DSCOVR_EPIC_L2_TO3_v03 is Level2 Total Ozone derived from the Deep Space Climate Observatory (DSCOVR) Earth Polychromatic Imaging Camera (EPIC) using Level 1b version 3 inputs and version 3 ozone retrieval algorithm. The measurements from four EPIC UV (ultraviolet) channels derive the global distributions of total ozone over the entire sunlit portion of the Earth. A new soft calibration technique developed based on scene matching with OMPS gives calibrated EPIC radiances. The calibrated EPIC radiances derive science-quality total ozone products from EPIC consistent with those from other UV instruments. The retrieval algorithm uses wavelength triplets and assumes that the scene reflectivity changes linearly with wavelength. Version 3 algorithm includes several key modifications aimed to improve total ozone retrievals: a) switch to Version 3 Level 1b product with improved geolocation registration, flat field, and dark counts corrections; b) replace OMI-based (Ozone Monitoring Instrument) cloud height climatology with the simultaneous EPIC A-Band cloud height; c) update absolute calibrations using polar orbiting the NASA OMPS SNPP ( Ozone Mapping and Profiler Suite / Suomi National Polar-orbiting Partnership Ozone); d) add corrections for ozone profile shape and temperature; e) update algorithm and error flags to filter data; f) add column weighting functions for each observation to facilitate error analysis. EPIC ozone retrievals accurately capture short-term synoptic changes in total column ozone. With EPIC measurements from DSCOVR's vantage point, synoptic ozone maps can be derived every 1-2 hours. Scene Reflectivity (clouds, aerosols, and surface) is derived from ozone retrieval. In conjunction with ozone, the scene reflectivity has been used to derive the amount of UV solar radiation reaching the ground, and surface UV Erythemal is also reported in these files.

Robust cloud products are critical for Deep Space Climate Observatory (DSCOVR) to contribute to climate studies significantly. Building on our team’s track record in cloud detection, cloud property retrieval, oxygen band exploitation, and DSCOVR-related studies, we propose to develop a suite of algorithms for generating the operational Earth Polychromatic Imaging Camera (EPIC) cloud mask, cloud height, and cloud optical thickness products. Multichannel observations will be used for cloud masking; the cloud height will be developed with information from the oxygen A- and B- band pairs (780 nm vs. 779.5 nm and 680 nm vs. 687.75 nm); for the cloud optical thickness retrieval, we propose an approach that combines the EPIC 680 nm observations and numerical weather model outputs. Preliminary results from radiative transfer modeling and proxy data applications show that the proposed algorithms are viable.Product validation will be conducted by comparing EPIC observations/retrievals with counterparts from coexisting Low Earth Orbit (LEO) and Geosynchronous Earth Orbit (GEO) satellites. The proposed work will include a rigorous uncertainty analysis based on theoretical and computational radiative transfer modeling that complements standard validation activities with physics-based diagnostics. We also plan to evaluate and improve the calibration of the EPIC O2 A- and B-band absorption channels by tracking the instrument performance over known targets, such as cloud-free ocean and ice sheet surfaces.The deliverables for the proposed work include an Algorithm Theoretical Basis Document (ATBD) for peer review, products generated with the proposed algorithms, and supporting research articles. The data products, which will be archived at the Atmospheric Science Data Center (ASDC) at the NASA Langley Research Center, will provide essential inputs needed for the community to apply EPIC observations to climate research and to interpret better The National Institute of Standards and Technology Advanced Radiometer (NISTAR) observations.The proposed work directly responds to the solicitation to “develop and implement the necessary algorithms and processes to enable various data products from EPIC sunrise to sunset observations once on orbit” and improve “the calibration of EPIC based on in-flight data.”

TL2O3NS_8 is the Tropospheric Emission Spectrometer (TES)/Aura Level 2 Ozone Nadir Special Observation Version 8 data product. TES was an instrument aboard NASA's Aura satellite and was launched from California on July 15, 2004. Data collection for TES is complete. It consisted of information for one molecular species for an entire Global Survey or Special Observation. TES Level 2 data contained retrieved species (or temperature) profiles at the observation targets and the estimated errors. The geolocation, quality and other data (e.g., surface characteristics for nadir observations) were also provided. L2 modeled spectra were evaluated using radiative transfer modeling algorithms. The process, referred to as retrieval, compared observed spectra to the modeled spectra and iteratively updated the atmospheric parameters. L2 standard product files included information for one molecular species (or temperature) for an entire global survey or special observation run. A global survey consisted of a maximum of 16 consecutive orbits. Nadir and limb observations were in separate L2 files, and a single ancillary file was composed of data that are common to both nadir and limb files. A nadir sequence within the TES Global Survey was a fixed number of observations within an orbit for a Global Survey. Prior to April 24, 2005, it consisted of two low resolution scans over the same ground locations. After April 24, 2005, Global Survey data consisted of three low resolution scans. The Nadir standard product consists of four files, where each file is composed of the Global Survey Nadir observations from one of four focal planes for a single orbit, i.e. 72 orbit sequences. The Global Survey Nadir observations only used a single set of filter mix. A Global Survey consists of observations along 16 consecutive orbits at the start of a two day cycle, over which 3,200 retrievals were performed. Each observation was the input for retrievals of species volume mixing ratios (VMRs), temperature profiles, surface temperature and other data parameters with associated pressure levels, precision, total error, vertical resolution, total column density and other diagnostic quantities. Each TES Level 2 standard product reported information in a swath format conforming to the HDF-EOS Aura File Format Guidelines. Each Swath object wa bounded by the number of observations in a global survey and a predefined set of pressure levels representing slices through the atmosphere. Each standard product could have had a variable number of observations depending upon the Global Survey configuration and whether averaging is employed. Also, missing or bad retrievals were not reported. The organization of data within the Swath object was based on a superset of the Upper Atmosphere Research Satellite (UARS) pressure levels that was used to report concentrations of trace atmospheric gases. The reporting grid was the same pressure grid used for modeling. There were 67 reporting levels from 1211.53 hPa, which allowed for very high surface pressure conditions, to 0.1 hPa, about 65 km. In addition, the products reported values directly at the surface when possible or at the observed cloud top level. Thus in the Standard Product files each observation could potentially contain estimates for the concentration of a particular molecule at 67 different pressure levels within the atmosphere. However, for most retrieved profiles, the highest pressure levels were not observed due to a surface at lower pressure or cloud obscuration. For pressure levels corresponding to altitudes below the cloud top or surface, where measurements were not possible, a fill value was applied.To minimize the duplication of information between the individual species standard products, data fields common to each species (such as spacecraft coordinates, emissivity, and other data fields) have been collected into a separate standard product, termed the TES L2 Ancillary Data product (ESDT short name: TL2ANC). Users

EPIC Tropospheric Ozone Data ProductThe Earth Polychromatic Imaging Camera (EPIC) on the Deep Space Climate Observatory (DSCOVR) spacecraft provides measurements of Earth-reflected radiances from the entire sunlit portion of the Earth. The measurements from four EPIC UV (Ultraviolet) channels reconstruct global distributions of total ozone. The tropospheric ozone columns (TCO) are then derived by subtracting independently measured stratospheric ozone columns from the EPIC total ozone. TCO data product files report gridded synoptic maps of TCO measured over the sunlit portion of the Earth disk on a 1-2 hour basis. Sampling times for these hourly TCO data files are the same as for the EPIC L2 total ozone product. Version 1.0 of the TCO product is based on Version 3 of the EPIC L1 product and the Version 3 Total Ozone Column Product. The stratospheric columns were derived from the Modern-Era Retrospective analysis for Research and Applications, Version 2 (MERRA-2) ozone fields (Gelaro et al., 2017).In contrast to the EPIC total ozone maps that are reported at a high spatial resolution of 18 × 18 km2 near the center of the image, the TCO maps are spatially averaged over several EPIC pixels and written on a regular spatial grid (1° latitude x 1° longitude). Kramarova et al. (2021) describe the EPIC TCO product and its evaluation against independent sonde and satellite measurements. Table 1 lists all of the variables included in the TCO product files. Ozone arrays in the product files are integrated vertical columns in Dobson Units (DU; 1 DU = 2.69×1020 molecules m-2).Filename ConventionThe TCO product files are formatted HDF5 and represent a Level-4 (L4) product. The filenames have the following naming convention:”DSCOVR_EPIC_L4_TrO3_01_YYYYMMDDHHMMSS_03.h5” Where “TrO3” means tropospheric column ozone, “01” means that this is version 01 for this product, “YYYYMMDDHHMMSS” is the UTC measurement time with “YYYY” for year (2015-present), “MM” for month (01-12), “DD” for day of the month (1-31), and “HHMMSS” denotes hours-minutes-seconds, and “03” signifies that v3 L1b measurements were used to derive the EPIC total ozone and consequently TCO.Column Weighting Function AdjustmentThere are two TCO gridded arrays in each hourly data file for the user to choose from; one is denoted TroposphericColumnOzone, and the other is TroposphericColumnOzoneAdjusted. The latter TCO array includes an adjustment to correct for reduced sensitivity of the EPIC UV measurements in detecting ozone in the low troposphere/boundary layer. The adjustment depended on latitude and season and was derived using simulated tropospheric ozone from the GEOS-Replay model (Strode et al. 2020) constrained by the MERRA-2 meteorology through the replay method. Our analysis (Kramarova et al., 2021) indicated that the adjusted TCO array is more accurate and precise. Flagging Bad DataKramarova et al. (2021) note that the preferred EPIC total ozone measurements used for scientific study are those where the L2 “AlgorithmFlag” parameter equals 1, 101, or 111. In this TCO product, we have included only L2 total ozone pixels with these algorithm flag values. The TCO product files provide a gridded version of the AlgorithmFlag parameter as a comparison reference. Still, it is not needed by the user for applying data quality filtering.Another parameter in the EPIC L2 total ozone files for filtering questionable data is the “ErrorFlag.” The TCO product files include a gridded version of this ErrorFlag parameter that the user should apply. Only TCO-gridded pixels with an ErrorFlag value of zero should be used.TCO measurements at high satellite-look angles and/or high solar zenith angles should also be filtered out for analysis. The TCO files include a gridded version of the satellite look angle and the solar zenith angle denoted as “SatelliteLookAngle” and “SolarZenithAngle,” respectively. For scientific applications, users should filter TCO array data and use only pixels with

TL2O3N_8 is the Tropospheric Emission Spectrometer (TES)/Aura Level 2 Ozone Nadir Version 8 data product. It consists of information for one molecular species for an entire Global Survey or Special Observation. TES was an instrument aboard NASA's Aura satellite and was launched from California on July 15, 2004. Data collection for TES is complete. TES Level 2 data contain retrieved species (or temperature) profiles at the TES was an instrument aboard NASA's Aura satellite and was launched from California on July 15, 2004. Data collection for TES is complete. TES Level 2 data contain retrieved species (or temperature) profiles at the observation targets and the estimated errors. The geolocation, quality, and other data (e.g., surface characteristics for nadir observations) were also provided. L2 modeled spectra were evaluated using radiative transfer modeling algorithms. The process, referred to as retrieval, compared observed spectra to the modeled spectra and iteratively updated the atmospheric parameters. L2 standard product files included information for one molecular species (or temperature) for an entire global survey or special observation run. A global survey consisted of a maximum of 16 consecutive orbits.Nadir observations, which point directly to the surface of the Earth, are different from limb observations, which are pointed at various off-nadir angles into the atmosphere. Nadir and limb observations were added to separate L2 files, and a single ancillary file was composed of data that are common to both nadir and limb files. A Nadir sequence within the TES Global Survey was a fixed number of observations within an orbit for a Global Survey. Prior to April 24, 2005, it consisted of two low resolution scans over the same ground locations. After April 24, 2005, Global Survey data consisted of three low resolution scans. The Nadir standard product consists of four files, where each file is composed of the Global Survey Nadir observations from one of four focal planes for a single orbit, i.e. 72 orbit sequences. The Global Survey Nadir observations only used a single set of filter mix. A Global Survey consisted of observations along 16 consecutive orbits at the start of a two day cycle, over which 3,200 retrievals were performed. Each observation was the input for retrievals of species Volume Mixing Ratios (VMRs), temperature profiles, surface temperature, and other data parameters with associated pressure levels, precision, total error, vertical resolution, total column density, and other diagnostic quantities. Each TES Level 2 standard product reported information in a swath format conforming to the HDF-EOS Aura File Format Guidelines. Each Swath object was bounded by the number of observations in a global survey and a predefined set of pressure levels, representing slices through the atmosphere. Each standard product could have had a variable number of observations depending upon the Global Survey configuration and whether averaging was employed. Also, missing or bad retrievals were not reported. Further, observations were occasionally scheduled on non-global survey days. In general they were measurements made for validation purposes or with highly focused science objectives. Those non-global survey measurements were referred to as “special observations.”A Limb sequence within the TES Global Survey was three high-resolution scans over the same limb locations. The Limb standard product consists of four files, where each file is composed of the Global Survey Limb observations from one of four focal planes for a single orbit, i.e. 72 orbit sequences. The Global Survey Limb observations used a repeating sequence of filter wheel positions. Special Observations could only be scheduled during the 9 or 10 orbit gaps in the Global Surveys, and were conducted in any of three basic modes: stare, transect, step-and-stare. The mode used depended on the science requirement. Each limb observation Limb 1, Limb 2 and Limb 3, were

TL2O3LN_7 is the Tropospheric Emission Spectrometer (TES)/Aura Level 2 Ozone Lite Nadir Version 7 data product. TES Level 2 data contain retrieved species (or temperature) profiles at the observation targets and the estimated errors. The geolocation, quality, and other data (e.g., surface characteristics for nadir observations) are also provided. L2 modeled spectra are evaluated using radiative transfer modeling algorithms. The process, referred to as retrieval, compares observed spectra to the modeled spectra and iteratively updates the atmospheric parameters. L2 standard product files include information for one molecular species (or temperature) for an entire global survey or special observation run. A global survey consists of a maximum of 16 consecutive orbits.A nadir sequence within the TES Global Survey is a fixed number of observations within an orbit for a Global Survey. Prior to April 24, 2005, it consisted of two low resolution scans over the same ground locations. After April 24, 2005, Global Survey data consisted of three low resolution scans. The Nadir standard product consists of four files, where each file is composed of the Global Survey Nadir observations from one of four focal planes for a single orbit, i.e. 72 orbit sequences. The Global Survey Nadir observations currently only use a single set of filter mix. A Global Survey consists of observations along 16 consecutive orbits at the start of a two day cycle, over which 3,200 retrievals are performed. Each observation is the input for retrievals of species Volume Mixing Ratios (VMR), temperature profiles, surface temperature and other data parameters with associated pressure levels, precision, total error, vertical resolution, total column density and other diagnostic quantities. Each TES Level 2 standard product reports information in a swath format conforming to the HDF-EOS Aura File Format Guidelines. Each Swath object is bounded by the number of observations in a global survey and a predefined set of pressure levels representing slices through the atmosphere. Each standard product can have a variable number of observations depending upon the Global Survey configuration and whether averaging is employed. Also, missing or bad retrievals are not reported. The organization of data within the Swath object is based on a superset of the UARS pressure levels used to report concentrations of trace atmospheric gases. The reporting grid is the same pressure grid used for modeling. There are 67 reporting levels from 1211.53 hPa, which allows for very high surface pressure conditions, to 0.1 hPa, about 65 km. In addition, the products will report values directly at the surface when possible or at the observed cloud top level. Thus, in the Standard Product files each observation can potentially contain estimates for the concentration of a particular molecule at 67 different pressure levels within the atmosphere. However, for most retrieved profiles, the highest pressure levels are not observed due to a surface at lower pressure or cloud obscuration. For pressure levels corresponding to altitudes below the cloud top or surface, where measurements were not possible, a fill value will be applied.To minimize the duplication of information between the individual species standard products, data fields common to each species (such as spacecraft coordinates, emissivity, and other data fields) have been collected into a separate standard product, termed the TES L2 Ancillary Data product (ESDT short name: TL2ANC). Users of this product should also obtain the Ancillary Data product.

DSCOVR_EPIC_L2_SO2_v03 is the Deep Space Climate Observatory (DSCOVR) Enhanced Polychromatic Imaging Camera (EPIC) Level 2 Sulfur Dioxide (SO2) product with EPIC version 03 inputs. It has key ultraviolet (UV) channels suitable for retrieving volcanic sulfur dioxide (SO2) and ash, enabling timely tracking and forecasting of volcanic plumes and enhancing our ability to mitigate aviation hazards. EPIC measurements will also be co-located with all satellite UV and infrared sensors, offering ample opportunities for data inter-comparisons and demonstrating advanced retrievals of volcanic ash mass through a synergistic approach. We propose to implement our mature algorithms previously developed for Total Ozone Mapping Spectrometer (TOMS) and Ozone Monitoring Instrument (OMI) to enable SO2 and Ash Index (AI) products from EPIC UV observations to demonstrate improved estimates of volcanic SO2 and ash mass, height and sulfate aerosol loading.

TL2HDONS_8 is the Tropospheric Emission Spectrometer (TES)/Aura Level 2 Deuterium Oxide Nadir Special Observation Version 8 data product. TES was an instrument aboard NASA's Aura satellite and was launched from California on July 15, 2004. Data collection for TES is complete. TES Level 2 data contain retrieved species (or temperature) profiles at the observation targets and the estimated errors. The geolocation, quality, and other data (e.g., surface characteristics for nadir observations) were also provided. L2 modeled spectra were evaluated using radiative transfer modeling algorithms. The process, referred to as retrieval, compared observed spectra to the modeled spectra and iteratively updated the atmospheric parameters. L2 standard product files included information for one molecular species (or temperature) for an entire global survey or special observation run. A global survey consisted of a maximum of 16 consecutive orbits. Nadir observations, which point directly to the surface of the Earth are different from limb observations, which are pointed at various off-nadir angles into the atmosphere. Nadir and limb observations were added to separate L2 files, and a single ancillary file was composed of data that are common to both nadir and limb files. A Nadir sequence within the TES Global Survey was a fixed number of observations within an orbit for a Global Survey. Prior to April 24, 2005, it consisted of two low resolution scans over the same ground locations. After April 24, 2005, Global Survey data consisted of three low resolution scans. The Nadir standard product consists of four files, where each file is composed of the Global Survey Nadir observations from one of four focal planes for a single orbit, i.e. 72 orbit sequences. The Global Survey Nadir observations only used a single set of filter mix. A Global Survey consisted of observations along 16 consecutive orbits at the start of a two day cycle, over which 3,200 retrievals were performed. Each observation was the input for retrievals of species Volume Mixing Ratios (VMRs), temperature profiles, surface temperature, and other data parameters with associated pressure levels, precision, total error, vertical resolution, total column density, and other diagnostic quantities. Each TES Level 2 standard product reported information in a swath format conforming to the HDF-EOS Aura File Format Guidelines. Each Swath object was bounded by the number of observations in a global survey and a predefined set of pressure levels representing slices through the atmosphere. Each standard product could have had a variable number of observations depending upon the Global Survey configuration and whether averaging was employed. Also, missing or bad retrievals were not reported. Further, observations were occasionally scheduled on non-global survey days. In general they were measurements made for validation purposes or with highly focused science objectives. Those non-global survey measurements were referred to as “special observations”The organization of data within the Swath object was based on a superset of the Upper Atmosphere Research Satellite (UARS) pressure levels used to report concentrations of trace atmospheric gases. The reporting grid was the same pressure grid used for modeling. There were 67 reporting levels from 1211.53 hPa, which allowed for very high surface pressure conditions, to 0.1 hPa, about 65 km. In addition, the products reported values directly at the surface when possible or at the observed cloud top level. Thus in the Standard Product files, each observation could potentially contain estimates for the concentration of a particular molecule at 67 different pressure levels within the atmosphere. However, for most retrieved profiles, the highest pressure levels were not observed due to a surface at lower pressure or cloud obscuration. For pressure levels corresponding to altitudes below the cloud top or surface, where measurements were not possible, a fill

TL2CO2N_8 is the Tropospheric Emission Spectrometer (TES)/Aura Level 2 Carbon Dioxide Nadir Version 8 data product. TES was an instrument aboard NASA's Aura satellite and was launched from California on July 15, 2004. Data collection for TES is complete. TES Level 2 data contain retrieved species (or temperature) profiles at the observation targets and the estimated errors. The geolocation, quality, and other data (e.g., surface characteristics for nadir observations) were also provided. L2 modeled spectra were evaluated using radiative transfer modeling algorithms. The process, referred to as retrieval, compared observed spectra to the modeled spectra and iteratively updated the atmospheric parameters. L2 standard product files included information for one molecular species (or temperature) for an entire global survey or special observation run. A global survey consisted of a maximum of 16 consecutive orbits.Nadir observations, which point directly to the surface of the Earth, are different from limb observations, which are pointed at various off-nadir angles into the atmosphere. Nadir and limb observations were added to separate L2 files, and a single ancillary file was composed of data that are common to both nadir and limb files. A Nadir sequence within the TES Global Survey was a fixed number of observations within an orbit for a Global Survey. Prior to April 24, 2005, it consisted of two low resolution scans over the same ground locations. After April 24, 2005, Global Survey data consisted of three low resolution scans. The Nadir standard product consists of four files, where each file is composed of the Global Survey Nadir observations from one of four focal planes for a single orbit, i.e. 72 orbit sequences. The Global Survey Nadir observations only used a single set of filter mix. A Global Survey consisted of observations along 16 consecutive orbits at the start of a two day cycle, over which 4,608 retrievals were performed. Each observation was the input for retrievals of species Volume Mixing Ratios (VMRs), temperature profiles, surface temperature, and other data parameters with associated pressure levels, precision, total error, vertical resolution, total column density, and other diagnostic quantities. Each TES Level 2 standard product reported information in a swath format conforming to the HDF-EOS Aura File Format Guidelines. Each Swath object was bounded by the number of observations in a global survey and a predefined set of pressure levels, representing slices through the atmosphere. Each standard product could have had a variable number of observations depending upon the Global Survey configuration and whether averaging was employed. Also, missing or bad retrievals were not reported. Further, observations were occasionally scheduled on non-global survey days. In general they were measurements made for validation purposes or with highly focused science objectives. Those non-global survey measurements were referred to as “special observations.”A Limb sequence within the TES Global Survey was three high-resolution scans over the same limb locations. The Limb standard product consists of four files, where each file is composed of the Global Survey Limb observations from one of four focal planes for a single orbit, i.e. 72 orbit sequences. The Global Survey Limb observations used a repeating sequence of filter wheel positions. Special Observations could only be scheduled during the 9 or 10 orbit gaps in the Global Surveys, and were conducted in any of three basic modes: stare, transect, step-and-stare. The mode used depended on the science requirement. Each limb observation Limb 1, Limb 2 and Limb 3, were processed independently. Thus, each limb standard product consisted of three sets where each set consisted of 1,152 observations. For TES, the swath object represented one of these sets. Thus, each limb standard product consisted of three swath objects, one for each observation, Limb 1, Limb 2, and Limb 3. The

TL2SUP_8 is the the Tropospheric Emission Spectrometer (TES)/Aura Level 2 Supplemental Profiles Version 8 data product. It contains input data to the TES radiance forward model. These were profiles generated from climatology databases to be used in the forward model calculation but are not retrieved parameters. The process, referred to as retrieval, compared observed spectra to the modeled spectra and iteratively updates the atmospheric parameters. TES was an instrument aboard NASA's Aura satellite and was launched from California on July 15, 2004. Data collection for TES is complete. TES Level 2 data contain retrieved species (or temperature) profiles at the observation targets and the estimated errors. The geolocation, quality, and other data (e.g., surface characteristics for nadir observations) were also provided. L2 modeled spectra were evaluated using radiative transfer modeling algorithms. The process, referred to as retrieval, compared observed spectra to the modeled spectra and iteratively updated the atmospheric parameters. L2 standard product files included information for one molecular species (or temperature) for an entire global survey or special observation run. A global survey consisted of a maximum of 16 consecutive orbits. Each TES Level 2 standard product reported information in a swath format conforming to the HDF-EOS Aura File Format Guidelines.Nadir observations, which point directly to the surface of the Earth, are different from limb observations, which are pointed at various off-nadir angles into the atmosphere. Nadir and limb observations were added to separate L2 files, and a single ancillary file was composed of data that are common to both nadir and limb files. A Nadir sequence within the TES Global Survey was a fixed number of observations within an orbit for a Global Survey. Prior to April 24, 2005, it consisted of two low resolution scans over the same ground locations. After April 24, 2005, Global Survey data consisted of three low resolution scans. The Nadir standard product consists of four files, where each file is composed of the Global Survey Nadir observations from one of four focal planes for a single orbit, i.e. 72 orbit sequences. The Global Survey Nadir observations only used a single set of filter mix. A Global Survey consisted of observations along 16 consecutive orbits at the start of a two day cycle, over which 3,200 retrievals were performed. Each observation was the input for retrievals of species Volume Mixing Ratios (VMRs), temperature profiles, surface temperature, and other data parameters with associated pressure levels, precision, total error, vertical resolution, total column density, and other diagnostic quantities. Each TES Level 2 standard product reported information in a swath format conforming to the HDF-EOS Aura File Format Guidelines. Each Swath object was bounded by the number of observations in a global survey and a predefined set of pressure levels, representing slices through the atmosphere. Each standard product could have had a variable number of observations depending upon the Global Survey configuration and whether averaging was employed. Also, missing or bad retrievals were not reported. Further, observations were occasionally scheduled on non-global survey days. In general they were measurements made for validation purposes or with highly focused science objectives. Those non-global survey measurements were referred to as “special observations.”A Limb sequence within the TES Global Survey was three high-resolution scans over the same limb locations. The Limb standard product consists of four files, where each file is composed of the Global Survey Limb observations from one of four focal planes for a single orbit, i.e. 72 orbit sequences. The Global Survey Limb observations used a repeating sequence of filter wheel positions. Special Observations could only be scheduled during the 9 or 10 orbit gaps in the Global Surveys, and were conducted in any of