This part of DS 781 presents data for the depth-to-transition map of the Bolinas to Pescadero, California, region. The raster data file is included in "TransgressiveContours_BolinasToPescadero.zip," which is accessible from https://pubs.usgs.gov/ds/781/BolinasToPescadero/data_catalog_BolinasToPescadero.html. As part of the USGS's California State Waters Mapping Project, a 50-m grid of sediment thickness for the seafloor within the 3-nautical mile limit between Bolinas and Pescadero was generated from seismic-reflection data collected between 2006 and 2010, supplemented with outcrop and geologic structure (fault) information following the methodology of Wong (2012). Water depths determined from bathymetry data were added to the sediment thickness data to provide information on the depth to base of the post-LGM unit. This polyline shapefile provides the depth-to-transition contours to accompany the grid layer. Reference Cited: Wong, F. L., Phillips, E.L., Johnson, S.Y., and Sliter, R.W., 2012, Modeling of depth to base of Last Glacial Maximum and seafloor sediment thickness for the California State Waters Map Series, eastern Santa Barbara Channel, California: U.S. Geological Survey Open-File Report 2012-1161, 16 p. (available at https://pubs.usgs.gov/of/2012/1161/)

This part of DS 781 presents data for the depth-to-transition map of the Salt Point to Drakes Bay, California, region. The raster data file is included in "DepthToTransition_SaltPointToDrakesBay.zip," which is accessible from https://pubs.usgs.gov/ds/781/SaltPointToDrakesBay/data_catalog_SaltPointToDrakesBay.html. As part of the USGS's California State Waters Mapping Project, a 20-m grid of depth to the transgressive surface of the last glacial maximum was generated for the areas within the 3-nautical mile limit between Salt Point and Drakes Bay was generated from seismic-reflection data collected in 2009 supplemented with outcrop and geologic structure from DS 781. The resulting grid covers an area of approximately 717 sq km. The depth to the transgressive surface of the Last Glacial Maximum ranges between 4 and 78 meters.

This part of DS 781 presents data for the sediment-thickness map of the Salt Point to Drakes Bay, California, region. The raster data file is included in "SedimentThickness_SaltPointToDrakesBay.zip," which is accessible from https://pubs.usgs.gov/ds/781/SaltPointToDrakesBay/data_catalog_SaltPointToDrakesBay.html. As part of the USGS's California State Waters Mapping Project, a 20-m grid of sediment thickness for the seafloor within the 3-nautical mile limit between Salt Point and Drakes Bay was generated from seismic-reflection data collected in 2009 supplemented with outcrop and geologic structure from DS 781. The resulting grid covers an area of approximately 717 sq km. The volume of sediment accumulated since the Last Glacial Maximum is approximately 6,800 million cubic meters. Contours at 2.5-meter intervals were derived from this grid.

This part of DS 781 presents data for the transgressive contours for the Santa Barbara Channel, California, region. The vector file is included in "TransgressiveContours_SantaBarbaraChannel.zip," which is accessible from https://pubs.usgs.gov/ds/781/SantaBarbaraChannel/data_catalog_SantaBarbaraChannel.html. As part of the USGS's California Seafloor Mapping Project, a 50-m-resolution grid of depth to the transgressive surface of the Last Glacial Maximum within California State Waters between Refugio Beach and the Hueneme Canyon and vicinity map area was generated from seismic-reflection data collected in 2007 and 2008 (USGS activities Z-3-07-SC and S-7-08-SC), supplemented with outcrop and geologic structure data from DS 781. The resulting sediment-thickness grid was subtracted from regional bathymetry to determine the depth to the last glacial maximum transitional surface. The resulting grid covers an area of approximately 600 sq km. Contours at 5-meter intervals were derived from this grid.

This part of DS 781 presents data for the transgressive contours for the depth-to-transition map of the Pigeon Point to Monterey, California, map region. The vector file is included in T "TransgressiveContours_PigeonPointToMonterey.zip," which is accessible from https://doi.org/10.5066/F7N29V0Z. As part of the USGS's California State Waters Mapping Project, a 50-m grid of sediment thickness for the seafloor within the limit of California’s State Waters between Pigeon Point and southern Monterey Bay was generated from seismic-reflection data collected in 2009 and 2010 (USGS activities (S-15-10-NC, S-N1-09-MB, and S-06-11-MB) supplemented with outcrop and geologic structure from DS 781. The resulting grid covers was subtracted from regional bathymetry to determine the depth to the transitional surface. Contours at 5-meter intervals were derived from this grid.

This part of DS 781 presents data for the isopachs for the Salt Point to Drakes Bay, California, region. The vector data file is included in "Isopachs_SaltPointToDrakesBay.zip," which is accessible from https://pubs.usgs.gov/ds/781/SaltPointToDrakesBay/data_catalog_SaltPointToDrakesBay.html. As part of the USGS's California Seafloor Mapping Program, a 20-m grid of sediment thickness for the seafloor within the 3-nautical-mile limit of California's State Waters between Salt Point and Drakes Bay was generated from seismic-reflection data collected in 2009 supplemented with outcrop and geologic structure from sheet DS 781. The resulting grid covers an area of approximately 600 sq km. The volume of sediment accumulated since the Last Glacial Maximum is approximately 9,000 million cubic meters. Contours at 2.5-meter intervals were derived from this grid.

This part of DS 781 presents data for the geologic and geomorphic map of the Offshore of Salt Point map area, California. The vector data file is included in "Geology_OffshoreSaltPoint.zip," which is accessible from https://pubs.usgs.gov/ds/781/OffshoreSaltPoint/data_catalog_OffshoreSaltPoint.html. These data accompany the pamphlet and map sheets of Johnson, S.Y., Dartnell, P., Golden, N.E., Hartwell, S.R., Erdey, M.D., Greene, H.G., Cochrane, G.R., Kvitek, R.G., Manson, M.W., Endris, C.A., Dieter, B.E., Watt, J.T., Krigsman, L.M., Sliter, R.W., Lowe, E.N., and Chin, J.L. (S.Y. Johnson and S.A. Cochran, eds.), 2015, California State Waters Map Series—Offshore of Salt Point, California: U.S. Geological Survey Open-File Report 2015–1098, pamphlet 37 p., 10 sheets, scale 1:24,000, https://doi.org/10.3133/ofr20151098. Marine geology and geomorphology was mapped in the Offshore of Salt Point map area, California, from approximate Mean High Water (MHW) to the 3-nautical-mile limit of California's State Waters. Offshore geologic units were delineated on the basis of integrated analyses of adjacent onshore geology with multibeam bathymetry and backscatter imagery, seafloor-sediment and rock samples, digital camera and video imagery, and high-resolution seismic-reflection profiles.

This part of DS 781 presents data for the depth-to-transition map of the Pigeon Point to Monterey, California, map region. The raster data file is included in "DepthToTransition_PigeonPointToMonterey.zip," which is accessible from https://doi.org/10.5066/F7N29V0Z. As part of the USGS's California State Waters Mapping Project, a 50-m-resolution grid of sediment thickness for the seafloor within the limit of California’s State Waters between Pigeon Point and southern Monterey Bay was generated from seismic-reflection data collected in 2009, 2010, and 2011 (USGS activities (S-15-10-NC, S-N1-09-MB, and S-06-11-MB) supplemented with outcrop and geologic structure from DS 781. The resulting grid was subtracted from regional bathymetry to determine the depth to the transitional surface. Contours at 5-meter intervals were derived from this depth-to-transition grid and are also available in this data release.

This part of DS 781 presents data for folds for the geologic and geomorphic map of the Offshore of Salt Point map area, California. The vector data file is included in "Folds_OffshoreSaltPoint.zip," which is accessible from https://pubs.usgs.gov/ds/781/OffshoreSaltPoint/data_catalog_OffshoreSaltPoint.html. These data accompany the pamphlet and map sheets of Johnson, S.Y., Dartnell, P., Golden, N.E., Hartwell, S.R., Erdey, M.D., Greene, H.G., Cochrane, G.R., Kvitek, R.G., Manson, M.W., Endris, C.A., Dieter, B.E., Watt, J.T., Krigsman, L.M., Sliter, R.W., Lowe, E.N., and Chin, J.L. (S.Y. Johnson and S.A. Cochran, eds.), 2015, California State Waters Map Series—Offshore of Salt Point, California: U.S. Geological Survey Open-File Report 2015–1098, pamphlet 37 p., 10 sheets, scale 1:24,000, https://doi.org/10.3133/ofr20151098. Folds were primarily mapped by interpretation of seismic reflection profile data (see field activity S-8-09-NC). The seismic reflection profiles were collected between 2007 and 2010.

This part of DS 781 presents data for the depth-to-transition map of the Bolinas to Pescadero, California, region. The raster data file is included in "DepthToTransition_BolinastoPescadero.zip," which is accessible from https://pubs.usgs.gov/ds/781/BolinasToPescadero/data_catalog_BolinasToPescadero.html. As part of the USGS's California State Waters Mapping Project, a 50-m grid of sediment thickness for the seafloor within the 3-nautical mile limit between Bolinas and Pescadero was generated from seismic-reflection data collected between 2006 and 2010, supplemented with outcrop and geologic structure (fault) information following the methodology of Wong (2012). Water depths determined from bathymetry data were added to the sediment thickness data to provide information on the depth to base of the post-LGM unit. Reference Cited: Wong, F. L., Phillips, E.L., Johnson, S.Y., and Sliter, R.W., 2012, Modeling of depth to base of Last Glacial Maximum and seafloor sediment thickness for the California State Waters Map Series, eastern Santa Barbara Channel, California: U.S. Geological Survey Open-File Report 2012-1161, 16 p. (available at https://pubs.usgs.gov/of/2012/1161/)