SCOAPE_RVPointSur_Data is the data collected from instruments onboard the University of Southern Mississippi’s Research Vessel (R/V) Point Sur during the Satellite Coastal and Oceanic Atmospheric Pollution Experiment (SCOAPE). Data was collected by sun photometers, ceilometers, aethalometers, anemometers, and pyranometers. Data collection for this product is complete. The Outer Continental Shelf Lands Act (OCSLA) requires the US Department of Interior Bureau of Ocean Energy Management (BOEM) to ensure compliance with the US National Ambient Air Quality Standard (NAAQS) so that Outer Continental Shelf (OCS) oil and natural gas (ONG) exploration, development, and production do not significantly impact the air quality of any US state. In 2017, BOEM and NASA entered into an interagency agreement to begin a study to scope out the feasibility of BOEM personnel using a suite of NASA and non-NASA resources to assess how pollutants from ONG exploration, development, and production activities affect air quality. An important activity of this interagency agreement was SCOAPE, a field deployment that took place in May 2019, that aimed to assess the capability of satellite observations for monitoring offshore air quality. The outcomes of the study are documented in two BOEM reports (Duncan, 2020; Thompson, 2020). To address BOEM’s goals, the SCOAPE science team conducted surface-based remote sensing and in-situ measurements, which enabled a systematic assessment of the application of satellite observations, primarily NO2, for monitoring air quality. The SCOAPE field measurements consisted of onshore ground sites, including in the vicinity of the Louisiana Universities Marine Consortium (LUMCON; Cocodrie, LA), as well as those from University of Southern Mississippi’s R/V Point Sur, which cruised in the Gulf of Mexico from 10-18 May 2019. Based on the 2014 and 2017 BOEM emissions inventories as well as daily air quality and meteorological forecasts, the cruise track was designed to sample both areas with large oil drilling platforms and areas with dense small natural gas facilities. The R/V Point Sur was instrumented to carry out both remote sensing and in-situ measurements of NO2 and O3 along with in-situ CH4, CO2, CO, and VOC tracers which allowed detailed characterization of airmass type and emissions. In addition, there were also measurements of multi-wavelength AOD and black carbon as well as planetary boundary layer structure and meteorological variables, including surface temperature, humidity, and winds. A ship-based spectrometer instrument provided remotely-sensed total column amounts of NO2 and O3 for direct comparison with satellite measurements. Ozonesondes and radiosondes were also launched 1-3 times daily from the R/V Point Sur to provide O3 and meteorological vertical profile observations. The ground-based observations, primarily at LUMCON, included spectrometer-measured column NO2 and O3, in-situ NO2, VOCs, and planetary boundary layer structure. A NO2sonde was also mounted on a vehicle with the goal to detect pollution onshore from offshore ONG activities during onshore flow; data were collected along coastal Louisiana from Burns Point Park to Grand Isle to the tip of the Mississippi River delta. The in-situ measurements were reported in ICARTT files or Excel files. The remote sensing data are in either HDF or netCDF files.

STAQS_Ground_Data is the ground site data collected during the Synergistic TEMPO Air Quality Science (STAQS) mission. Data collection for this product is complete. Launched in April 2023, NASA’s Tropospheric Emissions: Monitoring of Pollution (TEMPO) satellite monitors major air pollutants across North America every daylight hour at high spatial resolution at a geostationary orbit (GEO). With these measurements, NASA’s STAQS mission seeks to integrate TEMPO satellite observations with traditional air quality monitoring to improve understanding of air quality science and enhance societal benefit. STAQS is being conducted during summer 2023, targeting urban areas, including Los Angeles, New York City, and Chicago. As part of the mission two aircraft will be outfitted with various remote sensing payloads. The Johnson Space Center (JSC) Gulfstream-V (G-V) aircraft will feature the GeoCAPE Airborne Simulator (GCAS) and combined High Spectral Resolution Lidar-2 (HSRL-2) and Ozone Differential Absorption Lidar (DIAL). This payload provides repeated high-resolution mapping of NO2, HCHO, ozone, and aerosols up to 3x per day over targeted cities. NASA Langley Research Center’s (LaRC’s) Gulfstream-III will measure city-scale emissions 2x per day over the targeted cities with the High-Altitude Lidar Observatory (HALO) and Airborne Visible InfraRed Imaging Spectrometer – Next Generation (AVIRS-NG). STAQS will also incorporate ground-based tropospheric ozone profiles from the NASA Tropospheric Ozone Lidar Network (TOLNet), NO2, HCHO, and ozone measurements from Pandora spectrometers, and will leverage existing networks operated by the EPA and state air quality agencies. The primary goal of STAQS is to improve our current understanding of air quality science under the TEMPO field of regard. Further goals include evaluating TEMPO level 2 data products, interpreting the temporal and spatial evolution of air quality events tracked by TEMPO, improving temporal estimates of anthropogenic, biogenic, and greenhouse gas emissions, assessing the benefit of assimilating TEMPO data into chemical transport models, and linking air quality patterns to socio-demographic data.

STRAT_Ground_Data is the ground site data collected during the Stratospheric Tracers of Atmospheric Transport (STRAT) campaign. Data from the JPL ozone lidar at Mauna Loa and Table Mountain, the Composition and Photo-Dissociative Flux Measurement (CPFM), and the Airborne Raman Ozone, Temperature, and Aerosol Lidar (AROTAL) are featured in this collection. Data collection for this product is complete. The STRAT campaign was a field campaign conducted by NASA from May 1995 to February 1996. The primary goal of STRAT was to collect measurements of the change of long-lived tracers and functions of altitude, latitude, and season. These measurements were taken to aid with determining rates for global-scale transport and future distributions of high-speed civil transport (HSCT) exhaust that was emitted into the lower atmosphere. STRAT had four main objectives: defining the rate of transport of trace gases from the stratosphere and troposphere (i.e., HSCT exhaust emissions), improving the understanding of dynamical coupling rates for transport of trace gases between tropical regions and higher latitudes and lower altitudes (between tropical regions, higher latitudes, and lower altitudes are where most ozone resides), improving understanding of chemistry in the upper troposphere and lower stratosphere, and finally, providing data sets for testing two-dimensional and three-dimensional models used in assessments of impacts from stratospheric aviation. To accomplish these objectives, the STRAT Science Team conducted various surface-based remote sensing and in-situ measurements. NASA flew the ER-2 aircraft along with balloons such as ozonesondes and radiosondes just below the tropopause in the Northern Hemisphere to collect data. Along with the ER-2 and balloons, NASA also utilized satellite imagery, theoretical models, and ground sites. The ER-2 collected data on HOx, NOy, CO2, ozone, water vapor, and temperature. The ER-2 also collected in-situ stratospheric measurements of N2O, CH4, CO, HCL, and NO using the Aircraft Laser Infrared Absorption Spectrometer (ALIAS). Ozonesondes and radiosondes were also deployed to collect data on CO2, NO/NOy, air temperature, pressure, and 3D wind. These balloons also took in-situ measurements of N2O, CFC-11, CH4, CO, HCL, and NO2 using the ALIAS. Ground stations were responsible for taking measurements of O3, ozone mixing ratio, pressure, and temperature. Satellites took infrared images of the atmosphere with the goal of aiding in completing STRAT objectives. Pressure and temperature models were created to help plan the mission.

SCOAPE_Pandora_Data is the column NO2 and ozone data collected by Pandora spectrometers during the Satellite Coastal and Oceanic Atmospheric Pollution Experiment (SCOAPE). Pandora instruments were located on the University of Southern Mississippi’s Research Vessel (R/V) Point Sur and at the Louisiana Universities Marine Consortium (LUMCON; Cocodrie, LA). Data collection for this product is complete. The Outer Continental Shelf Lands Act (OCSLA) requires the US Department of Interior Bureau of Ocean Energy Management (BOEM) to ensure compliance with the US National Ambient Air Quality Standard (NAAQS) so that Outer Continental Shelf (OCS) oil and natural gas (ONG) exploration, development, and production do not significantly impact the air quality of any US state. In 2017, BOEM and NASA entered into an interagency agreement to begin a study to scope out the feasibility of BOEM personnel using a suite of NASA and non-NASA resources to assess how pollutants from ONG exploration, development, and production activities affect air quality. An important activity of this interagency agreement was SCOAPE, a field deployment that took place in May 2019, that aimed to assess the capability of satellite observations for monitoring offshore air quality. The outcomes of the study are documented in two BOEM reports (Duncan, 2020; Thompson, 2020). To address BOEM’s goals, the SCOAPE science team conducted surface-based remote sensing and in-situ measurements, which enabled a systematic assessment of the application of satellite observations, primarily NO2, for monitoring air quality. The SCOAPE field measurements consisted of onshore ground sites, including in the vicinity of LUMCON, as well as those from University of Southern Mississippi’s R/V Point Sur, which cruised in the Gulf of Mexico from 10-18 May 2019. Based on the 2014 and 2017 BOEM emissions inventories as well as daily air quality and meteorological forecasts, the cruise track was designed to sample both areas with large oil drilling platforms and areas with dense small natural gas facilities. The R/V Point Sur was instrumented to carry out both remote sensing and in-situ measurements of NO2 and O3 along with in-situ CH4, CO2, CO, and VOC tracers which allowed detailed characterization of airmass type and emissions. In addition, there were also measurements of multi-wavelength AOD and black carbon as well as planetary boundary layer structure and meteorological variables, including surface temperature, humidity, and winds. A ship-based spectrometer instrument provided remotely-sensed total column amounts of NO2 and O3 for direct comparison with satellite measurements. Ozonesondes and radiosondes were also launched 1-3 times daily from the R/V Point Sur to provide O3 and meteorological vertical profile observations. The ground-based observations, primarily at LUMCON, included spectrometer-measured column NO2 and O3, in-situ NO2, VOCs, and planetary boundary layer structure. A NO2sonde was also mounted on a vehicle with the goal to detect pollution onshore from offshore ONG activities during onshore flow; data were collected along coastal Louisiana from Burns Point Park to Grand Isle to the tip of the Mississippi River delta. The in-situ measurements were reported in ICARTT files or Excel files. The remote sensing data are in either HDF or netCDF files.

SCOAPE_Ground_Data is the ground site data collected during the Satellite Coastal and Oceanic Atmospheric Pollution Experiment (SCOAPE). The ground site was located at the Louisiana Universities Marine Consortium (LUMCON; Cocodrie, LA). This collection features NO2 volume mixing ratios from the Teledyne API T500U and boundary layer height information from the UH Vaisala CL31 Ceilometer. Data collection for this product is complete.The Outer Continental Shelf Lands Act (OCSLA) requires the US Department of Interior Bureau of Ocean Energy Management (BOEM) to ensure compliance with the US National Ambient Air Quality Standard (NAAQS) so that Outer Continental Shelf (OCS) oil and natural gas (ONG) exploration, development, and production do not significantly impact the air quality of any US state. In 2017, BOEM and NASA entered into an interagency agreement to begin a study to scope out the feasibility of BOEM personnel using a suite of NASA and non-NASA resources to assess how pollutants from ONG exploration, development, and production activities affect air quality. An important activity of this interagency agreement was SCOAPE, a field deployment that took place in May 2019, that aimed to assess the capability of satellite observations for monitoring offshore air quality. The outcomes of the study are documented in two BOEM reports (Duncan, 2020; Thompson, 2020).To address BOEM’s goals, the SCOAPE science team conducted surface-based remote sensing and in-situ measurements, which enabled a systematic assessment of the application of satellite observations, primarily NO2, for monitoring air quality. The SCOAPE field measurements consisted of onshore ground sites, including in the vicinity of LUMCON, as well as those from University of Southern Mississippi’s Research Vessel (R/V) Point Sur, which cruised in the Gulf of America from 10-18 May 2019. Based on the 2014 and 2017 BOEM emissions inventories as well as daily air quality and meteorological forecasts, the cruise track was designed to sample both areas with large oil drilling platforms and areas with dense small natural gas facilities. The R/V Point Sur was instrumented to carry out both remote sensing and in-situ measurements of NO2 and O3 along with in-situ CH4, CO2, CO, and VOC tracers which allowed detailed characterization of airmass type and emissions. In addition, there were also measurements of multi-wavelength AOD and black carbon as well as planetary boundary layer structure and meteorological variables, including surface temperature, humidity, and winds. A ship-based spectrometer instrument provided remotely-sensed total column amounts of NO2 and O3 for direct comparison with satellite measurements. Ozonesondes and radiosondes were also launched 1-3 times daily from the R/V Point Sur to provide O3 and meteorological vertical profile observations. The ground-based observations, primarily at LUMCON, included spectrometer-measured column NO2 and O3, in-situ NO2, VOCs, and planetary boundary layer structure. A NO2sonde was also mounted on a vehicle with the goal to detect pollution onshore from offshore ONG activities during onshore flow; data were collected along coastal Louisiana from Burns Point Park to Grand Isle to the tip of the Mississippi River delta. The in-situ measurements were reported in ICARTT files or Excel files. The remote sensing data are in either HDF or netCDF files.

SCOAPE_Sondes_Data is the NO2-sonde and ozonesonde data collected during the Satellite Coastal and Oceanic Atmospheric Pollution Experiment (SCOAPE). Data were collected by KNMI NO2-sondes and ozonesondes. Data collection for this product is complete. The Outer Continental Shelf Lands Act (OCSLA) requires the US Department of Interior Bureau of Ocean Energy Management (BOEM) to ensure compliance with the US National Ambient Air Quality Standard (NAAQS) so that Outer Continental Shelf (OCS) oil and natural gas (ONG) exploration, development, and production do not significantly impact the air quality of any US state. In 2017, BOEM and NASA entered into an interagency agreement to begin a study to scope out the feasibility of BOEM personnel using a suite of NASA and non-NASA resources to assess how pollutants from ONG exploration, development, and production activities affect air quality. An important activity of this interagency agreement was SCOAPE, a field deployment that took place in May 2019, that aimed to assess the capability of satellite observations for monitoring offshore air quality. The outcomes of the study are documented in two BOEM reports (Duncan, 2020; Thompson, 2020). To address BOEM’s goals, the SCOAPE science team conducted surface-based remote sensing and in-situ measurements, which enabled a systematic assessment of the application of satellite observations, primarily NO2, for monitoring air quality. The SCOAPE field measurements consisted of onshore ground sites, including in the vicinity of the Louisiana Universities Marine Consortium (LUMCON; Cocodrie, LA), as well as those from University of Southern Mississippi’s Research Vessel (R/V) Point Sur, which cruised in the Gulf of Mexico from 10-18 May 2019. Based on the 2014 and 2017 BOEM emissions inventories as well as daily air quality and meteorological forecasts, the cruise track was designed to sample both areas with large oil drilling platforms and areas with dense small natural gas facilities. The R/V Point Sur was instrumented to carry out both remote sensing and in-situ measurements of NO2 and O3 along with in-situ CH4, CO2, CO, and VOC tracers which allowed detailed characterization of airmass type and emissions. In addition, there were also measurements of multi-wavelength AOD and black carbon as well as planetary boundary layer structure and meteorological variables, including surface temperature, humidity, and winds. A ship-based spectrometer instrument provided remotely-sensed total column amounts of NO2 and O3 for direct comparison with satellite measurements. Ozonesondes and radiosondes were also launched 1-3 times daily from the R/V Point Sur to provide O3 and meteorological vertical profile observations. The ground-based observations, primarily at LUMCON, included spectrometer-measured column NO2 and O3, in-situ NO2, VOCs, and planetary boundary layer structure. A NO2sonde was also mounted on a vehicle with the goal to detect pollution onshore from offshore ONG activities during onshore flow; data were collected along coastal Louisiana from Burns Point Park to Grand Isle to the tip of the Mississippi River delta. The in-situ measurements were reported in ICARTT files or Excel files. The remote sensing data are in either HDF or netCDF files.

SCOAPE2_Sondes_Data is the ozonesonde data collected during the Satellite Coastal and Oceanic Atmospheric Pollution Experiment - II (SCOAPE-II). Data collection for this product is complete.The Outer Continental Shelf Lands Act (OCSLA) requires the US Department of Interior Bureau of Ocean Energy Management (BOEM) to ensure compliance with the US National Ambient Air Quality Standard (NAAQS) so that Outer Continental Shelf (OCS) oil and natural gas (ONG) exploration, development, and production do not significantly impact the air quality of any US state. In 2017, BOEM and NASA entered into an interagency agreement to begin a study to scope out the feasibility of BOEM personnel using a suite of NASA and non-NASA resources to assess how pollutants from ONG exploration, development, and production activities affect air quality. An important activity of this interagency agreement was the Satellite Coastal and Oceanic Atmospheric Pollution Experiment (SCOAPE), a field deployment that took place in May 2019, that aimed to assess the capability of satellite observations for monitoring offshore air quality. The outcomes of the study are documented in two BOEM reports (Duncan, 2020; Thompson, 2020).SCOAPE-II was completed in May 2024 as a follow-on to SCOAPE-I. The primary objectives of SCOAPE-II were to collect shipboard in-situ data and learn more about plumes from oil and gas in the Gulf of America; and conduct validation of NO2 columns from the TEMPO instrument and assess the feasibility of using hourly scans for monitoring air quality. SCOAPE-II also introduced an aircraft component to support comparisons with in-situ and satellite observations. Flights with the AVIRIS-3 instrument were conducted during the primary campaign period, targeting methane column enhancements. A separate flight period occurred in October 2024 to conduct observations of NO2 plumes at deep water targets utilizing the Geostationary Coastal and Air Pollution Event (GEO-CAPE) Airborne Simulator (GCAS) instrument.To address BOEM’s goals, the SCOAPE science team conducted surface-based remote sensing and in-situ measurements, which enabled a systematic assessment of the application of satellite observations, primarily NO2, for monitoring air quality. The SCOAPE field measurements consisted of onshore ground sites, including in the vicinity of the Louisiana Universities Marine Consortium (LUMCON; Cocodrie, LA), as well as those from University of Southern Mississippi’s Research Vessel (R/V) Point Sur, which cruised in the Gulf of America from 10-18 May 2019. Based on the 2014 and 2017 BOEM emissions inventories as well as daily air quality and meteorological forecasts, the cruise track was designed to sample both areas with large oil drilling platforms and areas with dense small natural gas facilities. The R/V Point Sur was instrumented to carry out both remote sensing and in-situ measurements of NO2 and O3 along with in-situ CH4, CO2, CO, and VOC tracers which allowed detailed characterization of airmass type and emissions. In addition, there were also measurements of multi-wavelength AOD and black carbon as well as planetary boundary layer structure and meteorological variables, including surface temperature, humidity, and winds. A ship-based spectrometer instrument provided remotely-sensed total column amounts of NO2 and O3 for direct comparison with satellite measurements. Ozonesondes and radiosondes were also launched 1-3 times daily from the R/V Point Sur to provide O3 and meteorological vertical profile observations. The ground-based observations, primarily at LUMCON, included spectrometer-measured column NO2 and O3, in-situ NO2, VOCs, and planetary boundary layer structure. A NO2sonde was also mounted on a vehicle with the goal to detect pollution onshore from offshore ONG activities during onshore flow; data were collected along coastal Louisiana from Burns Point Park to Grand Isle to the tip of the Mississippi River delta. The in-situ measurements were

STAQS_SeaRey_Data is the data collected onboard the Progressive Aerodyne SeaRey aircraft during the Synergistic TEMPO Air Quality Science (STAQS) mission. Data collection for this product is complete. Launched in April 2023, NASA’s Tropospheric Emissions: Monitoring of Pollution (TEMPO) satellite monitors major air pollutants across North America every daylight hour at high spatial resolution at a geostationary orbit (GEO). With these measurements, NASA’s STAQS mission seeks to integrate TEMPO satellite observations with traditional air quality monitoring to improve understanding of air quality science and enhance societal benefit. STAQS is being conducted during summer 2023, targeting urban areas, including Los Angeles, New York City, and Chicago. As part of the mission two aircraft will be outfitted with various remote sensing payloads. The Johnson Space Center (JSC) Gulfstream-V (G-V) aircraft will feature the GeoCAPE Airborne Simulator (GCAS) and combined High Spectral Resolution Lidar-2 (HSRL-2) and Ozone Differential Absorption Lidar (DIAL). This payload provides repeated high-resolution mapping of NO2, HCHO, ozone, and aerosols up to 3x per day over targeted cities. NASA Langley Research Center’s (LaRC’s) Gulfstream-III will measure city-scale emissions 2x per day over the targeted cities with the High-Altitude Lidar Observatory (HALO) and Airborne Visible InfraRed Imaging Spectrometer – Next Generation (AVIRS-NG). STAQS will also incorporate ground-based tropospheric ozone profiles from the NASA Tropospheric Ozone Lidar Network (TOLNet), NO2, HCHO, and ozone measurements from Pandora spectrometers, and will leverage existing networks operated by the EPA and state air quality agencies. The primary goal of STAQS is to improve our current understanding of air quality science under the TEMPO field of regard. Further goals include evaluating TEMPO level 2 data products, interpreting the temporal and spatial evolution of air quality events tracked by TEMPO, improving temporal estimates of anthropogenic, biogenic, and greenhouse gas emissions, assessing the benefit of assimilating TEMPO data into chemical transport models, and linking air quality patterns to socio-demographic data.

LMOS_Ground_SchillerPark_Data_1 is the Lake Michigan Ozone Study (LMOS) data collected at the Schiller Park ground site during the LMOS field campaign. This product is a result of a joint effort across multiple agencies, including NASA, NOAA, the EPA, Electric Power Research Institute (EPRI), National Science Foundation (NSF), Lake Michigan Air Directors Consortium (LADCO) and its member states, and several research groups at universities. Data collection is complete. Elevated spring and summertime ozone levels remain a challenge along the coast of Lake Michigan, with a number of monitors recording levels/amounts exceeding the 2015 National Ambient Air Quality Standards (NAAQS) for ozone. The production of ozone over Lake Michigan, combined with onshore daytime “lake breeze” airflow is believed to increase ozone concentrations at locations within a few kilometers off shore. This observed lake-shore gradient motivated the Lake Michigan Ozone Study (LMOS). Conducted from May through June 2017, the goal of LMOS was to better understand ozone formation and transport around Lake Michigan; in particular, why ozone concentrations are generally highest along the lakeshore and drop off sharply inland and why ozone concentrations peak in rural areas far from major emission sources. LMOS was a collaborative, multi-agency field study that provided extensive observational air quality and meteorology datasets through a combination of airborne, ship, mobile laboratories, and fixed ground-based observational platforms. Chemical transport models (CTMs) and meteorological forecast tools assisted in planning for day-to-day measurement strategies. The long term goals of the LMOS field study were to improve modeled ozone forecasts for this region, better understand ozone formation and transport around Lake Michigan, provide a better understanding of the lakeshore gradient in ozone concentrations (which could influence how the Environmental Protection Agency (EPA) addresses future regional ozone issues), and provide improved knowledge of how emissions influence ozone formation in the region.

SCOAPE2_RVPointSur_Data is the data collected from instruments onboard the University of Southern Mississippi’s Research Vessel (R/V) Point Sur during the Satellite Coastal and Oceanic Atmospheric Pollution Experiment - II (SCOAPE-II). Data was collected by sun photometers, ceilometers, aethalometers, anemometers, and pyranometers. Data collection for this product is complete.The Outer Continental Shelf Lands Act (OCSLA) requires the US Department of Interior Bureau of Ocean Energy Management (BOEM) to ensure compliance with the US National Ambient Air Quality Standard (NAAQS) so that Outer Continental Shelf (OCS) oil and natural gas (ONG) exploration, development, and production do not significantly impact the air quality of any US state. In 2017, BOEM and NASA entered into an interagency agreement to begin a study to scope out the feasibility of BOEM personnel using a suite of NASA and non-NASA resources to assess how pollutants from ONG exploration, development, and production activities affect air quality. An important activity of this interagency agreement was the Satellite Coastal and Oceanic Atmospheric Pollution Experiment (SCOAPE), a field deployment that took place in May 2019, that aimed to assess the capability of satellite observations for monitoring offshore air quality. The outcomes of the study are documented in two BOEM reports (Duncan, 2020; Thompson, 2020).SCOAPE-II was completed in May 2024 as a follow-on to SCOAPE-I. The primary objectives of SCOAPE-II were to collect shipboard in-situ data and learn more about plumes from oil and gas in the Gulf of America; and conduct validation of NO2 columns from the TEMPO instrument and assess the feasibility of using hourly scans for monitoring air quality. SCOAPE-II also introduced an aircraft component to support comparisons with in-situ and satellite observations. Flights with the AVIRIS-3 instrument were conducted during the primary campaign period, targeting methane column enhancements. A separate flight period occurred in October 2024 to conduct observations of NO2 plumes at deep water targets utilizing the Geostationary Coastal and Air Pollution Event (GEO-CAPE) Airborne Simulator (GCAS) instrument.To address BOEM’s goals, the SCOAPE science team conducted surface-based remote sensing and in-situ measurements, which enabled a systematic assessment of the application of satellite observations, primarily NO2, for monitoring air quality. The SCOAPE field measurements consisted of onshore ground sites, including in the vicinity of the Louisiana Universities Marine Consortium (LUMCON; Cocodrie, LA), as well as those from University of Southern Mississippi’s Research Vessel (R/V) Point Sur, which cruised in the Gulf of America from 10-18 May 2019. Based on the 2014 and 2017 BOEM emissions inventories as well as daily air quality and meteorological forecasts, the cruise track was designed to sample both areas with large oil drilling platforms and areas with dense small natural gas facilities. The R/V Point Sur was instrumented to carry out both remote sensing and in-situ measurements of NO2 and O3 along with in-situ CH4, CO2, CO, and VOC tracers which allowed detailed characterization of airmass type and emissions. In addition, there were also measurements of multi-wavelength AOD and black carbon as well as planetary boundary layer structure and meteorological variables, including surface temperature, humidity, and winds. A ship-based spectrometer instrument provided remotely-sensed total column amounts of NO2 and O3 for direct comparison with satellite measurements. Ozonesondes and radiosondes were also launched 1-3 times daily from the R/V Point Sur to provide O3 and meteorological vertical profile observations. The ground-based observations, primarily at LUMCON, included spectrometer-measured column NO2 and O3, in-situ NO2, VOCs, and planetary boundary layer structure. A NO2sonde was also mounted on a vehicle with the goal to detect pollution onshore from offshore