데이터셋 상세
미국
SRM 895 Stainless Steel (SAE 201)
This Standard Reference Material (SRM) is in the form of chips sized between 0.50 and 1.18 mm sieve openings (35 and 16 mesh). It is intended for use primarily in chemical methods of analysis. Similar material for use in spectrometric methods of analysis is available as SRM 1297. This data is public in the Certificate of Analysis for this material.
데이터 정보
연관 데이터
SRM 895 Stainless Steel (SAE 201)
공공데이터포털
This Standard Reference Material (SRM) is in the form of chips sized between 0.50 and 1.18 mm sieve openings (35 and 16 mesh). It is intended for use primarily in chemical methods of analysis. Similar material for use in spectrometric methods of analysis is available as SRM 1297. This data is public in the Certificate of Analysis for this material.
SRM 1297 Stainless Steel (SAE 201)
공공데이터포털
SRM 1297 Stainless Steel (SAE 201) - 'This Standard Reference Material (SRM) is intended for use in optical emission and x-ray spectrometric methods of analysis. It is in the form of a disk approximately 32 mm in diameter and 19 mm thick. This data is public in the Certificate of Analysis for this material.
SRM 1297 Stainless Steel (SAE 201)
공공데이터포털
SRM 1297 Stainless Steel (SAE 201) - 'This Standard Reference Material (SRM) is intended for use in optical emission and x-ray spectrometric methods of analysis. It is in the form of a disk approximately 32 mm in diameter and 19 mm thick. This data is public in the Certificate of Analysis for this material.
SRM 3151 Silver (Ag) Standard Solution Lot No. 160729
공공데이터포털
This Standard Reference Material (SRM) is intended for use as a primary calibration standard for the quantitative determination of silver. A unit of SRM 3151 consists of five 10 mL sealed borosilicate glass ampoules of an acidified aqueous solution prepared gravimetrically to contain a known mass fraction of silver. The solution contains nitric acid at a mass fraction of approximately 14 %. This data is public in the Certificate of Analysis for this material.
SRM 3101a Aluminum (Al) Standard Solution, Lot No. 140903
공공데이터포털
This Standard Reference Material (SRM) is intended for use as a primary calibration standard for the quantitative determination of aluminum. A unit of SRM 3101a consists of five 10 mL sealed borosilicate glass ampoules of an acidified aqueous solution prepared gravimetrically to contain a known mass fraction of aluminum. The solution contains nitric acid at a volume fraction of approximately 10 %, equivalent to an amount of substance concentration (molarity) of approximately 1.6 mol/L. This data is public in the Certificate of Analysis for this material.
SRM 918c Potassium Chloride General and Ion Activity Standard
공공데이터포털
This Standard Reference Material (SRM) is intended for use as an analytical standard of known purity. It is intended primarily for use in the calibration and standardization of procedures for potassium (K) and chloride (Cl-) determinations employed in clinical analysis, including those using ion-selective electrodes, and for routine critical evaluation of the daily working standards used in these procedures. This lot of potassium chloride (KCl) was prepared to ensure a material of high purity and homogeneity and has been assayed after heating at 110 degrees C to 120 degrees C. A unit of SRM 918c consists of a single glass bottle containing 30 g of the material. This data is public in the Certificate of Analysis for this material.
SRM 918c Potassium Chloride General and Ion Activity Standard
공공데이터포털
This Standard Reference Material (SRM) is intended for use as an analytical standard of known purity. It is intended primarily for use in the calibration and standardization of procedures for potassium (K) and chloride (Cl-) determinations employed in clinical analysis, including those using ion-selective electrodes, and for routine critical evaluation of the daily working standards used in these procedures. This lot of potassium chloride (KCl) was prepared to ensure a material of high purity and homogeneity and has been assayed after heating at 110 degrees C to 120 degrees C. A unit of SRM 918c consists of a single glass bottle containing 30 g of the material. This data is public in the Certificate of Analysis for this material.
SRM 635a Portland Cement (Blended with Slag)
공공데이터포털
SRM 635a Portland Cement (Blended with Slag) - This Standard Reference Material (SRM) is intended primarily for use in validation of chemical and instrumental methods of analysis of cements and materials of similar matrix for elemental contents. It can be used to validate value assignment of in-house reference materials. This data is public in the Certificate of Analysis for this material.
SRM 3133 Mercury (Hg) Standard Solution Lot No. 160921
공공데이터포털
This Standard Reference Material (SRM) is intended for use as a primary calibration standard for the quantitative determination of mercury. A unit of SRM 3133 consists of five 10 mL sealed borosilicate glass ampoules of an acidified aqueous solution prepared gravimetrically to contain a known mass fraction of mercury. The solution contains nitric acid at an approximate mass fraction of 10 %. This data is public in the Certificate of Analysis for this material.
SRM 3133 Mercury (Hg) Standard Solution Lot No. 160921
공공데이터포털
This Standard Reference Material (SRM) is intended for use as a primary calibration standard for the quantitative determination of mercury. A unit of SRM 3133 consists of five 10 mL sealed borosilicate glass ampoules of an acidified aqueous solution prepared gravimetrically to contain a known mass fraction of mercury. The solution contains nitric acid at an approximate mass fraction of 10 %. This data is public in the Certificate of Analysis for this material.