SRM 1297 Stainless Steel (SAE 201)

공공데이터포털

SRM 1297 Stainless Steel (SAE 201) - 'This Standard Reference Material (SRM) is intended for use in optical emission and x-ray spectrometric methods of analysis. It is in the form of a disk approximately 32 mm in diameter and 19 mm thick. This data is public in the Certificate of Analysis for this material.

SRM 895 Stainless Steel (SAE 201)

공공데이터포털

This Standard Reference Material (SRM) is in the form of chips sized between 0.50 and 1.18 mm sieve openings (35 and 16 mesh). It is intended for use primarily in chemical methods of analysis. Similar material for use in spectrometric methods of analysis is available as SRM 1297. This data is public in the Certificate of Analysis for this material.

SRM 2685c Bituminous Coal (Nominal Mass Fraction 5 % Sulfur)

공공데이터포털

This Standard Reference Material (SRM) is intended primarily for use in the evaluation of techniques used in the analysis of coals and materials of a similar matrix. A unit of SRM 2685c consists of 50 g of bituminous coal ground to pass a 250 ?m (60 mesh) sieve, homogenized, and packaged in an amber glass bottle under an argon atmosphere, and sealed in an aluminized bag.

SRM 131h Refined Cast Iron

공공데이터포털

Standard Reference Material 131h Refined Cast Iron - This Standard Reference Material (SRM) is intended primarily for use in validation of chemical and instrumental methods of analysis. It can be used to validate value assignment of in-house reference materials and, if necessary, to calibrate carbon/sulfur analyzers. A unit of SRM 131h consists of a bottle containing 100 g of chips. This data is public in the Certificate of Analysis for this material.

SRM 2682c Subbituminous Coal (Nominal Mass Fraction 0.5 % Sulfur)

공공데이터포털

Standard Reference Material 2682c Subbituminous Coal (Nominal Mass Fraction 0.5 % Sulfur) - This Standard Reference Material (SRM) is intended primarily for use in the evaluation of techniques used in the analysis of coals and materials of a similar matrix. A unit of SRM 2682c consists of 50 g of subbituminous coal that was ground to pass a 250 µm (60 mesh) sieve, homogenized, packaged in an amber glass bottle under an argon atmosphere, and then sealed in an aluminized bag. This data is public in the Certificate of Analysis for this material.

SRM 2692c Bituminous Coal (Nominal Mass Fraction 1 % Sulfur)

공공데이터포털

SRM 2692c Bituminous Coal (Nominal Mass Fraction 1 % Sulfur) - This Standard Reference Material (SRM) is intended primarily for use in the evaluation of techniques employed in the determination of sulfur, mercury, chlorine, and ash content in coal and materials of a similar matrix. A unit of SRM 2692c consists of 50 g of bituminous coal ground to pass a 250 µm (60 mesh) sieve, homogenized, and packaged in an amber glass bottle. This data is public in the Certificate of Analysis for this material.

SRM 918c Potassium Chloride General and Ion Activity Standard

공공데이터포털

This Standard Reference Material (SRM) is intended for use as an analytical standard of known purity. It is intended primarily for use in the calibration and standardization of procedures for potassium (K) and chloride (Cl-) determinations employed in clinical analysis, including those using ion-selective electrodes, and for routine critical evaluation of the daily working standards used in these procedures. This lot of potassium chloride (KCl) was prepared to ensure a material of high purity and homogeneity and has been assayed after heating at 110 degrees C to 120 degrees C. A unit of SRM 918c consists of a single glass bottle containing 30 g of the material. This data is public in the Certificate of Analysis for this material.

SRM 3150 Silicon (Si) Standard Solution, Lot No. 130912

공공데이터포털

This Standard Reference Material (SRM) is intended for use as a primary calibration standard for the quantitative determination of silicon. A unit of SRM 3150 consists of 50 mL of solution prepared gravimetrically to contain a known mass fraction of silicon in a high-density polyethylene bottle sealed in an aluminized bag. The solution is prepared gravimetrically from sodium metasilicate nonahydrate to contain a known mass fraction of silicon in water. This data is public in the Certificate of Analysis for this material.

SRM 3147a Samarium (Sm) Standard Solution Lot No. 140115

공공데이터포털

This Standard Reference Material (SRM) is intended for use as a primary calibration standard for the quantitative determination of samarium. A unit of SRM 3147a consists of five 10 mL sealed borosilicate glass ampoules of an acidified aqueous solution prepared gravimetrically to contain a known mass fraction of samarium. The solution contains nitric acid at a volume fraction of approximately 10 %, which is equivalent to a concentration (molarity) of approximately 1.6 mol/L. This data is public in the Certificate of Analysis for this material.

SRM 635a Portland Cement (Blended with Slag)

공공데이터포털

SRM 635a Portland Cement (Blended with Slag) - This Standard Reference Material (SRM) is intended primarily for use in validation of chemical and instrumental methods of analysis of cements and materials of similar matrix for elemental contents. It can be used to validate value assignment of in-house reference materials. This data is public in the Certificate of Analysis for this material.