A Group for High Resolution Sea Surface Temperature (GHRSST) global Level 4 sea surface temperature analysis produced daily on a 0.25 degree grid at the NOAA National Climatic Data Center. This product uses optimal interpolation (OI) using data from the Advanced Very High Resolution Radiometer (AVHRR) Pathfinder Version 5 time series (when available, otherwise operational NOAA AVHRR data are used), the Advanced Microwave Scanning Radiometer-EOS (AMSR-E), and in situ ship and buoy observations. A second similar product is available back to 1981 that includes only in situ and AVHRR Pathfinder data in its analysis. The OI analysis is a daily average SST that is bias adjusted using a spatially smoothed 7-day in situ SST average and is thus tuned to about 0.3 meter. Both day and night satellite fields are independently bias adjusted. More information is available at http://www.ncdc.noaa.gov/oa/climate/research/sst/oi-daily.php.

A Group for High Resolution Sea Surface Temperature (GHRSST) global Level 4 sea surface temperature analysis is produced daily on a 0.25 degree grid at the NOAA National Centers for Environmental Information. This product uses optimal interpolation (OI) by interpolating and extrapolating SST observations from different sources, resulting in a smoothed complete field. The sources of data are satellite (AVHRR) and in situ platforms (i.e., ships, buoys, and Argo floats above 5m depth), and the specific datasets employed may change over time. In the regions with sea-ice concentration higher than 30%, freezing points of seawater are used to generate proxy SSTs. A preliminary version of this file is produced in near-real time (1-day latency), and then replaced with a final version after 2 weeks. The v2.1 is updated from the AVHRR_OI-NCEI-L4-GLOB-v2.0 data. Major improvements include: 1) In-Situ ship and buoy data changed from the NCEP Traditional Alphanumeric Codes (TAC) to the NCEI merged TAC + Binary Universal Form for the Representation (BUFR) data, with large increase of buoy data included to correct satellite SST biases; 2) Addition of Argo float observed SST data as well, for further correction of satellite SST biases; 3) Satellite input from the METOP-A and NOAA-19 to METOP-A and METOP-B, removing degraded satellite data; 4) Revised ship-buoy SST corrections for improved accuracy; and 5) Revised sea-ice-concentration to SST conversion to remove warm biases in the Arctic region (Banzon et al. 2020). These updates only apply to granules after Jan. 1st, 2016. The data pre 2016 are still the same as v2.0 except for metadata upgrades.

A Group for High Resolution Sea Surface Temperature (GHRSST) global Level 4 sea surface temperature analysis produced daily on a 0.25 degree grid at the NOAA National Centers for Environmental Information. This product uses optimal interpolation (OI) by interpolating and extrapolating SST observations from different sources, resulting in a smoothed complete field. The sources of data are satellite (AVHRR) and in situ platforms (i.e., ships and buoys), and the specific datasets employed may change over. At the marginal ice zone, sea ice concentrations are used to generate proxy SSTs. A preliminary version of this file is produced in near-real time (1-day latency), and then replaced with a final version after 2 weeks. Note that this is the AVHRR-ONLY (AVHRR-OI), available from September 1, 1981, but there is a companion SST product that includes microwave satellite data, available from June 2002.

A Group for High Resolution Sea Surface Temperature (GHRSST) global Level 4 sea surface temperature analysis produced daily on a 0.25 degree grid at the NOAA National Centers for Environmental Information. This product uses optimal interpolation (OI) by interpolating and extrapolating SST observations from different sources, resulting in a smoothed complete field. The sources of data are satellite (AVHRR) and in situ platforms (i.e., ships and buoys), and the specific datasets employed may change over. At the marginal ice zone, sea ice concentrations are used to generate proxy SSTs. A preliminary version of this file is produced in near-real time (1-day latency), and then replaced with a final version after 2 weeks. Note that this is the AVHRR-ONLY (AVHRR-OI), available from September 1, 1981, but there is a companion SST product that includes microwave satellite data, available from June 2002.

A Group for High Resolution Sea Surface Temperature (GHRSST) global Level 4 sea surface temperature dataset is produced daily on a 0.25 degree grid at the NOAA National Centers for Environmental Information. This product uses optimal interpolation (OI) by interpolating and extrapolating SST observations from different sources, resulting in a smoothed complete field. The sources of data are satellite (AVHRR) and in situ platforms (i.e., ships, buoys, and Argo floats above 5m depth), and the specific datasets employed may change over time. In the regions with sea-ice concentration higher than 30%, freezing points of seawater are used to generate proxy SSTs. A preliminary version of this dataset is produced in near-real time (1-day latency), and then replaced with a final version after 2 weeks. The v2.1 (Huang et al. 2021) is updated from the previous AVHRR_OI-NCEI-L4-GLOB-v2.0 data. Major improvements include: 1) In-situ ship and buoy data changed from the NCEP Traditional Alphanumeric Codes (TAC) to the NCEI merged TAC + Binary Universal Form for the Representation (BUFR) data, with large increases of buoy data included to correct satellite SST biases; 2) Addition of Argo float observed SST data as well, for further correction of satellite SST biases; 3) Satellite input from the METOP-A and NOAA-19 to METOP-A and METOP-B, removing degraded satellite data; 4) Revised ship-buoy SST corrections for improved accuracy; and 5) Revised sea-ice-concentration to SST conversion to remove warm biases in the Arctic region. These updates only apply to data after January 1st, 2016. The data pre 2016 are still the same as v2.0 except for metadata upgrades. NCEI has panned to update the entire dataset from 1982 to fix the In-Situ data ingest and bias correction which exist prior 2016.

A Group for High Resolution Sea Surface Temperature (GHRSST) global Level 4 sea surface temperature dataset is produced daily on a 0.25 degree grid at the NOAA National Centers for Environmental Information. This product uses optimal interpolation (OI) by interpolating and extrapolating SST observations from different sources, resulting in a smoothed complete field. The sources of data are satellite (AVHRR) and in situ platforms (i.e., ships, buoys, and Argo floats above 5m depth), and the specific datasets employed may change over time. In the regions with sea-ice concentration higher than 30%, freezing points of seawater are used to generate proxy SSTs. A preliminary version of this dataset is produced in near-real time (1-day latency), and then replaced with a final version after 2 weeks. The v2.1 (Huang et al. 2021) is updated from the previous AVHRR_OI-NCEI-L4-GLOB-v2.0 data. Major improvements include: 1) In-situ ship and buoy data changed from the NCEP Traditional Alphanumeric Codes (TAC) to the NCEI merged TAC + Binary Universal Form for the Representation (BUFR) data, with large increases of buoy data included to correct satellite SST biases; 2) Addition of Argo float observed SST data as well, for further correction of satellite SST biases; 3) Satellite input from the METOP-A and NOAA-19 to METOP-A and METOP-B, removing degraded satellite data; 4) Revised ship-buoy SST corrections for improved accuracy; and 5) Revised sea-ice-concentration to SST conversion to remove warm biases in the Arctic region. These updates only apply to data after January 1st, 2016. The data pre 2016 are still the same as v2.0 except for metadata upgrades. NCEI has panned to update the entire dataset from 1982 to fix the In-Situ data ingest and bias correction which exist prior 2016.

A Group for High Resolution Sea Surface Temperature (GHRSST) Level 4 sea surface temperature analysis, produced daily on an operational basis at the Australian Bureau of Meteorology (BoM) using optimal interpolation (OI) on a regional 1/12 degree grid over the Australian region (20N - 70S, 60E - 170W). This Regional Australian Multi-Sensor SST Analysis (RAMSSA) v1.0 system blends satellite SST observations from passive infrared and passive microwave radiometers, with in situ data from ships, Argo floats, XBTs, CTDs, drifting buoys and moorings from the Global Telecommunications System (GTS). SST observations that have experienced recent surface wind speeds less than 6 m/s during the day or less than 2 m/s during night are rejected from the analysis. The processing results in daily foundation SST estimates that are largely free of nocturnal cooling and diurnal warming effects. Sea ice concentrations are supplied by the NOAA/NCEP 12.7 km sea ice analysis. In the absence of observations, the analysis relaxes to the BoM Global Weekly 1 degree OI SST analysis, which relaxes to the Reynolds and Smith (1994) Monthly 1 degree SST climatology for 1961 - 1990.

A Group for High Resolution Sea Surface Temperature (GHRSST) Level 4 sea surface temperature analysis produced as a retrospective dataset (four day latency) and near-real-time dataset (one day latency) at the JPL Physical Oceanography DAAC using wavelets as basis functions in an optimal interpolation approach on a global 0.01 degree grid. The version 4 Multiscale Ultrahigh Resolution (MUR) L4 analysis is based upon nighttime GHRSST L2P skin and subskin SST observations from several instruments including the NASA Advanced Microwave Scanning Radiometer-EOS (AMSR-E), the JAXA Advanced Microwave Scanning Radiometer 2 on GCOM-W1, the Moderate Resolution Imaging Spectroradiometers (MODIS) on the NASA Aqua and Terra platforms, the US Navy microwave WindSat radiometer, the Advanced Very High Resolution Radiometer (AVHRR) on several NOAA satellites, and in situ SST observations from the NOAA iQuam project. The ice concentration data are from the archives at the EUMETSAT Ocean and Sea Ice Satellite Application Facility (OSI SAF) High Latitude Processing Center and are also used for an improved SST parameterization for the high-latitudes. The dataset also contains additional variables for some granules including a SST anomaly derived from a MUR climatology and the temporal distance to the nearest IR measurement for each pixel.This dataset is funded by the NASA MEaSUREs program ( http://earthdata.nasa.gov/our-community/community-data-system-programs/measures-projects ), and created by a team led by Dr. Toshio M. Chin from JPL. It adheres to the GHRSST Data Processing Specification (GDS) version 2 format specifications. Use the file global metadata "history:" attribute to determine if a granule is near-realtime or retrospective.

A Group for High Resolution Sea Surface Temperature (GHRSST) Level 4 sea surface temperature (SST) analysis produced daily on an operational basis by the Oceanographic Modeling and Observation Network (REMO) at Applied Meteorology Laboratory/Federal University of Rio de Janeiro (LMA/UFRJ) using the Barnes sub optimal interpolation (OI) technique on a regional 0.05 degree grid. REMO uses Advanced Very High Resolution Radiometer (AVHRR) data from National Oceanic and Atmospheric Administration (NOAA) satellites series (NOAA 15, NOAA 16, NOAA 17, NOAA 18 and NOAA 19) and Microwave Imager (TMI) data from Tropical Rainfall Measuring Mission (TRMM) which is a joint mission between NASA and the Japan Aerospace Exploration Agency (JAXA) to generate 0.05 degree daily cloud free blended (infrared and microwave) SST products (approximately 5.5 km). The data lies between latitudes 45 S and 15 N and longitudes 70 W and 15 W region and are fully validated by in situ measurements from eleven buoys of Prediction and Research Moored Array in the Tropical Atlantic (PIRATA).AVHRR is a scanning radiometer capable of detecting energy from land, ocean and atmosphere. It operates with six spectral bands arranged in the regions of visible and infrared region. TRMM was launched in December, 1997, having an orbital inclination of 53 degree and altitude 350 km, an equatorial orbit that ranges from 40 N to 40 S and a spatial resolution of 0.25 degree (∼27.75 km). Although infrared AVHRR SST data have high spatial resolution, they are contaminated by cloud cover and aerosols, while lower resolution microvwave TMI data are barely influenced by these.

A Group for High Resolution Sea Surface Temperature (GHRSST) Level 4 sea surface temperature analysis, produced daily on an operational basis at the Australian Bureau of Meteorology (BoM) using optimal interpolation (OI) on a regional 1/12 degree grid over the Australian region (20N - 70S, 60E - 170W). This Regional Australian Multi-Sensor SST Analysis (RAMSSA) v1.0 system blends satellite SST observations from passive infrared and passive microwave radiometers, with in situ data from ships, Argo floats, XBTs, CTDs, drifting buoys and moorings from the Global Telecommunications System (GTS). SST observations that have experienced recent surface wind speeds less than 6 m/s during the day or less than 2 m/s during night are rejected from the analysis. The processing results in daily foundation SST estimates that are largely free of nocturnal cooling and diurnal warming effects. Sea ice concentrations are supplied by the NOAA/NCEP 12.7 km sea ice analysis. In the absence of observations, the analysis relaxes to the BoM Global Weekly 1 degree OI SST analysis, which relaxes to the Reynolds and Smith (1994) Monthly 1 degree SST climatology for 1961 - 1990.