DSCOVR_EPIC_L2_TO3_v03 is Level2 Total Ozone derived from the Deep Space Climate Observatory (DSCOVR) Earth Polychromatic Imaging Camera (EPIC) using Level 1b version 3 inputs and version 3 ozone retrieval algorithm. The measurements from four EPIC UV (ultraviolet) channels derive the global distributions of total ozone over the entire sunlit portion of the Earth. A new soft calibration technique developed based on scene matching with OMPS gives calibrated EPIC radiances. The calibrated EPIC radiances derive science-quality total ozone products from EPIC consistent with those from other UV instruments. The retrieval algorithm uses wavelength triplets and assumes that the scene reflectivity changes linearly with wavelength. Version 3 algorithm includes several key modifications aimed to improve total ozone retrievals: a) switch to Version 3 Level 1b product with improved geolocation registration, flat field, and dark counts corrections; b) replace OMI-based (Ozone Monitoring Instrument) cloud height climatology with the simultaneous EPIC A-Band cloud height; c) update absolute calibrations using polar orbiting the NASA OMPS SNPP ( Ozone Mapping and Profiler Suite / Suomi National Polar-orbiting Partnership Ozone); d) add corrections for ozone profile shape and temperature; e) update algorithm and error flags to filter data; f) add column weighting functions for each observation to facilitate error analysis. EPIC ozone retrievals accurately capture short-term synoptic changes in total column ozone. With EPIC measurements from DSCOVR's vantage point, synoptic ozone maps can be derived every 1-2 hours. Scene Reflectivity (clouds, aerosols, and surface) is derived from ozone retrieval. In conjunction with ozone, the scene reflectivity has been used to derive the amount of UV solar radiation reaching the ground, and surface UV Erythemal is also reported in these files.

Robust cloud products are critical for Deep Space Climate Observatory (DSCOVR) to contribute to climate studies significantly. Building on our team’s track record in cloud detection, cloud property retrieval, oxygen band exploitation, and DSCOVR-related studies, we propose to develop a suite of algorithms for generating the operational Earth Polychromatic Imaging Camera (EPIC) cloud mask, cloud height, and cloud optical thickness products. Multichannel observations will be used for cloud masking; the cloud height will be developed with information from the oxygen A- and B- band pairs (780 nm vs. 779.5 nm and 680 nm vs. 687.75 nm); for the cloud optical thickness retrieval, we propose an approach that combines the EPIC 680 nm observations and numerical weather model outputs. Preliminary results from radiative transfer modeling and proxy data applications show that the proposed algorithms are viable.Product validation will be conducted by comparing EPIC observations/retrievals with counterparts from coexisting Low Earth Orbit (LEO) and Geosynchronous Earth Orbit (GEO) satellites. The proposed work will include a rigorous uncertainty analysis based on theoretical and computational radiative transfer modeling that complements standard validation activities with physics-based diagnostics. We also plan to evaluate and improve the calibration of the EPIC O2 A- and B-band absorption channels by tracking the instrument performance over known targets, such as cloud-free ocean and ice sheet surfaces.The deliverables for the proposed work include an Algorithm Theoretical Basis Document (ATBD) for peer review, products generated with the proposed algorithms, and supporting research articles. The data products, which will be archived at the Atmospheric Science Data Center (ASDC) at the NASA Langley Research Center, will provide essential inputs needed for the community to apply EPIC observations to climate research and to interpret better The National Institute of Standards and Technology Advanced Radiometer (NISTAR) observations.The proposed work directly responds to the solicitation to “develop and implement the necessary algorithms and processes to enable various data products from EPIC sunrise to sunset observations once on orbit” and improve “the calibration of EPIC based on in-flight data.”

DSCOVR_EPIC_L2_AER_03 is the Deep Space Climate Observatory (DSCOVR) Enhanced Polychromatic Imaging Camera (EPIC) Level 2 UV Aerosol Version 3 data product. Observations for this data product are at 340 and 388 nm and are used to derive near UV (ultraviolet) aerosol properties. The EPIC aerosol retrieval algorithm (EPICAERUV) uses a set of aerosol models to account for the presence of carbonaceous aerosols from biomass burning and wildfires (BIO), desert dust (DST), and sulfate-based (SLF) aerosols. These aerosol models are identical to those assumed in the OMI (Ozone Monitoring Instrument) algorithm (Torres et al., 2007; Jethva and Torres, 2011). Aerosol data products generated by the EPICAERUV algorithm are aerosol extinction optical depth (AOD) and single scattering albedo (SSA) at 340, 388, and 500 nm for clear sky conditions. AOD of absorbing aerosols above clouds is also reported (Jethva et al., 2018). In addition, the UV Aerosol Index (UVAI) is calculated from 340 and 388 nm radiances for all sky conditions. AOD is a dimensionless measure of the extinction of light y aerosols due to the combined effect of scattering and absorption. SSA represents the fraction of extinction solely due to aerosol scattering effects. The AI is simply a residual parameter that quantifies the difference in spectral dependence between measured and calculated near UV radiances, assuming a purely molecular atmosphere. Because most of the observed positive residuals are associated with the presence of absorbing aerosols, this parameter is commonly known as the UV Absorbing Aerosol Index. EPIC-derived aerosol parameters are reported at a 10 km (nadir) resolution.

Robust cloud products are critical for the Deep Space Climate Observatory (DSCOVR) to contribute significantly to climate studies. Building on our team’s track record in cloud detection, cloud property retrieval, oxygen band exploitation, and DSCOVR-related studies, we propose to develop a suite of algorithms for generating the operational Earth Polychromatic Imaging Camera (EPIC) cloud mask, cloud height, and cloud optical thickness products. Multichannel observations will be used for cloud masking; the cloud height will be developed with information from the oxygen A- and B- band pairs (780 nm vs. 779.5 nm and 680 nm vs. 687.75 nm); for the cloud optical thickness retrieval, we propose an approach that combines the EPIC 680 nm observations and numerical weather model outputs. Preliminary results from radiative transfer modeling and proxy data applications show that the proposed algorithms are viable.Product validation will be conducted by comparing EPIC observations/retrievals with counterparts from coexisting Low Earth Orbit (LEO) and Geosynchronous Earth Orbit (GEO) satellites. The proposed work will include a rigorous uncertainty analysis based on theoretical and computational radiative transfer modeling that complements standard validation activities with physics-based diagnostics. We also plan to evaluate and improve the calibration of the EPIC O2 A- and B-band absorption channels by tracking the instrument performance over known targets, such as cloud-free ocean and ice sheet surfaces.The deliverables for the proposed work include an Algorithm Theoretical Basis Document (ATBD) for peer review, products generated with the proposed algorithms, and supporting research articles. The data products, archived at the Atmospheric Science Data Center (ASDC) at the NASA Langley Research Center, will provide essential inputs needed for the community to apply EPIC observations to climate research and better interpret The National Institute of Standards and Technology Advanced Radiometer (NISTAR) observations.The proposed work directly responds to the solicitation to “develop and implement the necessary algorithms and processes to enable various data products from EPIC sunrise to sunset observations once on orbit” and improve “the calibration of EPIC based on in-flight data.”

TL2O3LN_7 is the Tropospheric Emission Spectrometer (TES)/Aura Level 2 Ozone Lite Nadir Version 7 data product. TES Level 2 data contain retrieved species (or temperature) profiles at the observation targets and the estimated errors. The geolocation, quality, and other data (e.g., surface characteristics for nadir observations) are also provided. L2 modeled spectra are evaluated using radiative transfer modeling algorithms. The process, referred to as retrieval, compares observed spectra to the modeled spectra and iteratively updates the atmospheric parameters. L2 standard product files include information for one molecular species (or temperature) for an entire global survey or special observation run. A global survey consists of a maximum of 16 consecutive orbits.A nadir sequence within the TES Global Survey is a fixed number of observations within an orbit for a Global Survey. Prior to April 24, 2005, it consisted of two low resolution scans over the same ground locations. After April 24, 2005, Global Survey data consisted of three low resolution scans. The Nadir standard product consists of four files, where each file is composed of the Global Survey Nadir observations from one of four focal planes for a single orbit, i.e. 72 orbit sequences. The Global Survey Nadir observations currently only use a single set of filter mix. A Global Survey consists of observations along 16 consecutive orbits at the start of a two day cycle, over which 3,200 retrievals are performed. Each observation is the input for retrievals of species Volume Mixing Ratios (VMR), temperature profiles, surface temperature and other data parameters with associated pressure levels, precision, total error, vertical resolution, total column density and other diagnostic quantities. Each TES Level 2 standard product reports information in a swath format conforming to the HDF-EOS Aura File Format Guidelines. Each Swath object is bounded by the number of observations in a global survey and a predefined set of pressure levels representing slices through the atmosphere. Each standard product can have a variable number of observations depending upon the Global Survey configuration and whether averaging is employed. Also, missing or bad retrievals are not reported. The organization of data within the Swath object is based on a superset of the UARS pressure levels used to report concentrations of trace atmospheric gases. The reporting grid is the same pressure grid used for modeling. There are 67 reporting levels from 1211.53 hPa, which allows for very high surface pressure conditions, to 0.1 hPa, about 65 km. In addition, the products will report values directly at the surface when possible or at the observed cloud top level. Thus, in the Standard Product files each observation can potentially contain estimates for the concentration of a particular molecule at 67 different pressure levels within the atmosphere. However, for most retrieved profiles, the highest pressure levels are not observed due to a surface at lower pressure or cloud obscuration. For pressure levels corresponding to altitudes below the cloud top or surface, where measurements were not possible, a fill value will be applied.To minimize the duplication of information between the individual species standard products, data fields common to each species (such as spacecraft coordinates, emissivity, and other data fields) have been collected into a separate standard product, termed the TES L2 Ancillary Data product (ESDT short name: TL2ANC). Users of this product should also obtain the Ancillary Data product.

TL2O3N_8 is the Tropospheric Emission Spectrometer (TES)/Aura Level 2 Ozone Nadir Version 8 data product. It consists of information for one molecular species for an entire Global Survey or Special Observation. TES was an instrument aboard NASA's Aura satellite and was launched from California on July 15, 2004. Data collection for TES is complete. TES Level 2 data contain retrieved species (or temperature) profiles at the TES was an instrument aboard NASA's Aura satellite and was launched from California on July 15, 2004. Data collection for TES is complete. TES Level 2 data contain retrieved species (or temperature) profiles at the observation targets and the estimated errors. The geolocation, quality, and other data (e.g., surface characteristics for nadir observations) were also provided. L2 modeled spectra were evaluated using radiative transfer modeling algorithms. The process, referred to as retrieval, compared observed spectra to the modeled spectra and iteratively updated the atmospheric parameters. L2 standard product files included information for one molecular species (or temperature) for an entire global survey or special observation run. A global survey consisted of a maximum of 16 consecutive orbits.Nadir observations, which point directly to the surface of the Earth, are different from limb observations, which are pointed at various off-nadir angles into the atmosphere. Nadir and limb observations were added to separate L2 files, and a single ancillary file was composed of data that are common to both nadir and limb files. A Nadir sequence within the TES Global Survey was a fixed number of observations within an orbit for a Global Survey. Prior to April 24, 2005, it consisted of two low resolution scans over the same ground locations. After April 24, 2005, Global Survey data consisted of three low resolution scans. The Nadir standard product consists of four files, where each file is composed of the Global Survey Nadir observations from one of four focal planes for a single orbit, i.e. 72 orbit sequences. The Global Survey Nadir observations only used a single set of filter mix. A Global Survey consisted of observations along 16 consecutive orbits at the start of a two day cycle, over which 3,200 retrievals were performed. Each observation was the input for retrievals of species Volume Mixing Ratios (VMRs), temperature profiles, surface temperature, and other data parameters with associated pressure levels, precision, total error, vertical resolution, total column density, and other diagnostic quantities. Each TES Level 2 standard product reported information in a swath format conforming to the HDF-EOS Aura File Format Guidelines. Each Swath object was bounded by the number of observations in a global survey and a predefined set of pressure levels, representing slices through the atmosphere. Each standard product could have had a variable number of observations depending upon the Global Survey configuration and whether averaging was employed. Also, missing or bad retrievals were not reported. Further, observations were occasionally scheduled on non-global survey days. In general they were measurements made for validation purposes or with highly focused science objectives. Those non-global survey measurements were referred to as “special observations.”A Limb sequence within the TES Global Survey was three high-resolution scans over the same limb locations. The Limb standard product consists of four files, where each file is composed of the Global Survey Limb observations from one of four focal planes for a single orbit, i.e. 72 orbit sequences. The Global Survey Limb observations used a repeating sequence of filter wheel positions. Special Observations could only be scheduled during the 9 or 10 orbit gaps in the Global Surveys, and were conducted in any of three basic modes: stare, transect, step-and-stare. The mode used depended on the science requirement. Each limb observation Limb 1, Limb 2 and Limb 3, were

DSCOVR_EPIC_L2_AER_03 is the Deep Space Climate Observatory (DSCOVR) Enhanced Polychromatic Imaging Camera (EPIC) Level 2 UV Aerosol Version 3 data product. Observations for this data product are at 340 and 388 nm and are used to derive near UV (ultraviolet) aerosol properties. The EPIC aerosol retrieval algorithm (EPICAERUV) uses a set of aerosol models to account for the presence of carbonaceous aerosols from biomass burning and wildfires (BIO), desert dust (DST), and sulfate-based (SLF) aerosols. These aerosol models are identical to those assumed in the OMI (Ozone Monitoring Instrument) algorithm (Torres et al., 2007; Jethva and Torres, 2011). Aerosol data products generated by the EPICAERUV algorithm are aerosol extinction optical depth (AOD) and single scattering albedo (SSA) at 340, 388, and 500 nm for clear sky conditions. AOD of absorbing aerosols above clouds is also reported (Jethva et al., 2018). In addition, the UV Aerosol Index (UVAI) is calculated from 340 and 388 nm radiances for all sky conditions. AOD is a dimensionless measure of the extinction of light y aerosols due to the combined effect of scattering and absorption. SSA represents the fraction of extinction solely due to aerosol scattering effects. The AI is a residual parameter that quantifies the difference in spectral dependence between measured and calculated near UV radiances, assuming a purely molecular atmosphere. Because most of the observed positive residuals are associated with absorbing aerosols, this parameter is commonly known as the UV Absorbing Aerosol Index. EPIC-derived aerosol parameters are reported at a 10 km (nadir) resolution.

TL2O3NS_8 is the Tropospheric Emission Spectrometer (TES)/Aura Level 2 Ozone Nadir Special Observation Version 8 data product. TES was an instrument aboard NASA's Aura satellite and was launched from California on July 15, 2004. Data collection for TES is complete. It consisted of information for one molecular species for an entire Global Survey or Special Observation. TES Level 2 data contained retrieved species (or temperature) profiles at the observation targets and the estimated errors. The geolocation, quality and other data (e.g., surface characteristics for nadir observations) were also provided. L2 modeled spectra were evaluated using radiative transfer modeling algorithms. The process, referred to as retrieval, compared observed spectra to the modeled spectra and iteratively updated the atmospheric parameters. L2 standard product files included information for one molecular species (or temperature) for an entire global survey or special observation run. A global survey consisted of a maximum of 16 consecutive orbits. Nadir and limb observations were in separate L2 files, and a single ancillary file was composed of data that are common to both nadir and limb files. A nadir sequence within the TES Global Survey was a fixed number of observations within an orbit for a Global Survey. Prior to April 24, 2005, it consisted of two low resolution scans over the same ground locations. After April 24, 2005, Global Survey data consisted of three low resolution scans. The Nadir standard product consists of four files, where each file is composed of the Global Survey Nadir observations from one of four focal planes for a single orbit, i.e. 72 orbit sequences. The Global Survey Nadir observations only used a single set of filter mix. A Global Survey consists of observations along 16 consecutive orbits at the start of a two day cycle, over which 3,200 retrievals were performed. Each observation was the input for retrievals of species volume mixing ratios (VMRs), temperature profiles, surface temperature and other data parameters with associated pressure levels, precision, total error, vertical resolution, total column density and other diagnostic quantities. Each TES Level 2 standard product reported information in a swath format conforming to the HDF-EOS Aura File Format Guidelines. Each Swath object wa bounded by the number of observations in a global survey and a predefined set of pressure levels representing slices through the atmosphere. Each standard product could have had a variable number of observations depending upon the Global Survey configuration and whether averaging is employed. Also, missing or bad retrievals were not reported. The organization of data within the Swath object was based on a superset of the Upper Atmosphere Research Satellite (UARS) pressure levels that was used to report concentrations of trace atmospheric gases. The reporting grid was the same pressure grid used for modeling. There were 67 reporting levels from 1211.53 hPa, which allowed for very high surface pressure conditions, to 0.1 hPa, about 65 km. In addition, the products reported values directly at the surface when possible or at the observed cloud top level. Thus in the Standard Product files each observation could potentially contain estimates for the concentration of a particular molecule at 67 different pressure levels within the atmosphere. However, for most retrieved profiles, the highest pressure levels were not observed due to a surface at lower pressure or cloud obscuration. For pressure levels corresponding to altitudes below the cloud top or surface, where measurements were not possible, a fill value was applied.To minimize the duplication of information between the individual species standard products, data fields common to each species (such as spacecraft coordinates, emissivity, and other data fields) have been collected into a separate standard product, termed the TES L2 Ancillary Data product (ESDT short name: TL2ANC). Users

TL2HDON_8 is the Tropospheric Emission Spectrometer (TES)/Aura Level 2 Deuterium Oxide Nadir Version 8 data product. TES was an instrument aboard NASA's Aura satellite and was launched from California on July 15, 2004. Data collection for TES is complete. TES Level 2 data contains retrieved species (or temperature) profiles at the observation targets and the estimated errors. The geolocation, quality, and other data (e.g., surface characteristics for nadir observations) were also provided. L2 modeled spectra were evaluated using radiative transfer modeling algorithms. The process, referred to as retrieval, compared observed spectra to the modeled spectra and iteratively updated the atmospheric parameters. L2 standard product files included information for one molecular species (or temperature) for an entire global survey or special observation run. A global survey consisted of a maximum of 16 consecutive orbits. A nadir sequence within the TES Global Survey was a fixed number of observations within an orbit for a Global Survey. Prior to April 24, 2005, it consisted of two low resolution scans over the same ground locations. After April 24, 2005, Global Survey data consisted of three low resolution scans. The Nadir standard product consisted of four files, where each file was composed of the Global Survey Nadir observations from one of four focal planes for a single orbit, i.e. 72 orbit sequences. The Global Survey Nadir observations only used a single set of filter mix. A Global Survey consisted of observations along 16 consecutive orbits at the start of a two day cycle, over which 3,200 retrievals were performed. Each observation was the input for retrievals of species volume mixing ratios (VMRs), temperature profiles, surface temperature and other data parameters with associated pressure levels, precision, total error, vertical resolution, total column density, and other diagnostic quantities. Each TES Level 2 standard product reported information in a swath format conforming to the HDF-EOS Aura File Format Guidelines. Each Swath object was bounded by the number of observations in a global survey and a predefined set of pressure levels representing slices through the atmosphere. Each standard product could have had a variable number of observations depending upon the Global Survey configuration and whether averaging is employed. Also, missing or bad retrievals were not reported. The organization of data within the Swath object was based on a superset of the Upper Atmosphere Research Satellite (UARS) pressure levels that was used to report concentrations of trace atmospheric gases. The reporting grid was the same pressure grid used for modeling. There were 67 reporting levels from 1211.53 hPa, which allowed for very high surface pressure conditions, to 0.1 hPa, about 65 km. In addition, the products reported values directly at the surface when possible or at the observed cloud top level. Thus in the Standard Product files each observation could potentially contain estimates for the concentration of a particular molecule at 67 different pressure levels within the atmosphere. However, for most retrieved profiles, the highest pressure levels were not observed due to a surface at lower pressure or cloud obscuration. For pressure levels corresponding to altitudes below the cloud top or surface, where measurements were not possible, a fill value was applied.To minimize the duplication of information between the individual species standard products, data fields common to each species (such as spacecraft coordinates, emissivity, and other data fields) have been collected into a separate standard product, termed the TES L2 Ancillary Data product (ESDT short name: TL2ANC). Users of this product should also obtain the Ancillary Data product.

DSCOVR_EPIC_L2_SO2_v03 is the Deep Space Climate Observatory (DSCOVR) Enhanced Polychromatic Imaging Camera (EPIC) Level 2 Sulfur Dioxide (SO2) product with EPIC version 03 inputs. It has key ultraviolet (UV) channels suitable for retrieving volcanic sulfur dioxide (SO2) and ash, enabling timely tracking and forecasting of volcanic plumes and enhancing our ability to mitigate aviation hazards. EPIC measurements will also be co-located with all satellite UV and infrared sensors, offering ample opportunities for data inter-comparisons and demonstrating advanced retrievals of volcanic ash mass through a synergistic approach. We propose to implement our mature algorithms previously developed for Total Ozone Mapping Spectrometer (TOMS) and Ozone Monitoring Instrument (OMI) to enable SO2 and Ash Index (AI) products from EPIC UV observations to demonstrate improved estimates of volcanic SO2 and ash mass, height and sulfate aerosol loading.