This dataset is available on Brisbane City Council’s open data website – data.brisbane.qld.gov.au. The site provides additional features for viewing and interacting with the data and for downloading the data in various formats. This dataset published by Brisbane City Council contains South East Queensland waterway basin areas. It covers the area from approximately Noosa to the north, Toowoomba to the west and the New South Wales state border to the south. Basins are areas of land determined by topographic features in the landscape, where water from rain drains downhill into various watercourses and drainage features such as a river, lake, dam, wetland, sea or ocean.

This dataset is available on Brisbane City Council’s open data website – data.brisbane.qld.gov.au. The site provides additional features for viewing and interacting with the data and for downloading the data in various formats. Waterway sub-catchments are smaller divisions within a larger waterway catchment area, which represents a more specific area of land that contributes to the flow of water within Brisbane City Council's waterways. Like catchments, a sub-catchment is typically delineated based on the natural drainage patterns of the land, such as the flow of streams or rivers. It is defined by the topographic features and the boundaries of the land that drain into a specific tributary or section of the larger catchment.

This dataset is available on Brisbane City Council’s open data website – data.brisbane.qld.gov.au. The site provides additional features for viewing and interacting with the data and for downloading the data in various formats. This information provides a graphical representation of the locations of the existing (as constructed) stormwater pipes in the Brisbane City Council local government area. It can be combined with other Stormwater data to provide the entire Stormwater Network. Not all assets within the network are owned, and maintained by Brisbane City Council. A Stormwater Pipe is a fixed structure used to direct stormwater runoff away from populated areas.

This dataset is available on Brisbane City Council’s open data website – data.brisbane.qld.gov.au. The site provides additional features for viewing and interacting with the data and for downloading the data in various formats. This information provides a graphical representation of the locations of the existing (as constructed) stormwater surface drains in the Brisbane City Council local government area. It can be combined with other Stormwater data to provide the entire Stormwater Network. Not all assets within the network are owned, and maintained by Brisbane City Council. Surface Drains represent above-ground, exposed stormwater flow paths. These may be natural features (Natural Waterway, Open Channel) unformed features (Flat Open Surface, Overland Flowpath), or purpose-built structures (Scour Protection).

This dataset is available on Brisbane City Council’s open data website – data.brisbane.qld.gov.au. The site provides additional features for viewing and interacting with the data and for downloading the data in various formats. Brisbane City Plan 2014 is Brisbane City Council's plan for the future development of Brisbane. Brisbane City Plan 2014 is regularly updated with new or amended information. To stay informed about City Plan, including proposed amendments and to receive other Council planning and development updates, you can register your interest. This feature class is shown on the Waterway corridors overlay map (map reference: OM-023.2). This feature class includes the following map layers: (a) Waterway centreline. For information about the overlay and how it is applied, please refer to the Brisbane City Plan 2014 document.

This dataset is available on Brisbane City Council’s open data website – data.brisbane.qld.gov.au. The site provides additional features for viewing and interacting with the data and for downloading the data in various formats. This dataset includes culverts within the Brisbane City Council area. Culverts are represented as lines that show the length and orientation of the culvert. Culverts are structures that manage the flow of stormwater runoff within a drainage system. Often they are used to provide a stormwater passage greater than 0.6m2 waterway area for water to pass beneath roads, paths and rail to manage flooding and erosion. Not all culverts in this dataset are owned by Brisbane City Council. Ownership is included in the data.

This dataset is available on Brisbane City Council’s open data website – data.brisbane.qld.gov.au. The site provides additional features for viewing and interacting with the data and for downloading the data in various formats. Brisbane City Council detail plan areas can be used to locate the relevant Detail Plans on Brisbane Images. The Detail Plans provide a dated record of Brisbane’s built environment in addition to contour levels. They were initially created to plan for installation of sewerage pipes across the city. The dates for the individual detail plans range from 1912 to 1973, depending on proximity to the inner city. However, the early detail plans were manually updated after the publication date on the plans. Therefore, it cannot be assumed that everything shown on the published plan was there at the date printed on the plan. Exact dates for each plan can be determined via the Index registers held by City Archives. Detail Plans can show the outline of various buildings including land boundaries, fencing, house names and outbuildings within an area. The amount of information recorded however reduces after 1945 as the survey work required less detail and from the late 1960s the plans were mapped from aerial images. Note the original survey books which include the review dates for each plan can be viewed at the City Archives. This dataset provides the boundary of the area for each Detail Plan and the relevant plan number for locating each plan on Brisbane images. Most Detail plan numbers are numerical. Detail Plan numbers starting with S are for the Sandgate area and starting with W are for Wynnum and Manly. On the Map tab, a Click to Search link has been created where a Detailed Plan Number exists. Click on any plan area and use the Click to Search link to start a search on Brisbane Images. The plans are progressively being uploaded to Brisbane Images, so if the search link for a particular Detail Plan Number on the Map tab does not retrieve a result, please contact City Archives and a staff member will upload the plan. More information about City Archives or Historical material can be found on the Brisbane City Council website.

This dataset is available on Brisbane City Council’s open data website – data.brisbane.qld.gov.au. The site provides additional features for viewing and interacting with the data and for downloading the data in various formats. This information provides a graphical representation of the locations of the existing (as constructed) stormwater water bodies in the Brisbane City Council local government area. It can be combined with other Stormwater data to provide the entire Stormwater Network. Not all assets within the network are owned, and maintained by Brisbane City Council. A Water Body is a point in the network at which a large volume of water is retained. This may be represented as either a detention basin or a dam. A detention basin affects the downstream progress of stormwater run-off in a controlled manner by using temporary storage areas and a metered outlet device. A dam is an artificially created storage basin.

This dataset is available on Brisbane City Council’s open data website – data.brisbane.qld.gov.au. The site provides additional features for viewing and interacting with the data and for downloading the data in various formats. This dataset published by Brisbane City Council contains the locations of South East Queensland railway lines. It covers the area from approximately Gympie to the north, Toowoomba to the west and the New South Wales state border to the south.

This dataset is available on Brisbane City Council’s open data website – data.brisbane.qld.gov.au. The site provides additional features for viewing and interacting with the data and for downloading the data in various formats. Brisbane City Plan 2014 is Brisbane City Council's plan for the future development of Brisbane. Brisbane City Plan 2014 is regularly updated with new or amended information. To stay informed about City Plan, including proposed amendments and to receive other Council planning and development updates, you can register your interest. This feature layer is shown on the Brisbane City Council LGIP maps - Service Catchment mapping. This feature layer includes the following categories: (a) Stormwater (map reference: A3); (b) Transport (road) (map reference: A4); (c) Public parks (map reference: A5); (d) Land for community facilities (map reference: A6); (e) Active and Public Transport (pathway network and ferry terminals) (map reference: A7) For more information about service catchments and how they are applied, please refer to the Brisbane City Plan 2014 document.