TOLNet_LaRC_Data is the lidar data collected by the Langley Mobile Ozone Lidar (LMOL) at NASA Langley Research Center (LaRC) as part of the Tropospheric Ozone Lidar Network (TOLNet). Data collection for this product is ongoing.In the troposphere, ozone is considered a pollutant and is important to understand due to its harmful effects on human health and vegetation. Tropospheric ozone is also significant for its impact on climate as a greenhouse gas. Operating since 2011, TOLNet is an interagency collaboration between NASA, NOAA, and the EPA designed to perform studies of air quality and atmospheric modeling as well as validation and interpretation of satellite observations. TOLNet is currently comprised of seven Differential Absorption Lidars (DIAL). Each of the lidars are unique, and some have had a long history of ozone observations prior to joining the network. Five lidars are mobile systems that can be deployed at remote locations to support field campaigns. This includes the Langley Mobile Ozone Lidar (LMOL) at NASA Langley Research Center (LaRC), the Tropospheric Ozone (TROPOZ) lidar at the Goddard Space Flight Center (GSFC), the Tunable Optical Profile for Aerosol and oZone (TOPAZ) lidar at the NOAA Chemical Sciences Laboratory (CSL) in Boulder, Colorado, the Autonomous Mobile Ozone LIDAR instrument for Tropospheric Experiments (AMOLITE) lidar at Environment and Climate Change Canada (ECCC) in Toronto, Canada, and the Rocket-city O3 Quality Evaluation in the Troposphere (RO3QET) lidar at the University of Alabama in Huntsville, Alabama. The remaining lidars, the Table Mountain Facility (TMF) tropospheric ozone lidar system located at the NASA Jet Propulsion Laboratory (JPL), and City College of New York (CCNY) New York Tropospheric Ozone Lidar System (NYTOLS) are fixed systems.TOLNet seeks to address three science objectives. The primary objective of the network is to provide high spatio-temporal measurements of ozone from near the surface to the top of the troposphere. Detailed observations of ozone structure allow science teams and the modeling community to better understand ozone in the lower-atmosphere and to assess the accuracy and vertical resolution with which geosynchronous instruments could retrieve the observed laminar ozone structures. Another objective of TOLNet is to identify an ozone lidar instrument design that would be suitable to address the needs of NASA, NOAA, and EPA air quality scientists who express a desire for these ozone profiles. The third objective of TOLNET is to perform basic scientific research into the processes create and destroy the ubiquitously observed ozone laminae and other ozone features in the troposphere. To help fulfill these objectives, lidars that are a part of TOLNet have been deployed to support nearly ten campaigns thus far. This includes campaigns such as the Deriving Information on Surface conditions from Column and Vertically Resolved Observations Relevant to Air Quality (DISCOVER-AQ) mission, the Korea United States Air Quality Study (KORUS-AQ), the Tracking Aerosol Convection ExpeRiment – Air Quality (TRACER-AQ) campaign, the Front Range Air Pollution and Photochemistry Éxperiment (FRAPPÉ), the Long Island Sound Tropospheric Ozone Study (LISTOS), and the Ozone Water–Land Environmental Transition Study (OWLETS).

TOLNet_UAH_Data is the lidar data collected by the Rocket-city O3 Quality Evaluation in the Troposphere (RO3QET) lidar at the University of Alabama in Huntsville, Alabama as part of the Tropospheric Ozone Lidar Network (TOLNet). Data collection for this product is ongoing.In the troposphere, ozone is considered a pollutant and is important to understand due to its harmful effects on human health and vegetation. Tropospheric ozone is also significant for its impact on climate as a greenhouse gas. Operating since 2011, TOLNet is an interagency collaboration between NASA, NOAA, and the EPA designed to perform studies of air quality and atmospheric modeling as well as validation and interpretation of satellite observations. TOLNet is currently comprised of seven Differential Absorption Lidars (DIAL). Each of the lidars are unique, and some have had a long history of ozone observations prior to joining the network. Five lidars are mobile systems that can be deployed at remote locations to support field campaigns. This includes the Langley Mobile Ozone Lidar (LMOL) at NASA Langley Research Center (LaRC), the Tropospheric Ozone (TROPOZ) lidar at the Goddard Space Flight Center (GSFC), the Tunable Optical Profile for Aerosol and oZone (TOPAZ) lidar at the NOAA Chemical Sciences Laboratory (CSL) in Boulder, Colorado, the Autonomous Mobile Ozone LIDAR instrument for Tropospheric Experiments (AMOLITE) lidar at Environment and Climate Change Canada (ECCC) in Toronto, Canada, and the Rocket-city O3 Quality Evaluation in the Troposphere (RO3QET) lidar at the University of Alabama in Huntsville, Alabama. The remaining lidars, the Table Mountain Facility (TMF) tropospheric ozone lidar system located at the NASA Jet Propulsion Laboratory (JPL), and City College of New York (CCNY) New York Tropospheric Ozone Lidar System (NYTOLS) are fixed systems.TOLNet seeks to address three science objectives. The primary objective of the network is to provide high spatio-temporal measurements of ozone from near the surface to the top of the troposphere. Detailed observations of ozone structure allow science teams and the modeling community to better understand ozone in the lower-atmosphere and to assess the accuracy and vertical resolution with which geosynchronous instruments could retrieve the observed laminar ozone structures. Another objective of TOLNet is to identify an ozone lidar instrument design that would be suitable to address the needs of NASA, NOAA, and EPA air quality scientists who express a desire for these ozone profiles. The third objective of TOLNET is to perform basic scientific research into the processes create and destroy the ubiquitously observed ozone laminae and other ozone features in the troposphere. To help fulfill these objectives, lidars that are a part of TOLNet have been deployed to support nearly ten campaigns thus far. This includes campaigns such as the Deriving Information on Surface conditions from Column and Vertically Resolved Observations Relevant to Air Quality (DISCOVER-AQ) mission, the Korea United States Air Quality Study (KORUS-AQ), the Tracking Aerosol Convection ExpeRiment – Air Quality (TRACER-AQ) campaign, the Front Range Air Pollution and Photochemistry Éxperiment (FRAPPÉ), the Long Island Sound Tropospheric Ozone Study (LISTOS), and the Ozone Water–Land Environmental Transition Study (OWLETS).

TOLNet_CSL_Data is the lidar data collected by the Tunable Optical Profile for Aerosol and oZone (TOPAZ) lidar at the NOAA Chemical Sciences Laboratory (CSL) in Boulder, Colorado as part of the Tropospheric Ozone Lidar Network (TOLNet). Data collection for this product is ongoing.In the troposphere, ozone is considered a pollutant and is important to understand due to its harmful effects on human health and vegetation. Tropospheric ozone is also significant for its impact on climate as a greenhouse gas. Operating since 2011, TOLNet is an interagency collaboration between NASA, NOAA, and the EPA designed to perform studies of air quality and atmospheric modeling as well as validation and interpretation of satellite observations. TOLNet is currently comprised of seven Differential Absorption Lidars (DIAL). Each of the lidars are unique, and some have had a long history of ozone observations prior to joining the network. Five lidars are mobile systems that can be deployed at remote locations to support field campaigns. This includes the Langley Mobile Ozone Lidar (LMOL) at NASA Langley Research Center (LaRC), the Tropospheric Ozone (TROPOZ) lidar at the Goddard Space Flight Center (GSFC), the Tunable Optical Profile for Aerosol and oZone (TOPAZ) lidar at the NOAA Chemical Sciences Laboratory (CSL) in Boulder, Colorado, the Autonomous Mobile Ozone LIDAR instrument for Tropospheric Experiments (AMOLITE) lidar at Environment and Climate Change Canada (ECCC) in Toronto, Canada, and the Rocket-city O3 Quality Evaluation in the Troposphere (RO3QET) lidar at the University of Alabama in Huntsville, Alabama. The remaining lidars, the Table Mountain Facility (TMF) tropospheric ozone lidar system located at the NASA Jet Propulsion Laboratory (JPL), and City College of New York (CCNY) New York Tropospheric Ozone Lidar System (NYTOLS) are fixed systems.TOLNet seeks to address three science objectives. The primary objective of the network is to provide high spatio-temporal measurements of ozone from near the surface to the top of the troposphere. Detailed observations of ozone structure allow science teams and the modeling community to better understand ozone in the lower-atmosphere and to assess the accuracy and vertical resolution with which geosynchronous instruments could retrieve the observed laminar ozone structures. Another objective of TOLNet is to identify an ozone lidar instrument design that would be suitable to address the needs of NASA, NOAA, and EPA air quality scientists who express a desire for these ozone profiles. The third objective of TOLNET is to perform basic scientific research into the processes create and destroy the ubiquitously observed ozone laminae and other ozone features in the troposphere. To help fulfill these objectives, lidars that are a part of TOLNet have been deployed to support nearly ten campaigns thus far. This includes campaigns such as the Deriving Information on Surface conditions from Column and Vertically Resolved Observations Relevant to Air Quality (DISCOVER-AQ) mission, the Korea United States Air Quality Study (KORUS-AQ), the Tracking Aerosol Convection ExpeRiment – Air Quality (TRACER-AQ) campaign, the Front Range Air Pollution and Photochemistry Éxperiment (FRAPPÉ), the Long Island Sound Tropospheric Ozone Study (LISTOS), and the Ozone Water–Land Environmental Transition Study (OWLETS).

TOLNet_GSFC_Data is the lidar data collected by the Tropospheric Ozone (TROPOZ) lidar at the Goddard Space Flight Center (GSFC) as part of the Tropospheric Ozone Lidar Network (TOLNet). Data collection for this product is ongoing.In the troposphere, ozone is considered a pollutant and is important to understand due to its harmful effects on human health and vegetation. Tropospheric ozone is also significant for its impact on climate as a greenhouse gas. Operating since 2011, TOLNet is an interagency collaboration between NASA, NOAA, and the EPA designed to perform studies of air quality and atmospheric modeling as well as validation and interpretation of satellite observations. TOLNet is currently comprised of seven Differential Absorption Lidars (DIAL). Each of the lidars are unique, and some have had a long history of ozone observations prior to joining the network. Five lidars are mobile systems that can be deployed at remote locations to support field campaigns. This includes the Langley Mobile Ozone Lidar (LMOL) at NASA Langley Research Center (LaRC), the Tropospheric Ozone (TROPOZ) lidar at the Goddard Space Flight Center (GSFC), the Tunable Optical Profile for Aerosol and oZone (TOPAZ) lidar at the NOAA Chemical Sciences Laboratory (CSL) in Boulder, Colorado, the Autonomous Mobile Ozone LIDAR instrument for Tropospheric Experiments (AMOLITE) lidar at Environment and Climate Change Canada (ECCC) in Toronto, Canada, and the Rocket-city O3 Quality Evaluation in the Troposphere (RO3QET) lidar at the University of Alabama in Huntsville, Alabama. The remaining lidars, the Table Mountain Facility (TMF) tropospheric ozone lidar system located at the NASA Jet Propulsion Laboratory (JPL), and City College of New York (CCNY) New York Tropospheric Ozone Lidar System (NYTOLS) are fixed systems.TOLNet seeks to address three science objectives. The primary objective of the network is to provide high spatio-temporal measurements of ozone from near the surface to the top of the troposphere. Detailed observations of ozone structure allow science teams and the modeling community to better understand ozone in the lower-atmosphere and to assess the accuracy and vertical resolution with which geosynchronous instruments could retrieve the observed laminar ozone structures. Another objective of TOLNet is to identify an ozone lidar instrument design that would be suitable to address the needs of NASA, NOAA, and EPA air quality scientists who express a desire for these ozone profiles. The third objective of TOLNET is to perform basic scientific research into the processes create and destroy the ubiquitously observed ozone laminae and other ozone features in the troposphere. To help fulfill these objectives, lidars that are a part of TOLNet have been deployed to support nearly ten campaigns thus far. This includes campaigns such as the Deriving Information on Surface conditions from Column and Vertically Resolved Observations Relevant to Air Quality (DISCOVER-AQ) mission, the Korea United States Air Quality Study (KORUS-AQ), the Tracking Aerosol Convection ExpeRiment – Air Quality (TRACER-AQ) campaign, the Front Range Air Pollution and Photochemistry Éxperiment (FRAPPÉ), the Long Island Sound Tropospheric Ozone Study (LISTOS), and the Ozone Water–Land Environmental Transition Study (OWLETS).

LISTOS_Ground_BronxPfizer_Data is the Long Island Sound Tropospheric Ozone Study (LISTOS) ground site data collected at the Bronx Pfizer ground site during the LISTOS field campaign. This product is a result of a joint effort across multiple agencies, including NASA, NOAA, the EPA Northeast States for Coordinated Air Use Management (NESCAUM), Maine Department of Environmental Protection, New Jersey Department of Environmental Protection, New York State Department of Environmental Conservation and several research groups at universities. Data collection is complete.The New York City (NYC) metropolitan area (comprised of portions of New Jersey, New York, and Connecticut in and around NYC) is home to over 20 million people, but also millions of people living downwind in neighboring states. This area continues to persistently have challenges meeting past and recently revised federal health-based air quality standards for ground-level ozone, which impacts the health and well-being of residents living in the area. A unique feature of this chronic ozone problem is the pollution transported in a northeast direction out of NYC over Long Island Sound. The relatively cool waters of Long Island Sound confine the pollutants in a shallow and stable marine boundary layer. Afternoon heating over coastal land creates a sea breeze that carries the air pollution inland from the confined marine layer, resulting in high ozone concentrations in Connecticut and, at times, farther east into Rhode Island and Massachusetts. To investigate the evolving nature of ozone formation and transport in the NYC region and downwind, Northeast States for Coordinated Air Use Management (NESCAUM) launched the Long Island Sound Tropospheric Ozone Study (LISTOS). LISTOS was a multi-agency collaborative study focusing on Long Island Sound and the surrounding coastlines that continually suffer from poor air quality exacerbated by land/water circulation. The primary measurement observations took place between June-September 2018 and include in-situ and remote sensing instrumentation that were integrated aboard three aircraft, a network of ground sites, mobile vehicles, boat measurements, and ozonesondes. The goal of LISTOS was to improve the understanding of ozone chemistry and sea breeze transported pollution over Long Island Sound and its coastlines. LISTOS also provided NASA the opportunity to test air quality remote sensing retrievals with the use of its airborne simulators (GEOstationary Coastal and Air Pollution Events (GEO-CAPE) Airborne Simulator (GCAS), and Geostationary Trace gas and Aerosol Sensory Optimization (GeoTASO)) for the preparation of the Tropospheric Emissions; Monitoring of Pollution (TEMPO) observations for monitoring air quality from space. LISTOS also helped collaborators in the validation of Tropospheric Monitoring Instrument (TROPOMI) science products, with use of airborne- and ground-based measurements of ozone, NO2, and HCHO.

LISTOS_Ground_Westport_Data is the Long Island Sound Tropospheric Ozone Study (LISTOS) Wesport ground site data collected during the LISTOS field campaign. This product is a result of a joint effort across multiple agencies, including NASA, NOAA, the EPA Northeast States for Coordinated Air Use Management (NESCAUM), Maine Department of Environmental Protection, New Jersey Department of Environmental Protection, New York State Department of Environmental Conservation and several research groups at universities. Data collection is complete.The New York City (NYC) metropolitan area (comprised of portions of New Jersey, New York, and Connecticut in and around NYC) is home to over 20 million people, but also millions of people living downwind in neighboring states. This area continues to persistently have challenges meeting past and recently revised federal health-based air quality standards for ground-level ozone, which impacts the health and well-being of residents living in the area. A unique feature of this chronic ozone problem is the pollution transported in a northeast direction out of NYC over Long Island Sound. The relatively cool waters of Long Island Sound confine the pollutants in a shallow and stable marine boundary layer. Afternoon heating over coastal land creates a sea breeze that carries the air pollution inland from the confined marine layer, resulting in high ozone concentrations in Connecticut and, at times, farther east into Rhode Island and Massachusetts. To investigate the evolving nature of ozone formation and transport in the NYC region and downwind, Northeast States for Coordinated Air Use Management (NESCAUM) launched the Long Island Sound Tropospheric Ozone Study (LISTOS). LISTOS was a multi-agency collaborative study focusing on Long Island Sound and the surrounding coastlines that continually suffer from poor air quality exacerbated by land/water circulation. The primary measurement observations took place between June-September 2018 and include in-situ and remote sensing instrumentation that were integrated aboard three aircraft, a network of ground sites, mobile vehicles, boat measurements, and ozonesondes. The goal of LISTOS was to improve the understanding of ozone chemistry and sea breeze transported pollution over Long Island Sound and its coastlines. LISTOS also provided NASA the opportunity to test air quality remote sensing retrievals with the use of its airborne simulators (GEOstationary Coastal and Air Pollution Events (GEO-CAPE) Airborne Simulator (GCAS), and Geostationary Trace gas and Aerosol Sensory Optimization (GeoTASO)) for the preparation of the Tropospheric Emissions; Monitoring of Pollution (TEMPO) observations for monitoring air quality from space. LISTOS also helped collaborators in the validation of Tropospheric Monitoring Instrument (TROPOMI) science products, with use of airborne- and ground-based measurements of ozone, NO2, and HCHO.

LMOS_TraceGas_SurfaceMobile_UWEC-Auto_Data_1 is the Lake Michigan Ozone Study (LMOS) trace gas surface mobile data collected onboard the University of Wisconsin-Eau Claire (UWEC) surface mobile platform during the LMOS field campaign. This product is a result of a joint effort across multiple agencies, including NASA, NOAA, the EPA, Electric Power Research Institute (EPRI), National Science Foundation (NSF), Lake Michigan Air Directors Consortium (LADCO) and its member states, and several research groups at universities. Data collection for this product is complete.Elevated spring and summertime ozone levels remain a challenge along the coast of Lake Michigan, with a number of monitors recording levels/amounts exceeding the 2015 National Ambient Air Quality Standards (NAAQS) for ozone. The production of ozone over Lake Michigan, combined with onshore daytime “lake breeze” airflow is believed to increase ozone concentrations at locations within a few kilometers off shore. This observed lake-shore gradient motivated the Lake Michigan Ozone Study (LMOS). Conducted from May through June 2017, the goal of LMOS was to better understand ozone formation and transport around Lake Michigan; in particular, why ozone concentrations are generally highest along the lakeshore and drop off sharply inland and why ozone concentrations peak in rural areas far from major emission sources. LMOS was a collaborative, multi-agency field study that provided extensive observational air quality and meteorology datasets through a combination of airborne, ship, mobile laboratories, and fixed ground-based observational platforms. Chemical transport models (CTMs) and meteorological forecast tools assisted in planning for day-to-day measurement strategies. The long term goals of the LMOS field study were to improve modeled ozone forecasts for this region, better understand ozone formation and transport around Lake Michigan, provide a better understanding of the lakeshore gradient in ozone concentrations (which could influence how the Environmental Protection Agency (EPA) addresses future regional ozone issues), and provide improved knowledge of how emissions influence ozone formation in the region.

TL2O3N_8 is the Tropospheric Emission Spectrometer (TES)/Aura Level 2 Ozone Nadir Version 8 data product. It consists of information for one molecular species for an entire Global Survey or Special Observation. TES was an instrument aboard NASA's Aura satellite and was launched from California on July 15, 2004. Data collection for TES is complete. TES Level 2 data contain retrieved species (or temperature) profiles at the TES was an instrument aboard NASA's Aura satellite and was launched from California on July 15, 2004. Data collection for TES is complete. TES Level 2 data contain retrieved species (or temperature) profiles at the observation targets and the estimated errors. The geolocation, quality, and other data (e.g., surface characteristics for nadir observations) were also provided. L2 modeled spectra were evaluated using radiative transfer modeling algorithms. The process, referred to as retrieval, compared observed spectra to the modeled spectra and iteratively updated the atmospheric parameters. L2 standard product files included information for one molecular species (or temperature) for an entire global survey or special observation run. A global survey consisted of a maximum of 16 consecutive orbits.Nadir observations, which point directly to the surface of the Earth, are different from limb observations, which are pointed at various off-nadir angles into the atmosphere. Nadir and limb observations were added to separate L2 files, and a single ancillary file was composed of data that are common to both nadir and limb files. A Nadir sequence within the TES Global Survey was a fixed number of observations within an orbit for a Global Survey. Prior to April 24, 2005, it consisted of two low resolution scans over the same ground locations. After April 24, 2005, Global Survey data consisted of three low resolution scans. The Nadir standard product consists of four files, where each file is composed of the Global Survey Nadir observations from one of four focal planes for a single orbit, i.e. 72 orbit sequences. The Global Survey Nadir observations only used a single set of filter mix. A Global Survey consisted of observations along 16 consecutive orbits at the start of a two day cycle, over which 3,200 retrievals were performed. Each observation was the input for retrievals of species Volume Mixing Ratios (VMRs), temperature profiles, surface temperature, and other data parameters with associated pressure levels, precision, total error, vertical resolution, total column density, and other diagnostic quantities. Each TES Level 2 standard product reported information in a swath format conforming to the HDF-EOS Aura File Format Guidelines. Each Swath object was bounded by the number of observations in a global survey and a predefined set of pressure levels, representing slices through the atmosphere. Each standard product could have had a variable number of observations depending upon the Global Survey configuration and whether averaging was employed. Also, missing or bad retrievals were not reported. Further, observations were occasionally scheduled on non-global survey days. In general they were measurements made for validation purposes or with highly focused science objectives. Those non-global survey measurements were referred to as “special observations.”A Limb sequence within the TES Global Survey was three high-resolution scans over the same limb locations. The Limb standard product consists of four files, where each file is composed of the Global Survey Limb observations from one of four focal planes for a single orbit, i.e. 72 orbit sequences. The Global Survey Limb observations used a repeating sequence of filter wheel positions. Special Observations could only be scheduled during the 9 or 10 orbit gaps in the Global Surveys, and were conducted in any of three basic modes: stare, transect, step-and-stare. The mode used depended on the science requirement. Each limb observation Limb 1, Limb 2 and Limb 3, were