STAQS_INSTEP_Data is the trace gas data collected by the Inexpensive Network Sensor Technology Exploring Pollution (INSTEP) instrument during the Synergistic TEMPO Air Quality Science (STAQS) mission. Data collection for this product is complete. Launched in April 2023, NASA’s Tropospheric Emissions: Monitoring of Pollution (TEMPO) satellite monitors major air pollutants across North America every daylight hour at high spatial resolution at a geostationary orbit (GEO). With these measurements, NASA’s STAQS mission seeks to integrate TEMPO satellite observations with traditional air quality monitoring to improve understanding of air quality science and enhance societal benefit. STAQS is being conducted during summer 2023, targeting urban areas, including Los Angeles, New York City, and Chicago. As part of the mission two aircraft will be outfitted with various remote sensing payloads. The Johnson Space Center (JSC) Gulfstream-V (G-V) aircraft will feature the GeoCAPE Airborne Simulator (GCAS) and combined High Spectral Resolution Lidar-2 (HSRL-2) and Ozone Differential Absorption Lidar (DIAL). This payload provides repeated high-resolution mapping of NO2, HCHO, ozone, and aerosols up to 3x per day over targeted cities. NASA Langley Research Center’s (LaRC’s) Gulfstream-III will measure city-scale emissions 2x per day over the targeted cities with the High-Altitude Lidar Observatory (HALO) and Airborne Visible InfraRed Imaging Spectrometer – Next Generation (AVIRS-NG). STAQS will also incorporate ground-based tropospheric ozone profiles from the NASA Tropospheric Ozone Lidar Network (TOLNet), NO2, HCHO, and ozone measurements from Pandora spectrometers, and will leverage existing networks operated by the EPA and state air quality agencies. The primary goal of STAQS is to improve our current understanding of air quality science under the TEMPO field of regard. Further goals include evaluating TEMPO level 2 data products, interpreting the temporal and spatial evolution of air quality events tracked by TEMPO, improving temporal estimates of anthropogenic, biogenic, and greenhouse gas emissions, assessing the benefit of assimilating TEMPO data into chemical transport models, and linking air quality patterns to socio-demographic data.

STAQS_SeaRey_Data is the data collected onboard the Progressive Aerodyne SeaRey aircraft during the Synergistic TEMPO Air Quality Science (STAQS) mission. Data collection for this product is complete. Launched in April 2023, NASA’s Tropospheric Emissions: Monitoring of Pollution (TEMPO) satellite monitors major air pollutants across North America every daylight hour at high spatial resolution at a geostationary orbit (GEO). With these measurements, NASA’s STAQS mission seeks to integrate TEMPO satellite observations with traditional air quality monitoring to improve understanding of air quality science and enhance societal benefit. STAQS is being conducted during summer 2023, targeting urban areas, including Los Angeles, New York City, and Chicago. As part of the mission two aircraft will be outfitted with various remote sensing payloads. The Johnson Space Center (JSC) Gulfstream-V (G-V) aircraft will feature the GeoCAPE Airborne Simulator (GCAS) and combined High Spectral Resolution Lidar-2 (HSRL-2) and Ozone Differential Absorption Lidar (DIAL). This payload provides repeated high-resolution mapping of NO2, HCHO, ozone, and aerosols up to 3x per day over targeted cities. NASA Langley Research Center’s (LaRC’s) Gulfstream-III will measure city-scale emissions 2x per day over the targeted cities with the High-Altitude Lidar Observatory (HALO) and Airborne Visible InfraRed Imaging Spectrometer – Next Generation (AVIRS-NG). STAQS will also incorporate ground-based tropospheric ozone profiles from the NASA Tropospheric Ozone Lidar Network (TOLNet), NO2, HCHO, and ozone measurements from Pandora spectrometers, and will leverage existing networks operated by the EPA and state air quality agencies. The primary goal of STAQS is to improve our current understanding of air quality science under the TEMPO field of regard. Further goals include evaluating TEMPO level 2 data products, interpreting the temporal and spatial evolution of air quality events tracked by TEMPO, improving temporal estimates of anthropogenic, biogenic, and greenhouse gas emissions, assessing the benefit of assimilating TEMPO data into chemical transport models, and linking air quality patterns to socio-demographic data.

STAQS_Sondes_Data is the balloonsonde and ozonesonde data collected during the Synergistic TEMPO Air Quality Science (STAQS) mission. Data collection for this product is complete. Launched in April 2023, NASA’s Tropospheric Emissions: Monitoring of Pollution (TEMPO) satellite monitors major air pollutants across North America every daylight hour at high spatial resolution at a geostationary orbit (GEO). With these measurements, NASA’s STAQS mission seeks to integrate TEMPO satellite observations with traditional air quality monitoring to improve understanding of air quality science and enhance societal benefit. STAQS is being conducted during summer 2023, targeting urban areas, including Los Angeles, New York City, and Chicago. As part of the mission two aircraft will be outfitted with various remote sensing payloads. The Johnson Space Center (JSC) Gulfstream-V (G-V) aircraft will feature the GeoCAPE Airborne Simulator (GCAS) and combined High Spectral Resolution Lidar-2 (HSRL-2) and Ozone Differential Absorption Lidar (DIAL). This payload provides repeated high-resolution mapping of NO2, HCHO, ozone, and aerosols up to 3x per day over targeted cities. NASA Langley Research Center’s (LaRC’s) Gulfstream-III will measure city-scale emissions 2x per day over the targeted cities with the High-Altitude Lidar Observatory (HALO) and Airborne Visible InfraRed Imaging Spectrometer – Next Generation (AVIRS-NG). STAQS will also incorporate ground-based tropospheric ozone profiles from the NASA Tropospheric Ozone Lidar Network (TOLNet), NO2, HCHO, and ozone measurements from Pandora spectrometers, and will leverage existing networks operated by the EPA and state air quality agencies. The primary goal of STAQS is to improve our current understanding of air quality science under the TEMPO field of regard. Further goals include evaluating TEMPO level 2 data products, interpreting the temporal and spatial evolution of air quality events tracked by TEMPO, improving temporal estimates of anthropogenic, biogenic, and greenhouse gas emissions, assessing the benefit of assimilating TEMPO data into chemical transport models, and linking air quality patterns to socio-demographic data.

STRAT_Ground_Data is the ground site data collected during the Stratospheric Tracers of Atmospheric Transport (STRAT) campaign. Data from the JPL ozone lidar at Mauna Loa and Table Mountain, the Composition and Photo-Dissociative Flux Measurement (CPFM), and the Airborne Raman Ozone, Temperature, and Aerosol Lidar (AROTAL) are featured in this collection. Data collection for this product is complete. The STRAT campaign was a field campaign conducted by NASA from May 1995 to February 1996. The primary goal of STRAT was to collect measurements of the change of long-lived tracers and functions of altitude, latitude, and season. These measurements were taken to aid with determining rates for global-scale transport and future distributions of high-speed civil transport (HSCT) exhaust that was emitted into the lower atmosphere. STRAT had four main objectives: defining the rate of transport of trace gases from the stratosphere and troposphere (i.e., HSCT exhaust emissions), improving the understanding of dynamical coupling rates for transport of trace gases between tropical regions and higher latitudes and lower altitudes (between tropical regions, higher latitudes, and lower altitudes are where most ozone resides), improving understanding of chemistry in the upper troposphere and lower stratosphere, and finally, providing data sets for testing two-dimensional and three-dimensional models used in assessments of impacts from stratospheric aviation. To accomplish these objectives, the STRAT Science Team conducted various surface-based remote sensing and in-situ measurements. NASA flew the ER-2 aircraft along with balloons such as ozonesondes and radiosondes just below the tropopause in the Northern Hemisphere to collect data. Along with the ER-2 and balloons, NASA also utilized satellite imagery, theoretical models, and ground sites. The ER-2 collected data on HOx, NOy, CO2, ozone, water vapor, and temperature. The ER-2 also collected in-situ stratospheric measurements of N2O, CH4, CO, HCL, and NO using the Aircraft Laser Infrared Absorption Spectrometer (ALIAS). Ozonesondes and radiosondes were also deployed to collect data on CO2, NO/NOy, air temperature, pressure, and 3D wind. These balloons also took in-situ measurements of N2O, CFC-11, CH4, CO, HCL, and NO2 using the ALIAS. Ground stations were responsible for taking measurements of O3, ozone mixing ratio, pressure, and temperature. Satellites took infrared images of the atmosphere with the goal of aiding in completing STRAT objectives. Pressure and temperature models were created to help plan the mission.

STAQS_Chiwaukee-Prairie_Data is the data collected at the Chiwaukee Prairie site during the Synergistic TEMPO Air Quality Science (STAQS) mission. Data collection for this product is complete. Launched in April 2023, NASA’s Tropospheric Emissions: Monitoring of Pollution (TEMPO) satellite monitors major air pollutants across North America every daylight hour at high spatial resolution at a geostationary orbit (GEO). With these measurements, NASA’s STAQS mission seeks to integrate TEMPO satellite observations with traditional air quality monitoring to improve understanding of air quality science and enhance societal benefit. STAQS is being conducted during summer 2023, targeting urban areas, including Los Angeles, New York City, and Chicago. As part of the mission two aircraft will be outfitted with various remote sensing payloads. The Johnson Space Center (JSC) Gulfstream-V (G-V) aircraft will feature the GeoCAPE Airborne Simulator (GCAS) and combined High Spectral Resolution Lidar-2 (HSRL-2) and Ozone Differential Absorption Lidar (DIAL). This payload provides repeated high-resolution mapping of NO2, HCHO, ozone, and aerosols up to 3x per day over targeted cities. NASA Langley Research Center’s (LaRC’s) Gulfstream-III will measure city-scale emissions 2x per day over the targeted cities with the High-Altitude Lidar Observatory (HALO) and Airborne Visible InfraRed Imaging Spectrometer – Next Generation (AVIRS-NG). STAQS will also incorporate ground-based tropospheric ozone profiles from the NASA Tropospheric Ozone Lidar Network (TOLNet), NO2, HCHO, and ozone measurements from Pandora spectrometers, and will leverage existing networks operated by the EPA and state air quality agencies. The primary goal of STAQS is to improve our current understanding of air quality science under the TEMPO field of regard. Further goals include evaluating TEMPO level 2 data products, interpreting the temporal and spatial evolution of air quality events tracked by TEMPO, improving temporal estimates of anthropogenic, biogenic, and greenhouse gas emissions, assessing the benefit of assimilating TEMPO data into chemical transport models, and linking air quality patterns to socio-demographic data.

STAQS_Drone_Data is the PM 2.5 data collected by the BlueHalo E900 UAV during the Synergistic TEMPO Air Quality Science (STAQS) mission. Data collection for this product is complete. Launched in April 2023, NASA’s Tropospheric Emissions: Monitoring of Pollution (TEMPO) satellite monitors major air pollutants across North America every daylight hour at high spatial resolution at a geostationary orbit (GEO). With these measurements, NASA’s STAQS mission seeks to integrate TEMPO satellite observations with traditional air quality monitoring to improve understanding of air quality science and enhance societal benefit. STAQS is being conducted during summer 2023, targeting urban areas, including Los Angeles, New York City, and Chicago. As part of the mission two aircraft will be outfitted with various remote sensing payloads. The Johnson Space Center (JSC) Gulfstream-V (G-V) aircraft will feature the GeoCAPE Airborne Simulator (GCAS) and combined High Spectral Resolution Lidar-2 (HSRL-2) and Ozone Differential Absorption Lidar (DIAL). This payload provides repeated high-resolution mapping of NO2, HCHO, ozone, and aerosols up to 3x per day over targeted cities. NASA Langley Research Center’s (LaRC’s) Gulfstream-III will measure city-scale emissions 2x per day over the targeted cities with the High-Altitude Lidar Observatory (HALO) and Airborne Visible InfraRed Imaging Spectrometer – Next Generation (AVIRS-NG). STAQS will also incorporate ground-based tropospheric ozone profiles from the NASA Tropospheric Ozone Lidar Network (TOLNet), NO2, HCHO, and ozone measurements from Pandora spectrometers, and will leverage existing networks operated by the EPA and state air quality agencies. The primary goal of STAQS is to improve our current understanding of air quality science under the TEMPO field of regard. Further goals include evaluating TEMPO level 2 data products, interpreting the temporal and spatial evolution of air quality events tracked by TEMPO, improving temporal estimates of anthropogenic, biogenic, and greenhouse gas emissions, assessing the benefit of assimilating TEMPO data into chemical transport models, and linking air quality patterns to socio-demographic data.

SCOAPE_Ground_Data is the ground site data collected during the Satellite Coastal and Oceanic Atmospheric Pollution Experiment (SCOAPE). The ground site was located at the Louisiana Universities Marine Consortium (LUMCON; Cocodrie, LA). This collection features NO2 volume mixing ratios from the Teledyne API T500U and boundary layer height information from the UH Vaisala CL31 Ceilometer. Data collection for this product is complete. The Outer Continental Shelf Lands Act (OCSLA) requires the US Department of Interior Bureau of Ocean Energy Management (BOEM) to ensure compliance with the US National Ambient Air Quality Standard (NAAQS) so that Outer Continental Shelf (OCS) oil and natural gas (ONG) exploration, development, and production do not significantly impact the air quality of any US state. In 2017, BOEM and NASA entered into an interagency agreement to begin a study to scope out the feasibility of BOEM personnel using a suite of NASA and non-NASA resources to assess how pollutants from ONG exploration, development, and production activities affect air quality. An important activity of this interagency agreement was SCOAPE, a field deployment that took place in May 2019, that aimed to assess the capability of satellite observations for monitoring offshore air quality. The outcomes of the study are documented in two BOEM reports (Duncan, 2020; Thompson, 2020). To address BOEM’s goals, the SCOAPE science team conducted surface-based remote sensing and in-situ measurements, which enabled a systematic assessment of the application of satellite observations, primarily NO2, for monitoring air quality. The SCOAPE field measurements consisted of onshore ground sites, including in the vicinity of LUMCON, as well as those from University of Southern Mississippi’s Research Vessel (R/V) Point Sur, which cruised in the Gulf of Mexico from 10-18 May 2019. Based on the 2014 and 2017 BOEM emissions inventories as well as daily air quality and meteorological forecasts, the cruise track was designed to sample both areas with large oil drilling platforms and areas with dense small natural gas facilities. The R/V Point Sur was instrumented to carry out both remote sensing and in-situ measurements of NO2 and O3 along with in-situ CH4, CO2, CO, and VOC tracers which allowed detailed characterization of airmass type and emissions. In addition, there were also measurements of multi-wavelength AOD and black carbon as well as planetary boundary layer structure and meteorological variables, including surface temperature, humidity, and winds. A ship-based spectrometer instrument provided remotely-sensed total column amounts of NO2 and O3 for direct comparison with satellite measurements. Ozonesondes and radiosondes were also launched 1-3 times daily from the R/V Point Sur to provide O3 and meteorological vertical profile observations. The ground-based observations, primarily at LUMCON, included spectrometer-measured column NO2 and O3, in-situ NO2, VOCs, and planetary boundary layer structure. A NO2sonde was also mounted on a vehicle with the goal to detect pollution onshore from offshore ONG activities during onshore flow; data were collected along coastal Louisiana from Burns Point Park to Grand Isle to the tip of the Mississippi River delta. The in-situ measurements were reported in ICARTT files or Excel files. The remote sensing data are in either HDF or netCDF files.

STAQS_AircraftRemoteSensing_NASA-G3_HALO_Data is the remotely sensed trace gas data for the NASA Gulfstream III aircraft taken by the High Altitude Lidar Observatory (HALO) instrument as part of the Synergistic TEMPO Air Quality Science (STAQS) mission. Data collection for this product is complete. Launched in April 2023, NASA’s Tropospheric Emissions: Monitoring of Pollution (TEMPO) satellite monitors major air pollutants across North America every daylight hour at high spatial resolution at a geostationary orbit (GEO). With these measurements, NASA’s STAQS mission seeks to integrate TEMPO satellite observations with traditional air quality monitoring to improve understanding of air quality science and enhance societal benefit. STAQS is being conducted during summer 2023, targeting urban areas, including Los Angeles, New York City, and Chicago. As part of the mission two aircraft will be outfitted with various remote sensing payloads. The Johnson Space Center (JSC) Gulfstream-V (G-V) aircraft will feature the GeoCAPE Airborne Simulator (GCAS) and combined High Spectral Resolution Lidar-2 (HSRL-2) and Ozone Differential Absorption Lidar (DIAL). This payload provides repeated high-resolution mapping of NO2, HCHO, ozone, and aerosols up to 3x per day over targeted cities. NASA Langley Research Center’s (LaRC’s) Gulfstream-III will measure city-scale emissions 2x per day over the targeted cities with the High-Altitude Lidar Observatory (HALO) and Airborne Visible InfraRed Imaging Spectrometer – Next Generation (AVIRS-NG). STAQS will also incorporate ground-based tropospheric ozone profiles from the NASA Tropospheric Ozone Lidar Network (TOLNet), NO2, HCHO, and ozone measurements from Pandora spectrometers, and will leverage existing networks operated by the EPA and state air quality agencies. The primary goal of STAQS is to improve our current understanding of air quality science under the TEMPO field of regard. Further goals include evaluating TEMPO level 2 data products, interpreting the temporal and spatial evolution of air quality events tracked by TEMPO, improving temporal estimates of anthropogenic, biogenic, and greenhouse gas emissions, assessing the benefit of assimilating TEMPO data into chemical transport models, and linking air quality patterns to socio-demographic data.

ARCTAS_Ground_Data is the ground site data collected during the Arctic Research of the Composition of the Troposphere from Aircraft & Satellites sub-orbital campaign. The ground site was located at Barrow, Alaska. This data product features BrO measured by the MAX-DOAS method and data collection for this product is complete. The Arctic is a critical region in understanding climate change. The responses of the Arctic to environmental perturbations such as warming, pollution, and emissions from forest fires in boreal Eurasia and North America include key processes such as the melting of ice sheets and permafrost, a decrease in snow albedo, and the deposition of halogen radical chemistry from sea salt aerosols to ice. Arctic Research of the Composition of the Troposphere from Aircraft and Satellites (ARCTAS) was a field campaign that explored environmental processes related to the high degree of climate sensitivity in the Arctic. ARCTAS was part of NASA’s contribution to the International Global Atmospheric Chemistry (IGAC) Polar Study using Aircraft, Remote Sensing, Surface Measurements, and Models of Climate, Chemistry, Aerosols, and Transport (POLARCAT) Experiment for the International Polar Year 2007-2008. ARCTAS had four primary objectives. The first was to understand long-range transport of pollution to the Arctic. Pollution brought to the Arctic from northern mid-latitude continents has environmental consequences, such as modifying regional and global climate and affecting the ozone budget. Prior to ARCTAS, these pathways remained largely uncertain. The second objective was to understand the atmospheric composition and climate implications of boreal forest fires; the smoke emissions from which act as an atmospheric perturbation to the Arctic by impacting the radiation budget and cloud processes and contributing to the production of tropospheric ozone. The third objective was to understand aerosol radiative forcing from climate perturbations, as the Arctic is an important place for understanding radiative forcing due to the rapid pace of climate change in the region and its unique radiative environment. The fourth objective of ARCTAS was to understand chemical processes with a focus on ozone, aerosols, mercury, and halogens. Additionally, ARCTAS sought to develop capabilities for incorporating data from aircraft and satellites related to pollution and related environmental perturbations in the Arctic into earth science models, expanding the potential for those models to predict future environmental change. ARCTAS consisted of two, three-week aircraft deployments conducted in April and July 2008. The spring deployment sought to explore arctic haze, stratosphere-troposphere exchange, and sunrise photochemistry. April was chosen for the deployment phase due to historically being the peak in the seasonal accumulation of pollution from northern mid-latitude continents in the Arctic. The summer deployment sought to understand boreal forest fires at their most active seasonal phase in addition to stratosphere-troposphere exchange and summertime photochemistry. During ARCTAS, three NASA aircrafts, the DC-8, P-3B, and BE-200, conducted measurements and were equipped with suites of in-situ and remote sensing instrumentation. Airborne data was used in conjunction with satellite observations from AURA, AQUA, CloudSat, PARASOL, CALIPSO, and MISR. The ASDC houses ARCTAS aircraft data, along with data related to MISR, a satellite instrument aboard the Terra satellite which provides measurements that provide information about the Earth’s environment and climate.