File 100-025b is a 60-m ASCII grid of depth data collected near Nihoa Island in the Northwestern Hawaiian Islands as of May 2003. This grid has been produced as part of the "Bathymetric Atlas of the Northwestern Hawaiian Islands -- A Planning Document for Benthic Habitat Mapping -- Draft -- May 2003. Data sources for the downloadable grids include: multibeam bathymetry from Simrad EM1002 and EM120 sonars aboard the R/V Kilo Moana collected in October/November 2003; multibeam bathymetry data from a SeaBeam 210 sonar aboard the R/V Kai'imikai-O-Kanaloa collected in 2000-2002; LIDAR data obtained using the LADS MK II lidar system; and depth data derived from IKONOS satellite imagery. No tidal corrections have been applied to the data. The data source location for each type of data is indicated in the "dot plot" browse objects. Additional single-beam bathymetric data are available in this area and are indicated on the 100-025b Plot C browse object, but these less accurate depths are not included in the downloadable grid. Multibeam data were processed using SABER editing software and MBSystem and multibeam, LIDAR and IKONOS data were integrated using MBSystem, and GMT. Grid spacing is 60-m, horizontal accuracy is 20m (no differential GPS correctors applied), vertical accuracy is depth dependent (~1% of water depth), WGS84 datum. These data are not to be used for navigation.

Gridded bathymetry (5m) of the shelf environment of Nihoa Island, Hawaii, USA. This netCDF grid includes multibeam bathymetry from the Simrad EM120, Simrad EM1002, Simrad EM300, and Simrad EM3002d multibeam sonars collected as of December 2006 by the NOAA Coral Reef Ecosystem Division in depths between 20 and 500 meters.

File 100-026b is a 60-m ASCII grid of depth data collected near Nihoa & Transit to Kauai in the Northwestern Hawaiian Islands as of May 2003. This grid has been produced as part of the "Bathymetric Atlas of the Northwestern Hawaiian Islands -- A Planning Document for Benthic Habitat Mapping -- Draft -- May 2003. Data sources for the downloadable grids include: multibeam bathymetry from Simrad EM1002 and EM120 sonars aboard the R/V Kilo Moana collected in October/November 2003; multibeam bathymetry data from a SeaBeam 210 sonar aboard the R/V Kai'imikai-O-Kanaloa collected in 2000-2002; LIDAR data obtained using the LADS MK II lidar system; and depth data derived from IKONOS satellite imagery. No tidal corrections have been applied to the data. The data source location for each type of data is indicated in the "dot plot" browse objects. Additional single-beam bathymetric data are available in this area and are indicated on the 100-026b Plot C browse object, but these less accurate depths are not included in the downloadable grid. Multibeam data were processed using SABER editing software and MBSystem and multibeam, LIDAR and IKONOS data were integrated using MBSystem, and GMT. Grid spacing is 60-m, horizontal accuracy is 20m (no differential GPS correctors applied), vertical accuracy is depth dependent (~1% of water depth), WGS84 datum. These data are not to be used for navigation.

Gridded bathymetry of the shelf and slope environments of Midway Atoll, Hawaii, USA. Bottom coverage was achieved in depths between 0 and 200 meters. The ASCII includes multibeam bathymetry from the Simrad EM300, Simrad EM3002d, and Reson 8101 multibeam sonars collected as of December 2011 by the NOAA Coral Reef Ecosystem Division

5-m grid of bathymetric data of Kohala coast of Hawaii, Main Hawaiian Islands, USA. The ASCII grids include multibeam bathymetry from the Reson 8101 multibeam sonar collected by the National Oceanic and Atmospheric Administration (NOAA) survey launch Acoustic Habitat Investigator (AHI) in 2012 of Kohala coast of Hawaii by the NOAA Coral Reef Ecosystem Division in depths between 0 And 157.4 meters. The 5-m grid also contains synthesis bathymetric data maintained by University of Hawaii at Manoa (UH) Hawaii Mapping Research Group (HMRG).

Gridded bathymetry (5m) of the shelf environment of Nihoa Island, Hawaii, USA. The ASCII includes multibeam bathymetry data from the Simrad EM120, Simrad EM1002, Simrad EM300, Simrad EM3002d multibeam sonars collected as of December 2006 by the NOAA Coral Reef Ecosystem Division in depths between 10 and 500 meters.

Gridded bathymetry (20m) of the shelf and slope environments of Nihoa Island, Hawaii, USA. The netCDF includes multibeam bathymetry from the Simrad EM120, Simrad EM1002 Simrad EM300, Simrad EM3002d multibeam sonars collected as of October 2006 by the NOAA Coral Reef Ecosystem Division in depths between 20 and 1000 meters.

Gridded bathymetry (10m) of Kahoolawe Island, Hawaii, USA. The data include multibeam bathymetry from the EM120, EM122, EM710, EM1020, and EM1002 multibeam sonar collected by the Hawai'i Undersea Research Laboratory of the University of Hawaii in depths between -30 and -1300 meters. Data processing was done for distribution by the NOAA Coral Reef Ecosystem Division.

File 100-027b is a 60-m ASCII grid of depth data collected near Transit to Nihoa in the Northwestern Hawaiian Islands as of May 2003. This grid has been produced as part of the "Bathymetric Atlas of the Northwestern Hawaiian Islands -- A Planning Document for Benthic Habitat Mapping -- Draft -- May 2003. Data sources for the downloadable grids include: multibeam bathymetry from Simrad EM1002 and EM120 sonars aboard the R/V Kilo Moana collected in October/November 2003; multibeam bathymetry data from a SeaBeam 210 sonar aboard the R/V Kai'imikai-O-Kanaloa collected in 2000-2002; LIDAR data obtained using the LADS MK II lidar system; and depth data derived from IKONOS satellite imagery. No tidal corrections have been applied to the data. The data source location for each type of data is indicated in the "dot plot" browse objects. Additional single-beam bathymetric data are available in this area and are indicated on the 100-027b Plot C browse object, but these less accurate depths are not included in the downloadable grid. Multibeam data were processed using SABER editing software and MBSystem and multibeam, LIDAR and IKONOS data were integrated using MBSystem, and GMT. Grid spacing is 60-m, horizontal accuracy is 20m (no differential GPS correctors applied), vertical accuracy is depth dependent (~1% of water depth), WGS84 datum. These data are not to be used for navigation.

File 100-006b is a 60-m ASCII grid of depth data collected near Laysan Island in the Northwestern Hawaiian Islands as of May 2003. This grid has been produced as part of the "Bathymetric Atlas of the Northwestern Hawaiian Islands -- A Planning Document for Benthic Habitat Mapping -- Draft -- May 2003. Data sources for the downloadable grids include: multibeam bathymetry from Simrad EM1002 and EM120 sonars aboard the R/V Kilo Moana collected in October/November 2003; multibeam bathymetry data from a SeaBeam 210 sonar aboard the R/V Kai'imikai-O-Kanaloa collected in 2000-2002; LIDAR data obtained using the LADS MK II lidar system; and depth data derived from IKONOS satellite imagery. No tidal corrections have been applied to the data. The data source location for each type of data is indicated in the "dot plot" browse objects. Additional single-beam bathymetric data are available in this area and are indicated on the 100-006b Plot C browse object, but these less accurate depths are not included in the downloadable grid. Multibeam data were processed using SABER editing software and MBSystem and multibeam, LIDAR and IKONOS data were integrated using MBSystem, and GMT. Grid spacing is 60-m, horizontal accuracy is 20m (no differential GPS correctors applied), vertical accuracy is depth dependent (~1% of water depth), WGS84 datum. These data are not to be used for navigation.