,

,

,This is a national data collection of data resources managed by the Bureau of Ocean Energy Management (BOEM) for the Outer Continental Shelf (OCS). The data collection is designated as a National Geospatial Data Asset (NGDA) and includes: OCS BOEM Offshore Boundary Lines (Submerged Lands Act Boundary, OCSLA Limit of “8(g) Zone,” and Continental Shelf Boundary), OCS Protraction Polygons - 1st Division, OCS Gulf of Mexico NAD27 Protraction Polygons - 1st Division, OCS Block Polygons - 2nd Division, OCS Gulf of Mexico NAD27 Block Polygons - 2nd Division, and Aliquot 16ths Polygons - 3rd Division.,,All polygons are clipped to the Submerged Land Act Boundary and Continental Shelf Boundaries reflecting federal jurisdiction. The NAD27 Gulf of Mexico Protractions and Blocks have a different protraction and block configuration when compared to the OCS Protraction Polygons - 1st Division and OCS Block Polygons - 2nd Division. The NAD27 Gulf of Mexico data is used for Oil and Gas leasing.,,These data were created in the applicable NAD83 UTM or NAD27 UTM/SPCS Projection and re-projected to GCS WGS84 (EPSG 4326) for management in BOEM"s enterprise GIS. However, the services in this collection have been published in WGS 1984 Web Mercator Auxiliary Sphere (EPSG 3857). Because GIS projection and topology functions can change or generalize coordinates,these data are NOT an OFFICIAL record for the exact boundaries. These data are to be used for Cartographic purposes only and should not be used to calculate area.,Layers Metadata,OCS BOEM Offshore Boundary Lines,OCS Protraction Polygons - 1st Division,OCS Gulf of Mexico NAD27 Protraction Polygons - 1st Division,OCS Block Polygons - 2nd Division,OCS Gulf of Mexico NAD27 Block Polygons - 2nd Division,Aliquot 16ths Polygons - 3rd Division,

,This is a national data collection of data resources managed by the Bureau of Ocean Energy Management (BOEM) for the Outer Continental Shelf (OCS). The data collection is designated as a National Geospatial Data Asset (NGDA) and includes: OCS BOEM Offshore Boundary Lines (Submerged Lands Act Boundary, OCSLA Limit of “8(g) Zone,” and Continental Shelf Boundary), OCS Protraction Polygons - 1st Division, OCS Gulf of Mexico NAD27 Protraction Polygons - 1st Division, OCS Block Polygons - 2nd Division, OCS Gulf of Mexico NAD27 Block Polygons - 2nd Division, Aliquot 16ths Polygons - 3rd Division, and OCS Withdrawal Areas.,All polygons are clipped to the Submerged Land Act Boundary and Continental Shelf Boundaries reflecting federal jurisdiction. The Withdrawals depict areas that are permanently or temporarily withdrawn from Outer Continental Shelf leasing or one or all the resources that BOEM manages. The NAD27 Gulf of Mexico Protractions and Blocks have a different protraction and block configuration when compared to the OCS Protraction Polygons - 1st Division and OCS Block Polygons - 2nd Division. The NAD27 Gulf of Mexico data is used for Oil and Gas leasing.,These data were created in the applicable NAD83 UTM or NAD27 UTM/SPCS Projection and re-projected to GCS WGS84 (EPSG 4326) for management in BOEM's enterprise GIS. However, the services in this collection have been published in WGS 1984 Web Mercator Auxiliary Sphere (EPSG 3857). Because GIS projection and topology functions can change or generalize coordinates, these data are NOT an OFFICIAL record for the exact boundaries. These data are to be used for Cartographic purposes only and should not be used to calculate area.,Layers Metadata,OCS BOEM Offshore Boundary Lines,OCS Protraction Polygons - 1st Division,OCS Gulf of Mexico NAD27 Protraction Polygons - 1st Division,OCS Block Polygons - 2nd Division,OCS Gulf of Mexico NAD27 Block Polygons - 2nd Division,Aliquot 16ths Polygons - 3rd Division,OCS Withdrawal Areas,

,This is a national data collection of data resources managed by the Bureau of Ocean Energy Management (BOEM) for the Outer Continental Shelf (OCS). The data collection is designated as a National Geospatial Data Asset (NGDA) and includes: OCS BOEM Offshore Boundary Lines (Submerged Lands Act Boundary, OCSLA Limit of “8(g) Zone,” and Continental Shelf Boundary), OCS Protraction Polygons - 1st Division, OCS Gulf of Mexico NAD27 Protraction Polygons - 1st Division, OCS Block Polygons - 2nd Division, OCS Gulf of Mexico NAD27 Block Polygons - 2nd Division, and Aliquot 16ths Polygons - 3rd Division.,,All polygons are clipped to the Submerged Land Act Boundary and Continental Shelf Boundaries reflecting federal jurisdiction. The NAD27 Gulf of Mexico Protractions and Blocks have a different protraction and block configuration when compared to the OCS Protraction Polygons - 1st Division and OCS Block Polygons - 2nd Division. The NAD27 Gulf of Mexico data is used for Oil and Gas leasing.,,These data were created in the applicable NAD83 UTM or NAD27 UTM/SPCS Projection and re-projected to GCS WGS84 (EPSG 4326) for management in BOEM"s enterprise GIS. However, the services in this collection have been published in WGS 1984 Web Mercator Auxiliary Sphere (EPSG 3857). Because GIS projection and topology functions can change or generalize coordinates,these data are NOT an OFFICIAL record for the exact boundaries. These data are to be used for Cartographic purposes only and should not be used to calculate area.,Layers Metadata,OCS BOEM Offshore Boundary Lines,OCS Protraction Polygons - 1st Division,OCS Gulf of Mexico NAD27 Protraction Polygons - 1st Division,OCS Block Polygons - 2nd Division,OCS Gulf of Mexico NAD27 Block Polygons - 2nd Division,Aliquot 16ths Polygons - 3rd Division,

,This is a national data collection of data resources managed by the Bureau of Ocean Energy Management (BOEM) for the Outer Continental Shelf (OCS). The data collection is designated as a National Geospatial Data Asset (NGDA) and includes: OCS BOEM Offshore Boundary Lines (Submerged Lands Act Boundary, OCSLA Limit of “8(g) Zone,” and Continental Shelf Boundary), OCS Protraction Polygons - 1st Division, OCS Gulf of Mexico NAD27 Protraction Polygons - 1st Division, OCS Block Polygons - 2nd Division, OCS Gulf of Mexico NAD27 Block Polygons - 2nd Division, and Aliquot 16ths Polygons - 3rd Division.,,All polygons are clipped to the Submerged Land Act Boundary and Continental Shelf Boundaries reflecting federal jurisdiction. The NAD27 Gulf of Mexico Protractions and Blocks have a different protraction and block configuration when compared to the OCS Protraction Polygons - 1st Division and OCS Block Polygons - 2nd Division. The NAD27 Gulf of Mexico data is used for Oil and Gas leasing.,,These data were created in the applicable NAD83 UTM or NAD27 UTM/SPCS Projection and re-projected to GCS WGS84 (EPSG 4326) for management in BOEM"s enterprise GIS. However, the services in this collection have been published in WGS 1984 Web Mercator Auxiliary Sphere (EPSG 3857). Because GIS projection and topology functions can change or generalize coordinates,these data are NOT an OFFICIAL record for the exact boundaries. These data are to be used for Cartographic purposes only and should not be used to calculate area.,Layers Metadata,OCS BOEM Offshore Boundary Lines,OCS Protraction Polygons - 1st Division,OCS Gulf of Mexico NAD27 Protraction Polygons - 1st Division,OCS Block Polygons - 2nd Division,OCS Gulf of Mexico NAD27 Block Polygons - 2nd Division,Aliquot 16ths Polygons - 3rd Division,

,This is a national data collection of data resources managed by the Bureau of Ocean Energy Management (BOEM) for the Outer Continental Shelf (OCS). The data collection is designated as a National Geospatial Data Asset (NGDA) and includes: OCS BOEM Offshore Boundary Lines (Submerged Lands Act Boundary, OCSLA Limit of “8(g) Zone,” and Continental Shelf Boundary), OCS Protraction Polygons - 1st Division, OCS Gulf of Mexico NAD27 Protraction Polygons - 1st Division, OCS Block Polygons - 2nd Division, OCS Gulf of Mexico NAD27 Block Polygons - 2nd Division, and Aliquot 16ths Polygons - 3rd Division.,,All polygons are clipped to the Submerged Land Act Boundary and Continental Shelf Boundaries reflecting federal jurisdiction. The NAD27 Gulf of Mexico Protractions and Blocks have a different protraction and block configuration when compared to the OCS Protraction Polygons - 1st Division and OCS Block Polygons - 2nd Division. The NAD27 Gulf of Mexico data is used for Oil and Gas leasing.,,These data were created in the applicable NAD83 UTM or NAD27 UTM/SPCS Projection and re-projected to GCS WGS84 (EPSG 4326) for management in BOEM"s enterprise GIS. However, the services in this collection have been published in WGS 1984 Web Mercator Auxiliary Sphere (EPSG 3857). Because GIS projection and topology functions can change or generalize coordinates,these data are NOT an OFFICIAL record for the exact boundaries. These data are to be used for Cartographic purposes only and should not be used to calculate area.,Layers Metadata,OCS BOEM Offshore Boundary Lines,OCS Protraction Polygons - 1st Division,OCS Gulf of Mexico NAD27 Protraction Polygons - 1st Division,OCS Block Polygons - 2nd Division,OCS Gulf of Mexico NAD27 Block Polygons - 2nd Division,Aliquot 16ths Polygons - 3rd Division,

This data set contains Official Protraction Diagram (OPD) outlines in ESRI Arc/Info export and Arc/View shape file formats for the BOEM Pacific Region. The use of OPD s makes it easier to refer to individual blocks within a region or planning area. Further information on the historic development of OPD s can be found in OCS Report BOEM 99-0006: Boundary Development on the Outer Continental Shelf. Because GIS projection and topology functions can change or generalize coordinates, these GIS files are NOT an OFFICIAL record for the exact OPD boundaries. Only the paper OPD or a digital image of them serve as OFFICIAL records.

This file represents the program areas of the Outer Continental Shelf that have been included in the 2012-2017 Outer Continental Shelf Oil and Gas Leasing Proposed Program for the Gulf of Mexico Region. The final program includes the Western, Central, and a small portion of the Eastern Planning Areas.

This product resulted from merging four regional datasets containing BOEM Planning Area outlines. The use of these Planning Areas makes it easier to refer to Official Protraction Diagrams (OPD) and individual blocks within a region. The Submerged Lands Act (SLA) boundary, along with the Continental Shelf Boundary (CSB), the Limit of Protraction were used to complete the polygons for the Planning Areas. Because GIS projection and topology functions can change or generalize coordinates, these GIS files are considered to be approximate and are NOT an OFFICIAL record for the exact block coordinates or areas. The Official Protraction Diagrams (OPDs) and Supplemental Official OCS Block Diagrams (SOBDs) serve as the legal definition for BOEM offshore boundary coordinates and area descriptions. If any discrepancies are found between these shapefiles and the OPDs and SOBDs, it is the OPD and SOBD diagrams which take precedence. The original datasets were developed in UTM. Here they are projected in WGS_1984_World_Mercator. As a result, any area values computed from this dataset may differ from the official BOEM areas.