This dataset contains geochemical analyses of produced fluids from the Utah FORGE site, specifically from wells 16A(78)-32, 16B(78)-32, and 58-32, collected during various stimulation, flowback, and circulation tests conducted between 2022 and 2024. The data contains element concentrations, pH, and dissolved gas compositions. Geochemical analyses for 2022 and 2023 were performed at the Brigham Young University geochemistry laboratory, while the 2024 results were obtained from Thermochem. Dry gas samples were collected using a mini-separator attached to the single-phase production line between the wellhead and separator, where fluid was flashed to atmospheric pressure. Gas concentrations were recalculated to a single phase reservoir liquid based on heat and mass balance expressions. Additional contextual information, including interpretations of geochemical trends and reservoir behavior, is available in the included report from Simmons et al. (2025), which was presented at the Stanford Geothermal Workshop in February 2025.

This report provides a first-order assessment of the producible energy from the Utah FORGE EGS reservoir, based on stimulation and circulation testing in 2024. The assessment is based on a stored heat calculation for a cylindrical volume of stimulated hot dry rock enveloping the deviated legs of wells 16A(78)-32 and 16B(78)-32, and conservative estimates for recoverable energy. It also shows the potential for increased power production with deepening of the reservoir. The results are compared with the power produced during the 27-day circulation test in August-September 2024.

Geochemical data for cold groundwaters and produced geothermal fluids around the Utah FORGE site. The data is compiled into four tables in the attached Excel File. Table 1 is a compilation of compositions (anions, cations, weak acids, oxygen, hydrogen, and carbon isotopes) for cold groundwaters and produced geothermal waters in the Milford valley, Utah. Table 2 is a compilation of noble gas (He, Ne, Ar) and He and Ne isotopic compositions for cold groundwaters and produced geothermal waters in the Milford valley, Utah. Table 3 provides values for calculated advective and diffusive fluxes of helium. Table 4 provides values of calculated subsurface stored heat between the Opal Mound fault and the Utah FORGE site, which are related to volumes of recently solidified magmatic heat sources.

Geochemical data for cold groundwaters and produced geothermal fluids around the Utah FORGE site. The data is compiled into four tables in the attached Excel File. Table 1 is a compilation of compositions (anions, cations, weak acids, oxygen, hydrogen, and carbon isotopes) for cold groundwaters and produced geothermal waters in the Milford valley, Utah. Table 2 is a compilation of noble gas (He, Ne, Ar) and He and Ne isotopic compositions for cold groundwaters and produced geothermal waters in the Milford valley, Utah. Table 3 provides values for calculated advective and diffusive fluxes of helium. Table 4 provides values of calculated subsurface stored heat between the Opal Mound fault and the Utah FORGE site, which are related to volumes of recently solidified magmatic heat sources. The associated paper for this study will be open access (Simmons, S.F., and Kirby, S. 2024. Formation of a Large Cold Groundwater Mantle Helium Anomaly and High Temperature Geothermal Resources in Response to Bimodal Magmatism near Roosevelt Hot Springs and Utah FORGE, Milford Valley, southwest Utah. Geochemistry, Geophysics, Geosystems, in press.).

This data includes a document that describes the effort to collect and analyze water and gas samples from deep Utah FORGE wells 16A(78)-32, 58-32, 56-32 and 78B-32 along with additional pdf files showing ThermoChem's analyses attached as an appendix.

This dataset contains groundwater geochemistry from several wells in North Milford Valley, Utah, in the region of the Utah FORGE project (Phase 2c). Readme file that discusses the data contained in the Excel spreadsheet. Data include GPS coordinates (UTM, Lat-Long), sampling temperature, pH, Li, Na, K, Ca, Mg, SiO2, B, Cl, F, SO4, HCO3, oxygen, and hydrogen isotopes. Analyses were performed at the Utah State Laboratory and the University of Minnesota. The zipped archive includes Excel and csv format spreadsheets, a shapefile map with well locations, and a readme text file with additional information. The zip is updated data from October 2021.

This dataset contains groundwater geochemistry from several wells in North Milford Valley, Utah, in the region of the Utah FORGE project (Phase 2c). Readme file that discusses the data contained in the Excel spreadsheet. Data include GPS coordinates (UTM, Lat-Long), sampling temperature, pH, Li, Na, K, Ca, Mg, SiO2, B, Cl, F, SO4, HCO3, oxygen, and hydrogen isotopes. Analyses were performed at the Utah State Laboratory and the University of Minnesota. The zipped archive includes Excel and csv format spreadsheets, a shapefile map with well locations, and a readme text file with additional information. The zip is updated data from October 2021.

This dataset contains core-flood experimental results from the Utah FORGE project, generated through laboratory tests at Lawrence Livermore National Laboratory. The experiments were conducted at temperatures of 100C and 200C using core samples from the 16A(78)-32 well. The primary objectives of these tests were to determine the change in calculated hydraulic fracture and permeability over time, under constant confining pressure, in predominantly constant flowrate conditions, while monitoring effluent chemistry as a function of time. The dataset includes measurements related to elapsed time, sample pH, elemental concentrations, and pressure conditions at different core depths. Additional data captures inlet and outlet pressures, pump flowrate, brine temperature, reactor pressure, and calculated hydraulic parameters.

A database of groundwater chemistry in the Great Basin, USA. The data is located at the Nevada Bureau of Mines and Geology. This contains data relevant to the Utah FORGE site.

A database of groundwater chemistry in the Great Basin, USA. The data is located at the Nevada Bureau of Mines and Geology. This contains data relevant to the Utah FORGE site.