measurements, and the development of airborne sensors, especially those with potential for satellite deployment.

CPEXCV-HALO_DC8_1 is the High Altitude Lidar Observatory (HALO) image and h5 data files collected during the Convective Processes Experiment - Cabo Verde (CPEX-CV) onboard the DC-8 aircraft. Data collection for this product is complete. Seeking to better understand atmospheric processes in regions with little data, the Convective Processes Experiment – Cabo Verde (CPEX-CV) campaign conducted by NASA is a continuation of the CPEX – Aerosols & Winds (CPEX-AW) campaign that took place between August to September 2021. The campaign will take place between 1-30 September 2022 and will operate out of Sal Island, Cabo Verde with the primary goal of investigating atmospheric dynamics, marine boundary layer properties, convection, the dust-laden Saharan Air Layer, and their interactions across various spatial scales to improve understanding and predictability of process-level lifecycles in the data-sparse tropical East Atlantic region. CPEX-CV will work towards its goal by addressing four main science objectives. The first goal is to improve understanding of the interaction between large-scale environmental forcings such as the Intertropical Convergence Zone (ITCZ), Saharan Air Layer, African easterly waves, and mid-level African easterly jet, and the lifecycle and properties of convective cloud systems, including tropical cyclone precursors, in the tropical East Atlantic region. Next, observations will be made about how local kinematic and thermodynamic conditions, including the vertical structure and variability of the marine boundary layer, relate to the initiation and lifecycle of convective cloud systems and their processes. Third, CPEX-CV will investigate how dynamical and convective processes affect size dependent Saharan dust vertical structure, long-range Saharan dust transport, and boundary layer exchange pathways. The last objective will be to assess the impact of CPEX-CV observations of atmospheric winds, thermodynamics, clouds, and aerosols on the prediction of tropical Atlantic weather systems and validate and interpret spaceborne remote sensors that provide similar measurements. To achieve these objectives, the NASA DC-8 aircraft will be deployed with remote sensing instruments and dropsondes that will allow for the measurement of tropospheric aerosols, winds, temperature, water vapor, and precipitation. Instruments onboard the aircraft include the Airborne Third Generation Precipitation Radar (APR-3), lidars such as the Doppler Aerosol WiNd Lidar (DAWN), High Altitude Lidar Observatory (HALO), High Altitude Monolithic Microwave Integrated Circuit (MMIC) Sounding Radiometer (HAMSR), Advanced Vertical Atmospheric Profiling System (AVAPS) dropsonde system, Cloud Aerosol and Precipitation Spectrometer (CAPS), and the Airborne In-situ and Radio Occultation (AIRO) instrument. Measurements taken by CPEX-CV will assist in moving science forward from previous CPEX and CPEX-AW missions, the calibration and validation of satellite measurements, and the development of airborne sensors, especially those with potential for satellite deployment.

The GRIP Doppler Aerosol WiNd Lidar (DAWN) Dataset was collected by the Doppler Aerosol WiNd (DAWN), a pulsed lidar, which operated aboard a NASA DC-8 aircraft during the Genesis and Rapid Intensification Processes (GRIP) field campaign. he major goal was to better understand how tropical storms form and develop into major hurricanes. NASA used the DC-8 aircraft, the WB-57 aircraft and the Global Hawk Unmanned Airborne System (UAS), configured with a suite of in situ and remote sensing instruments that were used to observe and characterize the lifecycle of hurricanes. This campaign also capitalized on a number of ground networks and space-based assets, in addition to the instruments deployed on aircraft from Ft. Lauderdale, Florida ( DC-8), Houston, Texas (WB-57), and NASA Dryden Flight Research Center, California (Global Hawk). Data values include Line-of-Sight (LOS) Winds, calculated vertical profiles of horizontal wind velocity, frequency-domain signal energy and time versus latitude and longitude. Instrument details can be found in the dataset documentation. Data was gathered during August 24, 2010 thru September 22, 2010 over the Atlantic Ocean.

CPEXCV_Cloud_AircraftInSitu_DC8_Data is the in-situ cloud data collected during the Convective Processes Experiment - Cabo Verde (CPEX-CV) onboard the DC-8 aircraft. Data from the Cloud and Aerosol Spectrometer (CAS) instrument is featured in this collection. Data collection for this product is complete.Seeking to better understand atmospheric processes in regions with little data, the Convective Processes Experiment – Cabo Verde (CPEX-CV) campaign conducted by NASA is a continuation of the CPEX – Aerosols & Winds (CPEX-AW) campaign that took place between August to September 2021. The campaign will take place between 1-30 September 2022 and will operate out of Sal Island, Cabo Verde with the primary goal of investigating atmospheric dynamics, marine boundary layer properties, convection, the dust-laden Saharan Air Layer, and their interactions across various spatial scales to improve understanding and predictability of process-level lifecycles in the data-sparse tropical East Atlantic region. CPEX-CV will work towards its goal by addressing four main science objectives. The first goal is to improve understanding of the interaction between large-scale environmental forcings such as the Intertropical Convergence Zone (ITCZ), Saharan Air Layer, African easterly waves, and mid-level African easterly jet, and the lifecycle and properties of convective cloud systems, including tropical cyclone precursors, in the tropical East Atlantic region. Next, observations will be made about how local kinematic and thermodynamic conditions, including the vertical structure and variability of the marine boundary layer, relate to the initiation and lifecycle of convective cloud systems and their processes. Third, CPEX-CV will investigate how dynamical and convective processes affect size dependent Saharan dust vertical structure, long-range Saharan dust transport, and boundary layer exchange pathways. The last objective will be to assess the impact of CPEX-CV observations of atmospheric winds, thermodynamics, clouds, and aerosols on the prediction of tropical Atlantic weather systems and validate and interpret spaceborne remote sensors that provide similar measurements. To achieve these objectives, the NASA DC-8 aircraft will be deployed with remote sensing instruments and dropsondes that will allow for the measurement of tropospheric aerosols, winds, temperature, water vapor, and precipitation. Instruments onboard the aircraft include the Airborne Third Generation Precipitation Radar (APR-3), lidars such as the Doppler Aerosol WiNd Lidar (DAWN), High Altitude Lidar Observatory (HALO), High Altitude Monolithic Microwave Integrated Circuit (MMIC) Sounding Radiometer (HAMSR), Advanced Vertical Atmospheric Profiling System (AVAPS) dropsonde system, Cloud Aerosol and Precipitation Spectrometer (CAPS), and the Airborne In-situ and Radio Occultation (AIRO) instrument. Measurements taken by CPEX-CV will assist in moving science forward from previous CPEX and CPEX-AW missions, the calibration and validation of satellite measurements, and the development of airborne sensors, especially those with potential for satellite deployment.