This part of DS 781 presents data for the isopachs for the Bolinas to Pescadero, California, region. The vector data file is included in "Isopachs_BolinastoPescadero.zip," which is accessible from https://pubs.usgs.gov/ds/781/BolinasToPescadero/data_catalog_BolinasToPescadero.html. As part of the USGS's California Seafloor Mapping Program, a 50-m grid of sediment thickness for the seafloor within the 3-nautical-mile limit of California's State Waters between offshore Offshore Bolinas and offshore Pescadero was generated from seismic-reflection data collected between 2006 and 2010, supplemented with outcrop and geologic structure (fault) information following the methodology of Wong (2012). Reference Cited: Wong, F. L., Phillips, E.L., Johnson, S.Y., and Sliter, R.W., 2012, Modeling of depth to base of Last Glacial Maximum and seafloor sediment thickness for the California State Waters Map Series, eastern Santa Barbara Channel, California: U.S. Geological Survey Open-File Report 2012-1161, 16 p. (available at https://pubs.usgs.gov/of/2012/1161/)

This part of DS 781 presents data for the sediment-thickness isopachs for the Pigeon Point to Monterey Bay, California, map region. The vector data file is included in "Isopachs_PigeonPointToMonterey.zip," which is accessible from https://doi.org/10.5066/F7N29V0Z. As part of the USGS's California State Waters Mapping Project, a 50-m-resolution grid of sediment thickness for the seafloor within the limit of California’s State Waters between Pigeon Point and southern Monterey Bay was generated from seismic-reflection data collected in 2009, 2010, and 2011 (USGS activities (S-15-10-NC, S-N1-09-MB, and S-06-11-MB) supplemented with outcrop and geologic structure from DS 781. Isopach contours at 2.5-meter intervals were derived from this sediment-thickness grid.

This part of DS 781 presents data for the isopachs for the Santa Barbara Channel, California, region. The vector data file is included in "Isopachs_SantaBarbaraChannel.zip," which is accessible from https://pubs.usgs.gov/ds/781/SantaBarbaraChannel/data_catalog_SantaBarbaraChannel.html. As part of the USGS's California Seafloor Mapping Program, a 50-m grid of sediment thickness for the seafloor within the 3-nautical-mile limit of California's State Waters from the Offshore of Refugio Beach map area to the Hueneme Canyon and vicinity map area was generated from seismic-reflection profile data, collected in 2007 and 2008 (USGS activities Z-3-07-SC and S-7-08-SC), supplemented with outcrop and geologic structure data from DS 781. The resulting grid covers an area of approximately 600 sq km. Sediment thickness contours (isopachs) at 2.5-meter intervals were derived from this grid.

This part of DS 781 presents data for the transgressive contours for the Salt Point to Drakes Bay, California, region. The vector file is included in "TransgressiveContours_SaltPointToDrakesBay.zip," which is accessible from https://pubs.usgs.gov/ds/781/SaltPointToDrakesBay/data_catalog_SaltPointToDrakesBay.html. As part of the USGS's California State Waters Mapping Project, a 20-m grid of depth to the transgressive surface of the last glacial maximum was generated for the areas within the 3-nautical mile limit between Salt Point and Drakes Bay was generated from seismic-reflection data collected in 2009 supplemented with outcrop and geologic structure from DS 781. The resulting grid covers an area of approximately 550 sq km. The depth to the transgressive surface of the Last Glacial Maximum ranges between 0 and 102 meters.

This part of DS 781 presents data for the isopachs for the Point Conception to Hueneme Canyon, California, region. The vector data file is included in "Isopachs_PointConceptionToHuenemeCanyon.zip," which is accessible from https://doi.org/10.5066/F7891424. As part of the USGS's California State Waters Mapping Project, a 50-m grid of sediment thickness for the seafloor within the 3-nautical mile limit between Point Conception and Hueneme Canyon was generated from seismic-reflection data collected in 2014 (USGS activity 2014-632-FA) supplemented with outcrop and geologic structure (fault) information following the methodology of Wong (2012). This sediment thickness layer was merged with a previously published sediment thickness grid for the Santa Barbara Channel region (available at https://pubs.usgs.gov/ds/781/SantaBarbaraChannel/data_catalog_SantaBarbaraChannel.html). This polyline shapefile provides the sediment-thickness isopachs to accompany the grid layer. Reference Cited: Wong, F. L., Phillips, E.L., Johnson, S.Y., and Sliter, R.W., 2012, Modeling of depth to base of Last Glacial Maximum and seafloor sediment thickness for the California State Waters Map Series, eastern Santa Barbara Channel, California: U.S. Geological Survey Open-File Report 2012-1161, 16 p. (available at https://pubs.usgs.gov/of/2012/1161/)

This part of DS 781 presents data for the isopachs of the Point Sur to Point Arguello, California, region. The vector data file is included in the “Isopachs_PointSurToPointArguello.zip,” which is accessible from https://doi.org/10.5066/P97CZ0T7. As part of the USGS's California State Waters Mapping Project, a 50-m grid of sediment thickness for the seafloor within the 3-nautical mile limit between Point Sur and Point Arguello was generated from seismic-reflection data collected between 2008 and 2014, and supplemented with geologic structure (fault and fold) information following the methodology of Wong (2012). Reference Cited: Wong, F. L., Phillips, E.L., Johnson, S.Y., and Sliter, R.W., 2012, Modeling of depth to base of Last Glacial Maximum and seafloor sediment thickness for the California State Waters Map Series, eastern Santa Barbara Channel, California: U.S. Geological Survey Open-File Report 2012-1161, 16 p. (available at https://pubs.usgs.gov/of/2012/1161/).

This part of DS 781 presents data for the sediment-thickness map of the Salt Point to Drakes Bay, California, region. The raster data file is included in "SedimentThickness_SaltPointToDrakesBay.zip," which is accessible from https://pubs.usgs.gov/ds/781/SaltPointToDrakesBay/data_catalog_SaltPointToDrakesBay.html. As part of the USGS's California State Waters Mapping Project, a 20-m grid of sediment thickness for the seafloor within the 3-nautical mile limit between Salt Point and Drakes Bay was generated from seismic-reflection data collected in 2009 supplemented with outcrop and geologic structure from DS 781. The resulting grid covers an area of approximately 717 sq km. The volume of sediment accumulated since the Last Glacial Maximum is approximately 6,800 million cubic meters. Contours at 2.5-meter intervals were derived from this grid.

This part of DS 781 presents data for the isopachs of the Punta Gorda to Point Arena, California, region. The vector data file is included in the "Isopachs_PuntaGordaToPointArena.zip," which is accessible from https://doi.org/10.5066/P9PNNI9H. As part of the USGS's California State Waters Mapping Project, a 50-m grid of sediment thickness for the seafloor within the 3-nautical mile limit between Punta Gorda and Point Arena was generated from seismic-reflection data collected between 2010 and 2012, and supplemented with geologic structure (fault) information following the methodology of Wong (2012). Reference Cited: Wong, F. L., Phillips, E.L., Johnson, S.Y., and Sliter, R.W., 2012, Modeling of depth to base of Last Glacial Maximum and seafloor sediment thickness for the California State Waters Map Series, eastern Santa Barbara Channel, California: U.S. Geological Survey Open-File Report 2012-1161, 16 p. (available at https://pubs.usgs.gov/of/2012/1161/).

This part of DS 781 presents data for the geologic and geomorphic map of the Offshore of Salt Point map area, California. The vector data file is included in "Geology_OffshoreSaltPoint.zip," which is accessible from https://pubs.usgs.gov/ds/781/OffshoreSaltPoint/data_catalog_OffshoreSaltPoint.html. These data accompany the pamphlet and map sheets of Johnson, S.Y., Dartnell, P., Golden, N.E., Hartwell, S.R., Erdey, M.D., Greene, H.G., Cochrane, G.R., Kvitek, R.G., Manson, M.W., Endris, C.A., Dieter, B.E., Watt, J.T., Krigsman, L.M., Sliter, R.W., Lowe, E.N., and Chin, J.L. (S.Y. Johnson and S.A. Cochran, eds.), 2015, California State Waters Map Series—Offshore of Salt Point, California: U.S. Geological Survey Open-File Report 2015–1098, pamphlet 37 p., 10 sheets, scale 1:24,000, https://doi.org/10.3133/ofr20151098. Marine geology and geomorphology was mapped in the Offshore of Salt Point map area, California, from approximate Mean High Water (MHW) to the 3-nautical-mile limit of California's State Waters. Offshore geologic units were delineated on the basis of integrated analyses of adjacent onshore geology with multibeam bathymetry and backscatter imagery, seafloor-sediment and rock samples, digital camera and video imagery, and high-resolution seismic-reflection profiles.

This part of DS 781 presents data for the bathymetric contours for several seafloor maps of the Offshore of Salt Point map area, California. The vector data file is included in "Contours_OffshoreSaltPoint.zip," which is accessible from https://pubs.usgs.gov/ds/781/OffshoreSaltPoint/data_catalog_OffshoreSaltPoint.html. These data accompany the pamphlet and map sheets of Johnson, S.Y., Dartnell, P., Golden, N.E., Hartwell, S.R., Erdey, M.D., Greene, H.G., Cochrane, G.R., Kvitek, R.G., Manson, M.W., Endris, C.A., Dieter, B.E., Watt, J.T., Krigsman, L.M., Sliter, R.W., Lowe, E.N., and Chin, J.L. (S.Y. Johnson and S.A. Cochran, eds.), 2015, California State Waters Map Series—Offshore of Salt Point, California: U.S. Geological Survey Open-File Report 2015–1098, pamphlet 37 p., 10 sheets, scale 1:24,000, https://doi.org/10.3133/ofr20151098. 10-m interval contours of the Offshore of SaltPoint map area, California, were generated from bathymetry data collected by California State University, Monterey Bay (CSUMB) and by Fugro Pelagos. Mapping was completed between 2007 and 2010, using a combination of 200-kHz and 400-kHz Reson 7125, and 244-kHz Reson 8101 multibeam echosounders, as well as 468-kHz SEA SWATHPlus interferometric system. These mapping missions combined to collect bathymetry from about the 10-m isobath to beyond the 3-nautical-mile limit of California State Waters. Bathymetric contours at 10-m intervals were generated from a bathymetric surface model. The most continuous contour segments were preserved while smaller segments and isolated island polygons were excluded from the final output. Contours were smoothed via a polynomial approximation with exponential kernel (PAEK) algorithm using a tolerance value of 60 m. The contours were then clipped to the boundary of the map area. These data are not intended for navigational purposes.