Gridded bathymetry shelf, bank and slope environments of Ni'ihau Island. This 5 m grid contains data between 0 and 100 meters. The netCDF and Arc ASCII grids include multibeam bathymetry from the Simrad EM300 and Reson 8101 multibeam sonars collected as of December 2009 by the NOAA Coral Reef Ecosystem Division. The sonar frequencies are 30 and 240 kHz respectively.

Gridded bathymetry (10m) of Kahoolawe Island, Hawaii, USA. The data include multibeam bathymetry from the EM120, EM122, EM710, EM1020, and EM1002 multibeam sonar collected by the Hawai'i Undersea Research Laboratory of the University of Hawaii in depths between -30 and -1300 meters. Data processing was done for distribution by the NOAA Coral Reef Ecosystem Division.

Gridded bathymetry of the shelf and slope environments of Midway Atoll, Hawaii, USA. Bottom coverage was achieved in depths between 0 and 200 meters. The ASCII includes multibeam bathymetry from the Simrad EM300, Simrad EM3002d, and Reson 8101 multibeam sonars collected as of December 2011 by the NOAA Coral Reef Ecosystem Division

File 100-102b is a 60-m ASCII grid of depth data collected near Midway Atoll in the Northwestern Hawaiian Islands as of May 2003. This grid has been produced as part of the "Bathymetric Atlas of the Northwestern Hawaiian Islands -- A Planning Document for Benthic Habitat Mapping -- Draft -- May 2003. Data sources for the downloadable grids include: multibeam bathymetry from Simrad EM1002 and EM120 sonars aboard the R/V Kilo Moana collected in October/November 2003; multibeam bathymetry data from a SeaBeam 210 sonar aboard the R/V Kai'imikai-O-Kanaloa collected in 2000-2002; LIDAR data obtained using the LADS MK II lidar system; and depth data derived from IKONOS satellite imagery. No tidal corrections have been applied to the data. The data source location for each type of data is indicated in the "dot plot" browse objects. Additional single-beam bathymetric data are available in this area and are indicated on the 100-102b Plot C browse object, but these less accurate depths are not included in the downloadable grid. Multibeam data were processed using SABER editing software and MBSystem and multibeam, LIDAR and IKONOS data were integrated using MBSystem, and GMT. Grid spacing is 60-m, horizontal accuracy is 20m (no differential GPS correctors applied), vertical accuracy is depth dependent (~1% of water depth), WGS84 datum. These data are not to be used for navigation.

File 100-101b is a 60-m ASCII grid of depth data collected near Kure Atoll in the Northwestern Hawaiian Islands as of May 2003. This grid has been produced as part of the "Bathymetric Atlas of the Northwestern Hawaiian Islands -- A Planning Document for Benthic Habitat Mapping -- Draft -- May 2003. Data sources for the downloadable grids include: multibeam bathymetry from Simrad EM1002 and EM120 sonars aboard the R/V Kilo Moana collected in October/November 2003; multibeam bathymetry data from a SeaBeam 210 sonar aboard the R/V Kai'imikai-O-Kanaloa collected in 2000-2002; LIDAR data obtained using the LADS MK II lidar system; and depth data derived from IKONOS satellite imagery. No tidal corrections have been applied to the data. The data source location for each type of data is indicated in the "dot plot" browse objects. Additional single-beam bathymetric data are available in this area and are indicated on the 100-101b Plot C browse object, but these less accurate depths are not included in the downloadable grid. Multibeam data were processed using SABER editing software and MBSystem and multibeam, LIDAR and IKONOS data were integrated using MBSystem, and GMT. Grid spacing is 60-m, horizontal accuracy is 20m (no differential GPS correctors applied), vertical accuracy is depth dependent (~1% of water depth), WGS84 datum. These data are not to be used for navigation.

File 100-001b is a 60-m ASCII grid of depth data collected near Lisianski Island in the Northwestern Hawaiian Islands as of May 2003. This grid has been produced as part of the "Bathymetric Atlas of the Northwestern Hawaiian Islands -- A Planning Document for Benthic Habitat Mapping -- Draft -- May 2003. Data sources for the downloadable grids include: multibeam bathymetry from Simrad EM1002 and EM120 sonars aboard the R/V Kilo Moana collected in October/November 2003; multibeam bathymetry data from a SeaBeam 210 sonar aboard the R/V Kai'imikai-O-Kanaloa collected in 2000-2002; LIDAR data obtained using the LADS MK II lidar system; and depth data derived from IKONOS satellite imagery. No tidal corrections have been applied to the data. The data source location for each type of data is indicated in the "dot plot" browse objects. Additional single-beam bathymetric data are available in this area and are indicated on the 100-001b Plot C browse object, but these less accurate depths are not included in the downloadable grid. Multibeam data were processed using SABER editing software and MBSystem and multibeam, LIDAR and IKONOS data were integrated using MBSystem, and GMT. Grid spacing is 60-m, horizontal accuracy is 20m (no differential GPS correctors applied), vertical accuracy is depth dependent (~1% of water depth), WGS84 datum. These data are not to be used for navigation.

File 100-006b is a 60-m ASCII grid of depth data collected near Laysan Island in the Northwestern Hawaiian Islands as of May 2003. This grid has been produced as part of the "Bathymetric Atlas of the Northwestern Hawaiian Islands -- A Planning Document for Benthic Habitat Mapping -- Draft -- May 2003. Data sources for the downloadable grids include: multibeam bathymetry from Simrad EM1002 and EM120 sonars aboard the R/V Kilo Moana collected in October/November 2003; multibeam bathymetry data from a SeaBeam 210 sonar aboard the R/V Kai'imikai-O-Kanaloa collected in 2000-2002; LIDAR data obtained using the LADS MK II lidar system; and depth data derived from IKONOS satellite imagery. No tidal corrections have been applied to the data. The data source location for each type of data is indicated in the "dot plot" browse objects. Additional single-beam bathymetric data are available in this area and are indicated on the 100-006b Plot C browse object, but these less accurate depths are not included in the downloadable grid. Multibeam data were processed using SABER editing software and MBSystem and multibeam, LIDAR and IKONOS data were integrated using MBSystem, and GMT. Grid spacing is 60-m, horizontal accuracy is 20m (no differential GPS correctors applied), vertical accuracy is depth dependent (~1% of water depth), WGS84 datum. These data are not to be used for navigation.

File 100-103b is a 60-m ASCII grid of depth data collected near Pearl and Hermes Atoll in the Northwestern Hawaiian Islands as of May 2003. This grid has been produced as part of the "Bathymetric Atlas of the Northwestern Hawaiian Islands -- A Planning Document for Benthic Habitat Mapping -- Draft -- May 2003. Data sources for the downloadable grids include: multibeam bathymetry from Simrad EM1002 and EM120 sonars aboard the R/V Kilo Moana collected in October/November 2003; multibeam bathymetry data from a SeaBeam 210 sonar aboard the R/V Kai'imikai-O-Kanaloa collected in 2000-2002; LIDAR data obtained using the LADS MK II lidar system; and depth data derived from IKONOS satellite imagery. No tidal corrections have been applied to the data. The data source location for each type of data is indicated in the "dot plot" browse objects. Additional single-beam bathymetric data are available in this area and are indicated on the 100-103b Plot C browse object, but these less accurate depths are not included in the downloadable grid. Multibeam data were processed using SABER editing software and MBSystem and multibeam, LIDAR and IKONOS data were integrated using MBSystem, and GMT. Grid spacing is 60-m, horizontal accuracy is 20m (no differential GPS correctors applied), vertical accuracy is depth dependent (approximately 1 percent of water depth), WGS84 datum. These data are not to be used for navigation.

File 100-007b is a 60-m ASCII grid of depth data collected near Maro Reef in the Northwestern Hawaiian Islands as of May 2003. This grid has been produced as part of the "Bathymetric Atlas of the Northwestern Hawaiian Islands -- A Planning Document for Benthic Habitat Mapping -- Draft -- May 2003. Data sources for the downloadable grids include: multibeam bathymetry from Simrad EM1002 and EM120 sonars aboard the R/V Kilo Moana collected in October/November 2003; multibeam bathymetry data from a SeaBeam 210 sonar aboard the R/V Kai'imikai-O-Kanaloa collected in 2000-2002; LIDAR data obtained using the LADS MK II lidar system; and depth data derived from IKONOS satellite imagery. No tidal corrections have been applied to the data. The data source location for each type of data is indicated in the "dot plot" browse objects. Additional single-beam bathymetric data are available in this area and are indicated on the 100-007b Plot C browse object, but these less accurate depths are not included in the downloadable grid. Multibeam data were processed using SABER editing software and MBSystem and multibeam, LIDAR and IKONOS data were integrated using MBSystem, and GMT. Grid spacing is 60-m, horizontal accuracy is 20m (no differential GPS correctors applied), vertical accuracy is depth dependent (~1% of water depth), WGS84 datum. These data are not to be used for navigation.

File 100-026b is a 60-m ASCII grid of depth data collected near Nihoa & Transit to Kauai in the Northwestern Hawaiian Islands as of May 2003. This grid has been produced as part of the "Bathymetric Atlas of the Northwestern Hawaiian Islands -- A Planning Document for Benthic Habitat Mapping -- Draft -- May 2003. Data sources for the downloadable grids include: multibeam bathymetry from Simrad EM1002 and EM120 sonars aboard the R/V Kilo Moana collected in October/November 2003; multibeam bathymetry data from a SeaBeam 210 sonar aboard the R/V Kai'imikai-O-Kanaloa collected in 2000-2002; LIDAR data obtained using the LADS MK II lidar system; and depth data derived from IKONOS satellite imagery. No tidal corrections have been applied to the data. The data source location for each type of data is indicated in the "dot plot" browse objects. Additional single-beam bathymetric data are available in this area and are indicated on the 100-026b Plot C browse object, but these less accurate depths are not included in the downloadable grid. Multibeam data were processed using SABER editing software and MBSystem and multibeam, LIDAR and IKONOS data were integrated using MBSystem, and GMT. Grid spacing is 60-m, horizontal accuracy is 20m (no differential GPS correctors applied), vertical accuracy is depth dependent (~1% of water depth), WGS84 datum. These data are not to be used for navigation.