This record describes sub bottom profiler data collected on RV Investigator voyage IN2025_V04, ['Untangling the causes of change over 25 years in the southeast marine ecosystem - Voyage IV'] which departed Hobart on 27/05/2025 and returned to Hobart on 28/06/2025. The Kongsberg SBP29 (sub bottom profiler) was used to acquire data containing the specular reflections at different sediment interfaces below the seafloor. The SBP29 provides a 3° by 3° angular resolution. The echosounder's frequency sweep range is from 2 to 9 kHz. The SBP29 was logged continuously on the shelf for the extent of the voyage. Data are stored in .raw (1,111 files 26.7 GB) raw and .seg (1,094 files 26.3 GB) segy formats at CSIRO. The segy format data had a real time processing stream applied, which applies gain, a gain correction, matched filter with replica shaping, an attribute calculation for instantaneous amplitude and time variable gain. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request

This record describes sub bottom profiler data collected on RV Investigator voyage IN2022_V06, titled "Integrated Marine Observing System: monitoring of East Australian Current property transports at 27 degrees South." The voyage took place between July 14 and July 30, 2022 (AEST), departing from Brisbane and returning to Brisbane. The Kongsberg SBP120 (sub bottom profiler) was used to acquire data containing the specular reflections at different sediment interfaces below the seafloor. The SBP120 provides a 3° by 3° angular resolution. The echosounder's frequency sweep range is from 2.5 to 7 kHz. The SBP120 was logged continuously for the extent of the voyage. Data are stored in .raw (334 files 6.56 GB) raw and .seg (332 files 6.53 GB) segy formats at CSIRO. The segy format data had a real time processing stream applied, which applies gain, a gain correction, matched filter with replica shaping, an attribute calculation for instantaneous amplitude and time variable gain. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request

This record describes sub bottom profiler data collected on RV Investigator voyage IN2021_V03, titled "Integrated Marine Observing System: monitoring of East Australian Current property transports at 27 degrees South (multi-year)." The voyage took place from Hobart (TAS) to Brisbane (QLD) between May 8 and June 3, 2021. The Kongsberg SBP120 (sub bottom profiler) was used to acquire data containing the specular reflections at different sediment interfaces below the seafloor. The SBP120 provides a 3° by 3° angular resolution. The echosounder's frequency sweep range is from 2.5 to 7 kHz. The SBP120 was logged continuously for the extent of the voyage. Data are stored in .raw (9,960 files 20.9 GB) raw and .seg (9,956 files 20.8 GB) segy formats at CSIRO. The segy format data had a real time processing stream applied, which applies gain, a gain correction, matched filter with replica shaping, an attribute calculation for instantaneous amplitude and time variable gain. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request

This record describes sub bottom profiler data collected on RV Investigator voyage IN2019_V05, titled: "Integrated Marine Observing System: monitoring of East Australian Current property transports at 27 degrees South." The voyage took place between September 9 and September 29, 2019 departing from Brisbane (QLD) and arriving in Brisbane. The Kongsberg SBP120 (sub bottom profiler) was used to acquire data containing the specular reflections at different sediment interfaces below the seafloor. The SBP120 provides a 3° by 3° angular resolution. The echosounder's frequency sweep range is from 2.5 to 7 kHz. The SBP120 was logged sporadically for the extent of the voyage. Data are stored in .raw (598 files 5.6 GB) raw and .seg (1,210 files 11.1 GB) segy formats at CSIRO. The segy format data had a real time processing stream applied, which applies gain, a gain correction, matched filter with replica shaping, an attribute calculation for instantaneous amplitude and time variable gain. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request

This record describes sub bottom profiler data collected on RV Investigator voyage IN2023_E01, Sea trials and Calibrations which departed Fremantle on the 06/01/2023 and returned to Fremantle on the 12/01/2023 (UTC). The Kongsberg SBP120 (sub bottom profiler) was used to acquire data containing the specular reflections at different sediment interfaces below the seafloor. The SBP120 provides a 3° by 3° angular resolution. The echosounder's frequency sweep range is from 2.5 to 7 kHz. The SBP120 was logged continuously for the extent of the voyage. Data are stored in .raw (271 files 5.99 GB) raw and .seg (270 files 5.93 GB) segy formats at CSIRO. The segy format data had a real time processing stream applied, which applies gain, a gain correction, matched filter with replica shaping, an attribute calculation for instantaneous amplitude and time variable gain. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request

This record describes sub bottom profiler data collected on the RV Investigator voyage IN2023_V04, International nutrient inter-comparison Voyage (INIV) which departed Hobart on the 05/06/23 and returned to Hobart on the 18/06/23. The Kongsberg SBP120 (sub bottom profiler) was used to acquire data containing the specular reflections at different sediment interfaces below the seafloor. The SBP120 provides a 3° by 3° angular resolution. The echosounder's frequency sweep range is from 2.5 to 7 kHz. The SBP120 was logged sporadically for the extent of the voyage. Data are stored in .raw (247 files 5.39 GB) raw and .seg (255 files 5.34 GB) segy formats at CSIRO. The segy format data had a real time processing stream applied, which applies gain, a gain correction, matched filter with replica shaping, an attribute calculation for instantaneous amplitude and time variable gain. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes sub bottom profiler data collected on RV Investigator voyage IN2024_T02, Brisbane to Singapore Transit which departed Brisbane on the 8th July 2024 and returned to Singapore on the 23rd July 2024. The Kongsberg SBP120 (sub bottom profiler) was used to acquire data containing the specular reflections at different sediment interfaces below the seafloor. The SBP120 provides a 3° by 3° angular resolution. The echosounder's frequency sweep range is from 2.5 to 7 kHz. The SBP120 was logged continuously for the extent of the voyage. Data are stored in .raw (982 files 23.8 GB) raw and .seg (970 files 23.5 GB) segy formats at CSIRO. The segy format data had a real time processing stream applied, which applies gain, a gain correction, matched filter with replica shaping, an attribute calculation for instantaneous amplitude and time variable gain. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request

This record describes sub bottom profiler data collected on RV Investigator voyage IN2021_E01 (Trials and Calibration), which departed Hobart on the 10th November 2021 and returned to Hobart on the 14th November 2021. The Kongsberg SBP120 (sub bottom profiler) was used to acquire data containing the specular reflections at different sediment interfaces below the seafloor. The SBP120 provides a 3° by 3° angular resolution. The echosounder's frequency sweep range is from 2.5 to 7 kHz. The SBP120 was logged [continuously/sporadically] for the extent of the voyage. Data are stored in .raw (596 files, 1.81GB) raw and .seg (595 files, 1.8 GB) segy formats at CSIRO. The segy format data had a real time processing stream applied, which applies gain, a gain correction, bandpass filter (for depths < ~200m) or matched filter with replica shaping (for depths > ~200 m), and time variable gain. No attribute calculation for instantaneous amplitude was applied. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request

This record describes sub bottom profiler data collected on RV Investigator voyage IN2024_V02, "SOTS: Southern Ocean Time Series automated moorings for climate and carbon cycle studies southwest of Tasmania." The voyage took place between March 31, 2024 and April 19, 2024 (AEST), departing from Hobart and returning to Hobart. The Kongsberg SBP120 (sub bottom profiler) was used to acquire data containing the specular reflections at different sediment interfaces below the seafloor. The SBP120 provides a 3° by 3° angular resolution. The echosounder's frequency sweep range is from 2.5 to 7 kHz. The SBP120 was logged continuously for the extent of the voyage except when stopped on station and following our standard cetacean observation and reporting guidelines while transiting through Marine Parks. Data are stored in .raw (198 files 4.26 GB) raw and .seg (197 files 4.22 GB) segy formats at CSIRO. The segy format data had a real time processing stream applied, which applies gain, a gain correction, matched filter with replica shaping, an attribute calculation for instantaneous amplitude and time variable gain. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes sub bottom profiler data collected on RV Investigator voyage IN2024_E01, 'Trials and Calibrations' which departed Hobart on the 28th October and returned to Hobart on the 6th November 2024. The Kongsberg SBP29 (sub bottom profiler) was used to acquire data containing the specular reflections at different sediment interfaces below the seafloor. The SBP29 provides a 3° by 3° angular resolution. The echosounder's frequency sweep range is from 2 to 9 kHz. The SBP29 was logged continuously for the extent of the voyage. NOTE: The system was newly installed in Singapore as part of the vessel's mid-life refit and this voyage constituted the formal Sea Acceptance Tests (SAT) for the system. Data are stored in .raw (50 files 859 MB) raw and .seg (51 files 850 MB) segy formats at CSIRO. The segy format data had a real time processing stream applied, which applies gain, a gain correction, and matched filter with replica shaping (for water depths typically >200m) or Bandpass filtering 2-9 kHz (in water depths typically <200 m). Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request